Sorry for the noise. Should have read the FAQ first... http://www.openbsd.org/faq/current.html#20130812 explains the required firmware.
It's working now. On Sat, Aug 17, 2013, at 10:48, Byron Klippert wrote: > On Sat, Aug 17, 2013, at 2:07, Jonathan Gray wrote: > > Did you install the firmware first? > > Firmware? > > > > It seems odd that wsdisplay is not listed in your dmesg, is > > that just an omission on your side? > > The dmesg below is what was stored to /var/run/dmesg.boot which I was > able to copy once booted back into a working 5.3 snapshot. I'm assuming > the last characters were cut off as it locked up??? > > <snip> > sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct > fixed > sd2: 305245MB, 512 bytes/sector, 625142305 sectors > root on sd1a (99703daf44c458bd.a) swap on sd1b dump on sd1b > drm: initializing kernel modesetting (RV620 0x1002:0x95CC > 0x1002:0x2F43). > radeondrm0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M > used) > radeondrm0: GTT: 512M 0x0000000010000000 - 0x000 > </snip> > > > > > Anyway to get some more information you could build a kernel with: > > > > Index: drmP.h > > =================================================================== > > RCS file: /cvs/src/sys/dev/pci/drm/drmP.h,v > > retrieving revision 1.144 > > diff -u -p -r1.144 drmP.h > > --- drmP.h 14 Aug 2013 02:49:19 -0000 1.144 > > +++ drmP.h 17 Aug 2013 09:01:15 -0000 > > @@ -74,6 +74,8 @@ > > #include "drm_atomic.h" > > #include "agp.h" > > > > +#define DRMDEBUG > > + > > #define DRM_DEBUGBITS_DEBUG 0x1 > > #define DRM_DEBUGBITS_KMS 0x2 > > #define DRM_DEBUGBITS_FAILED_IOCTL 0x4 > > > Sorry no free time to compile new kernel... will try later. > > > > -- > Byron Klippert > byronklipp...@ml1.net > c. 867-336-1306 > -- Byron Klippert byronklipp...@ml1.net c. 867-336-1306
