I just configured a wireless device for hostap and put it on a bridge with
my wired network and a virtual ethernet device to give it an address. The
wired network is working fine, so if I solve this problem the wireless
should work fine, but the access point is not appearing in scans. I might
have missed an option for it to do this.
menger:root # cat /etc/hostname.run0
up media autoselect mediaopt hostap nwid KintaroADOBE chan 12 wpa wpakey
XXXXXXX wpaprotos wpa2
menger:root # cat /etc/hostname.fxp0
up
menger:root # cat /etc/hostname.vether0
inet 10.0.0.1 255.0.0.0 10.0.0.255
up
menger:root # cat /etc/hostname.bridge0
add vether0
add fxp0
add run0
up
menger:root # ifconfig run0
run0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:22:75:8e:f2:f8
priority: 4
groups: wlan
media: IEEE802.11 autoselect (DS1 mode 11g)
status: no network
ieee80211: nwid KintaroADOBE chan 12 wpakey XXXXXXXX wpaprotos wpa2
wpaakms psk wpaciphers tkip,ccmp wpagroupcipher tkip
inet6 fe80::222:75ff:fe8e:f2f8%run0 prefixlen 64 tentative scopeid
0x5
What have I missed?
--
www.johntate.org
