> A/C adapter state: not connected Does this change if the A/C is plugged in? Was it really unplugged when you ran apm? That might explain the low frequency CPU setting.
> Performance adjustment mode: manual (599 MHz) > > Interesting is that the CPU is not running at full speed, which is 1600Mhz. What's your setperf set to? (sysctl hw.setperf) > I suppose this is part of the problem: > $ dmesg | grep acpi > acpi at bios0 function 0x0 not configured This is an APM machine. Not an ACPI one. A bunch of HP fixes went in. If you feel like experimenting more you can update to current and disable apm at boot and enable acpi. See what happens. > OpenBSD 5.2 (GENERIC) #278: Wed Aug 1 10:04:16 MDT 2012 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" > 686-class) 599 MHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2 > real mem = 536211456 (511MB) > avail mem = 516587520 (492MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 06/23/05, BIOS32 rev. 0 @ > 0xf0000, SMBIOS rev. 2.3 @ 0xfa1ee (31 entries) > bios0: vendor Hewlett-Packard version "68BDD Ver. F.14" date 06/23/2005 > bios0: Hewlett-Packard HP Compaq nc6000 (DU447EA#ABZ) > apm0 at bios0: Power Management spec V1.2 (BIOS managing devices) > acpi at bios0 function 0x0 not configured > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000 > > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0840/160 (8 entries) > pcibios0: bad IRQ table checksum > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf6360/160 (8 entries) > pcibios0: PCI Exclusive IRQs: 5 10 11 > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00) > pcibios0: PCI bus #5 is the last bus > bios0: ROM list: 0xc0000/0x10000 > cpu0 at mainbus0: (uniprocessor) > cpu0: Enhanced SpeedStep 599 MHz: speeds: 1600, 1400, 1200, 1000, > 800, 600 MHz > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 > intelagp0 at pchb0 > agp0 at intelagp0: aperture at 0xb0000000, size 0x10000000 > ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 > pci1 at ppb0 bus 1 > vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M10" rev 0x00 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > radeondrm0 at vga1: irq 10 > drm0 at radeondrm0 > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10 > uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 10 > uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 10 > ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 10 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83 > pci2 at ppb1 bus 2 > ath0 at pci2 dev 4 function 0 "Atheros AR5212" rev 0x01: irq 11 > ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3, WOR0W, address > 00:12:79:3d:3d:9c > cbb0 at pci2 dev 6 function 0 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 > cbb1 at pci2 dev 6 function 1 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 > "O2 Micro OZ711Mx Misc" rev 0x00 at pci2 dev 6 function 2 not configured > cbb2 at pci2 dev 6 function 3 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10 > bge0 at pci2 dev 14 function 0 "Broadcom BCM5705M Alt" rev 0x03, > BCM5705 A3 (0x3003): irq 11, address 00:08:02:e9:14:06 > > brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 > cardslot0 at cbb0 slot 0 flags 0 > cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20 > pcmcia0 at cardslot0 > cardslot1 at cbb1 slot 1 flags 0 > cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20 > pcmcia1 at cardslot1 > cardslot2 at cbb2 slot 2 flags 0 > cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20 > pcmcia2 at cardslot2 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: > 24-bit timer at 3579545Hz > pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: > DMA, channel 0 configured to compatibility, channel 1 configured to > compatibility > wd0 at pciide0 channel 0 drive 0: <IBM-DJSA-210> > wd0: 16-sector PIO, LBA, 5729MB, 11733120 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus0 at atapiscsi0: 2 targets > cd0 at scsibus0 targ 0 lun 0: <TEAC, DW-224E-A, A.2F> ATAPI 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 > auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq > 11, ICH4 AC97 > ac97: codec id 0x41445374 (Analog Devices AD1981B) > ac97: codec features headphone, 20 bit DAC, No 3D Stereo > audio0 at auich0 > "Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 5.9 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > mtrr: Pentium Pro MTRR support > uhidev0 at uhub1 port 2 configuration 1 interface 0 "Trust USB > OPTICAL MOUSE" rev 1.10/1.00 addr 2 > uhidev0: iclass 3/1 > ums0 at uhidev0: 3 buttons, Z dir > wsmouse2 at ums0 mux 0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (0e00445d79f00c64.a) swap on wd0b dump on wd0b
