On Sat, Apr 06, 2013 at 03:18:55PM +0200, Michal Mazurek wrote:
> I upgraded my system to the latest snapshot with bsd.rd yesterday. I
> noticed the terminal (ctrl+alt+F1) font has changed. It also became very
> slow, but only when Xenocara is running. By slow I mean cating a file to
> stdout produces very jumpy output, the music playback is jumpy as well.
> Killing Xenocara returns it to normal.
What you are seeing is work to get accelarted X on intel graphics
hardware. This has the "side effect" that the console switched from VGA
text mode to framebuffer style and also that the console only is
accelerated if X is not running.
-Otto
>
> Here is the dmesg of the affected system (an old laptop):
>
>
> OpenBSD 5.3-current (GENERIC) #109: Thu Apr 4 09:59:15 MDT 2013
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Celeron(R) M processor 1.40GHz ("GenuineIntel" 686-class) 1.40
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,PERF
> real mem = 527822848 (503MB)
> avail mem = 507777024 (484MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 11/21/05, BIOS32 rev. 0 @ 0xf0000,
> SMBIOS rev. 2.3 @ 0xfc68f (23 entries)
> bios0: vendor Hewlett-Packard version "68DTD Ver. F.0C" date 11/21/2005
> bios0: Hewlett-Packard HP Compaq nx6110 (PY536ES#AKD)
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG
> acpi0: wakeup devices C068(S5) C0BB(S3) C0C2(S3) C0C3(S3) C0C4(S3) C0C5(S3)
> C0CC(S5) C1CD(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfec01000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 2 (C068)
> acpiprt1 at acpi0: bus 0 (C002)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1
> acpipwrres0 at acpi0: C1A6
> acpipwrres1 at acpi0: C1AE
> acpipwrres2 at acpi0: C1B5
> acpipwrres3 at acpi0: C1C5
> acpipwrres4 at acpi0: C244
> acpipwrres5 at acpi0: C245
> acpipwrres6 at acpi0: C246
> acpipwrres7 at acpi0: C247
> acpitz0 at acpi0: critical temperature is 102 degC
> acpitz1 at acpi0: critical temperature is 103 degC
> acpitz2 at acpi0: critical temperature is 102 degC
> acpitz3 at acpi0: critical temperature is 110 degC
> acpibat0 at acpi0: C174 model "Primary" serial 03121 2005/12/21 type LIon oem
> "Hewlett-Packard"
> acpibat1 at acpi0: C173 not present
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: C1E8
> acpibtn1 at acpi0: C1E9
> acpivideo0 at acpi0: C055
> bios0: ROM list: 0xc0000/0x10000!
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> inteldrm0 at vga1
> drm0 at inteldrm0
> inteldrm0: apic 1 int 16
> wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 23
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci1 at ppb0 bus 2
> iwi0 at pci1 dev 4 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: apic 1
> int 21, address 00:0e:35:41:65:91
> cbb0 at pci1 dev 6 function 0 "TI PCI7XX1 CardBus" rev 0x00: apic 1 int 18
> "TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 6 function 2 not configured
> bce0 at pci1 dev 14 function 0 "Broadcom BCM4401B1" rev 0x02: apic 1 int 16,
> address 00:14:c2:e5:4a:64
> bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
> pcmcia0 at cardslot0
> auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int
> 21, ICH6 AC97
> ac97: codec id 0x41445374 (Analog Devices AD1981B)
> ac97: codec features headphone, 20 bit DAC, No 3D Stereo
> audio0 at auich0
> "Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4025GAS>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-L532M, HR08> ATAPI
> 5/cdrom removable
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:0:1): using PIO mode 4, DMA mode 2
> pciide0: channel 1 ignored (disabled)
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 6.2
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "vendor 0x04fc USB
> Multi-Smart Mouse" rev 2.00/16.11 addr 2
> uhidev0: iclass 3/1, 3 report ids
> ums0 at uhidev0 reportid 1: 5 buttons, Z dir
> wsmouse2 at ums0 mux 0
> uhid0 at uhidev0 reportid 3: input=2, output=0, feature=0
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a (a1b91d15922da01d.a) swap on wd0b dump on wd0b
>
>
> --
> Michal Mazurek
