Stuart Henderson keeps old kernels around at ftp://sym.spacehopper.org/pub/OpenBSD/snapshots/i386/oldkern/
To help narrow down what change might have caused this, try and figure out the newest kernel that still works properly. Jeff Ross [[email protected]] wrote: > Hi all, > > Tonight I updated to the June 17 snapshot on my primary firewall. > Before updating carp has been working flawlessly, with this server > the primary and its twin the secondary. When I'd reboot the primary > the secondary would become master but only until the primary had > finished rebooting. After updating and reboot the primary's carp0 > and carp1 interfaces remain in INIT. > > I did run sysmerge and don't see anything apropos in the Running > -current section of the FAQ. > > My secondary firewall took over as carp master on reboot but I'm a > little leery of updating or even rebooting it to see if the primary > will take over--I'm 650 miles from the server room :-) > > dmesg, ifconfig -a and /etc/hostname* follow. > > Thanks, > > Jeff Ross > > OpenBSD 5.3-current (GENERIC.MP) #7: Mon Jun 17 12:17:04 MDT 2013 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP > cpu0: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF,PERF > real mem = 3757490176 (3583MB) > avail mem = 3684646912 (3513MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 03/29/05, BIOS32 rev. 0 @ > 0xf0010, SMBIOS rev. 2.3 @ 0xfa380 (61 entries) > bios0: vendor American Megatrends Inc. version "080010" date 03/29/2005 > bios0: SiMech R200 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S4 S5 > acpi0: tables DSDT FACP APIC OEMB > acpi0: wakeup devices PXHA(S4) PXHB(S4) EPA0(S4) EPA1(S4) EPB0(S4) > EPB1(S4) EPC0(S4) P0P1(S4) MC97(S4) USB1(S1) USB2(S1) EUSB(S4) > PS2K(S4) PS2M(S4) P0PC(S4) SLPB(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 200MHz > cpu1 at mainbus0: apid 6 (application processor) > cpu1: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz > cpu1: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF,PERF > cpu2 at mainbus0: apid 1 (application processor) > cpu2: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz > cpu2: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF,PERF > cpu3 at mainbus0: apid 7 (application processor) > cpu3: Intel(R) Xeon(TM) CPU 3.20GHz ("GenuineIntel" 686-class) 3.21 GHz > cpu3: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,LONG,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,CX16,xTPR,LAHF,PERF > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > ioapic1 at mainbus0: apid 11 pa 0xfec10000, version 20, 24 pins > ioapic1: misconfigured as apic 9, remapped to apid 11 > ioapic2 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins > ioapic2: misconfigured as apic 10, remapped to apid 9 > ioapic3 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins > ioapic3: misconfigured as apic 11, remapped to apid 10 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (EPA0) > acpiprt2 at acpi0: bus 3 (PXHA) > acpiprt3 at acpi0: bus 2 (PXHB) > acpiprt4 at acpi0: bus 4 (EPA1) > acpiprt5 at acpi0: bus 6 (P0P1) > acpiprt6 at acpi0: bus 5 (P0PC) > acpicpu0 at acpi0 > acpicpu1 at acpi0 > acpicpu2 at acpi0 > acpicpu3 at acpi0 > acpibtn0 at acpi0: PWRB > acpibtn1 at acpi0: SLPB > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x800 0xc8800/0x1000 0xc9800/0x1000 > ipmi at mainbus0 not configured > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel E7320 Host" rev 0x0c > ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c > pci1 at ppb0 bus 1 > ppb1 at pci1 dev 0 function 0 "Intel 6700PXH PCIE-PCIX" rev 0x09 > pci2 at ppb1 bus 3 > mpi0 at pci2 dev 5 function 0 "Symbios Logic 53c1030" rev 0xc1: msi > scsibus0 at mpi0: 16 targets, initiator 7 > ppb2 at pci1 dev 0 function 2 "Intel 6700PXH PCIE-PCIX" rev 0x09 > pci3 at ppb2 bus 2 > em0 at pci3 dev 1 function 0 "Intel 82546GB" rev 0x03: apic 10 int > 0, address 00:1b:21:15:6a:82 > em1 at pci3 dev 1 function 1 "Intel 82546GB" rev 0x03: apic 10 int > 1, address 00:1b:21:15:6a:83 > ppb3 at pci0 dev 3 function 0 "Intel E7520 PCIE" rev 0x0c > pci4 at ppb3 bus 4 > ppb4 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02 > pci5 at ppb4 bus 5 > em2 at pci5 dev 1 function 0 "Intel 82541GI" rev 0x05: apic 11 int > 2, address 00:30:48:87:2e:b0 > em3 at pci5 dev 2 function 0 "Intel 82541GI" rev 0x05: apic 11 int > 3, address 00:30:48:87:2e:b1 > uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 8 int 16 > uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 8 int 19 > "Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured > "Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured > ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 8 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a > pci6 at ppb5 bus 6 > vga1 at pci6 dev 2 function 0 "ATI Rage XL" rev 0x27 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02 > pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 disabled (no drives) > ichiic0 at pci0 dev 31 function 3 "Intel 6300ESB SMBus" rev 0x02: > apic 8 int 17 > iic0 at ichiic0 > lm1 at iic0 addr 0x2c: W83627HF > lm2 at iic0 addr 0x2f: W83792D rev D > spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM registered ECC PC2700CL2.5 > spdmem1 at iic0 addr 0x53: 1GB DDR SDRAM registered ECC PC2700CL2.5 > spdmem2 at iic0 addr 0x55: 1GB DDR SDRAM registered ECC PC2700CL2.5 > spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2700CL2.5 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x41 > lm3 at wbsio0 port 0x290/8: W83627HF > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > lm1: disabling sensors due to alias with lm3 > umass0 at uhub0 port 3 configuration 1 interface 0 "Imation Nano > Pro" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus1 at umass0: 2 targets, initiator 0 > sd0 at scsibus1 targ 1 lun 0: <Imation, Nano Pro, PMAP> SCSI0 > 0/direct removable serial.071806381903272E63D3 > sd0: 3822MB, 512 bytes/sector, 7827456 sectors > umass1 at uhub0 port 4 configuration 1 interface 0 "Imation Nano > Pro" rev 2.00/1.00 addr 3 > umass1: using SCSI over Bulk-Only > scsibus2 at umass1: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <Imation, Nano Pro, PMAP> SCSI0 > 0/direct removable serial.071806381C036D10AFE6 > sd1: 3822MB, 512 bytes/sector, 7827456 sectors > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (f68e09b9e44543c9.a) swap on sd0b dump on sd0b > carp: carp1 demoted group carp by 1 to 129 (carpdev) > carp: pfsync0 demoted group carp by 32 to 161 (pfsync init) > carp: pfsync0 demoted group pfsync by 32 to 32 (pfsync init) > carp: pfsync0 demoted group carp by 1 to 162 (pfsync bulk start) > carp: pfsync0 demoted group pfsync by 1 to 33 (pfsync bulk start) > carp: carp1 demoted group carp by -1 to 161 (carpdev) > carp: pfsync0 demoted group carp by -1 to 32 (pfsync bulk fail) > carp: pfsync0 demoted group pfsync by -1 to 32 (pfsync bulk fail) > carp: pfsync0 demoted group carp by -32 to 0 (pfsync init) > carp: pfsync0 demoted group pfsync by -32 to 0 (pfsync init) > pfsync: failed to receive bulk update > > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33192 > priority: 0 > groups: lo > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6 > inet 127.0.0.1 netmask 0xff000000 > em0: > flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> > mtu 1500 > lladdr 00:1b:21:15:6a:82 > priority: 0 > media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause) > status: active > inet6 fe80::21b:21ff:fe15:6a82%em0 prefixlen 64 scopeid 0x1 > em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:1b:21:15:6a:83 > priority: 0 > media: Ethernet autoselect (1000baseT > full-duplex,master,rxpause,txpause) > status: active > inet 192.168.255.1 netmask 0xffffff00 broadcast 192.168.255.255 > inet6 fe80::21b:21ff:fe15:6a83%em1 prefixlen 64 scopeid 0x2 > em2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:30:48:87:2e:b0 > priority: 0 > media: Ethernet autoselect (none) > status: no carrier > em3: > flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> > mtu 1500 > lladdr 00:30:48:87:2e:b1 > priority: 0 > media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause) > status: active > inet 10.31.16.8 netmask 0xffffff00 broadcast 10.31.16.255 > inet6 fe80::230:48ff:fe87:2eb1%em3 prefixlen 64 scopeid 0x4 > enc0: flags=0<> > priority: 0 > groups: enc > status: active > pfsync0: flags=41<UP,RUNNING> mtu 1500 > priority: 0 > pfsync: syncdev: em1 maxupd: 128 defer: off > groups: carp pfsync > pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33192 > priority: 0 > groups: pflog > carp0: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:00:5e:00:01:01 > priority: 0 > carp: INIT carpdev em0 vhid 1 advbase 1 advskew 0 > groups: carp > inet6 fe80::200:5eff:fe00:101%carp0 prefixlen 64 scopeid 0x8 > carp1: flags=8803<UP,BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > lladdr 00:00:5e:00:01:02 > priority: 0 > carp: INIT carpdev em3 vhid 2 advbase 1 advskew 0 > groups: carp > inet6 fe80::200:5eff:fe00:102%carp1 prefixlen 64 scopeid 0x9 > > /etc/hostname.carp0 > inet 69.144.146.94 255.255.255.252 69.144.146.255 vhid 1 pass wykids > carpdev em0 > > /etc/hostname.carp1 > inet 10.31.16.1 255.255.255.0 10.31.16.255 vhid 2 pass wykids carpdev em3 > > /etc/hostname.em0 > up > > /etc/hostname.em1 > !/etc/scripts/start_svscan.sh > inet 192.168.255.1 255.255.255.0 > > /etc/hostname.em3 > !/etc/scripts/start_svscan.sh > inet 10.31.16.8 255.255.255.0 > > /etc/hostname.pfsync0 > !/etc/scripts/start_svscan.sh > up syncdev em1 > > > /etc/scripts/start_svscan.sh > #!/bin/sh > /usr/bin/pgrep svscan > status=$? > if [ $status -eq 0 ] ; then > echo $status svscan already running! > else > echo $status starting svscan... > /bin/csh -cf '/command/svscanboot &' > /bin/sleep 5 > fi -- I'm not being defensive. Maybe you're the one that's being defensive. Maybe you should look at yourself once in awhile.
