Send a second time as this **** webmail-programm changed to HTML again... this mail should be better to read.
Hi there, I have this ancient IBM/lenovo T60 with me while working off-site. This machine used to be a reliable workhorse until recently. Since roughly around the time of the ABI changes to 64-bit time I get annoyed by 2~3 crashes per day. I usually run OpenBSD's latest snapshots on it and I can confirm that those snapshots are rock-solid. So here I am wondering if my I have to say farewell to my favorite worktool or if I missed some changes in the settings. E.g. one important Linux-binary (SoftMaker Office 2012) does not start up any more (and on startup the system complains that 'kern.emul.linux=1' is invalid). My next step would be to reinstall from the lastest snapshot-install54.iso to make shure everything is in sync. But if s.o. can provide additional advice I really would appreciate it. More infos needed? Time to say THANK YOU to the devs! (And yes - I did order 5.4 already!) Cheers, STEFAN --- OpenBSD 5.4-current (GENERIC.MP) #61: Sat Sep 14 14:04:00 MDT 2013 t...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Core(TM) Duo CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF real mem = 3219517440 (3070MB) avail mem = 3155156992 (3008MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 08/27/09, BIOS32 rev. 0 @ 0xfd6b0, SMBIOS rev. 2.4 @ 0xe0010 (68 entries) bios0: vendor LENOVO version "79ETE5WW (2.25 )" date 08/27/2009 bios0: LENOVO 200855G acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET BOOT SSDT SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3) USB7(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 166MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) Duo CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,MWAIT,VMX,EST,TM2,xTPR,PDCM,PERF ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus 4 (EXP2) acpiprt5 at acpi0: bus 12 (EXP3) acpiprt6 at acpi0: bus 21 (PCI1) acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: PUBS acpitz0 at acpi0: critical temperature is 127 degC acpitz1 at acpi0: critical temperature is 99 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 not present acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) bios0: ROM list: 0xc0000/0xfe00 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000! 0xe0000/0x10000! cpu0: Enhanced SpeedStep 1829 MHz: speeds: 1833, 1333, 1000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03 ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 1 int 16 pci1 at ppb0 bus 1 radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility X1300 M52-64" rev 0x00: apic 1 int 16 drm0 at radeondrm0 azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog Devices AD1981HD audio0 at azalia0 ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 20 pci2 at ppb1 bus 2 em0 at pci2 dev 0 function 0 "Intel 82573L" rev 0x00: msi, address 00:15:58:31:de:bd ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21 pci3 at ppb2 bus 3 wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:18:de:9c:fd:27 ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 22 pci4 at ppb3 bus 4 vendor "Renesas", unknown product 0x0015 (class serial bus subclass USB, rev 0x02) at pci4 dev 0 function 0 not configured ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 23 pci5 at ppb4 bus 12 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2 pci6 at ppb5 bus 21 cbb0 at pci6 dev 0 function 0 "TI PCI1510 CardBus" rev 0x00: apic 1 int 16 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0 pcmcia0 at cardslot0 ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6459GSXP> wd0: 16-sector PIO, LBA48, 610480MB, 1250263728 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 pciide0: channel 1 ignored (disabled) ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: <ATA, ST95005620AS, SD23> SCSI3 0/direct fixed naa.5000c5002aa9e1e8 sd0: 476940MB, 512 bytes/sector, 976773168 sectors ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 23 iic0 at ichiic0 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 wsmouse1 at pms0 mux 0 pms0: Synaptics touchpad, firmware 6.2 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 aps0 at isa0 port 0x1600/31 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges uhub5 at uhub0 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/77.61 addr 2 uhidev0 at uhub5 port 1 configuration 1 interface 0 "Logitech Trackball" rev 1.10/2.20 addr 3 uhidev0: iclass 3/1 ums0 at uhidev0: 3 buttons, Z dir wsmouse2 at ums0 mux 0 uhub6 at uhub5 port 2 "Genesys Logic USB2.0 Hub" rev 2.00/77.61 addr 4 ulpt0 at uhub6 port 1 configuration 1 interface 0 "Hewlett-Packard HP LaserJet 3055" rev 2.00/1.00 addr 5 ulpt0: using bi-directional mode ugen0 at uhub6 port 1 configuration 1 "Hewlett-Packard HP LaserJet 3055" rev 2.00/1.00 addr 5 ugen1 at uhub4 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (1e18fdc3ddb71e63.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted drm: initializing kernel modesetting (RV515 0x1002:0x7149 0x17AA:0x2005). radeondrm0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (64M used) radeondrm0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF ttm_pool_mm_shrink_init stub drm: PCIE GART of 512M enabled (table at 0x0000000000040000). radeondrm0: 1400x1050 wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation)