Hi,

checking ACPI on my older thinkpad T600x I notice (running current snapshot of today) I don't seem th have ACPI. I know that some older Thinkpads did have APCI "disabled by bios to avoid interfering with windows" (back then of course support was bad), so I read.

I read in dmesg (full dmesg below)

apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured

I suppose that acpi is available but OpenBSD doesn't support my specific model?

(my previous laptop where I was developing some ACPI code broke, thus I put in the disk in this spare computer)

Riccardo


OpenBSD 5.4-current (GENERIC) #54: Sat Sep 14 13:36:19 MDT 2013
    t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 499 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,PSN,MMX,FXSR,SSE
real mem  = 334884864 (319MB)
avail mem = 317661184 (302MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/30/99, BIOS32 rev. 0 @ 0xfd820, SMBIOS rev. 2.2 @ 0xf7690 (55 entries)
bios0: vendor IBM version "ITET55WW" date 11/30/1999
bios0: IBM 26454EG
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd880/0x800
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf9d00/128 (6 entries)
pcibios0: PCI Exclusive IRQs: 11
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371AB PIIX4 ISA" rev 0x00)
pcibios0: PCI bus #5 is the last bus
bios0: ROM list: 0xc0000/0xc000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0x40000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2360" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 0 not configured
clcs0 at pci0 dev 6 function 0 "Cirrus Logic CS4280/46xx CrystalClear" rev 0x01: irq 11
ac97: codec id 0x43525913 (Cirrus Logic CS4297A rev 3)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02: unable to claim ownership from BIOS, SpeedStep disabled pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS421260H9AT00>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2302, 1617> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
ne3 at pcmcia0 function 0 "D-Link, DFE-670TXD, PC Card" port 0xa000/32, address 00:13:46:34:0d:62
nsphyter0 at ne3 phy 1: DP83815 10/100 PHY, rev. 0
root on wd0a (378dd2c6192ddec8.a) swap on wd0b dump on wd0b
clcs0: firmware loaded
audio0 at clcs0
wd0(pciide0:0:0): timeout
        type: ata
        c_bcount: 4096
        c_skip: 0
wd0a: device timeout writing fsbn 6592 of 6592-6599 (wd0 bn 6655; cn 6 tn 9 sn 40), retrying
wd0: soft error (corrected)
ne3: device timeout
ne3: device timeout
ne3: device timeout
ne3: device timeout

Reply via email to