Otto is right. This looks like a PERC 3/SC. Since the passthrough
works everything else should work too. The firmware looks a little
old so you might want to upgrade that as well.
Send a "bioctl ami0" please.
On Nov 23, 2005, at 2:00 PM, Otto Moerbeek wrote:
On Wed, 23 Nov 2005, Gaby vanhegan wrote:
HI,
I've just upgraded to 3.8, hoping that ami/bioctl would support my
RAID card, which it doesn't:
ami0 at pci1 dev 14 function 1 "Intel 80960RP ATU" rev 0x02: irq 14
Dell 467/32b
ami0: FW 1.06, BIOS v1p00, 128MB RAM
ami0: 2 channels, 16 targets, 1 logical drives
scsibus0 at ami0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct
fixed
sd0: 17136MB, 2184 cyl, 255 head, 63 sec, 512 bytes/sec, 35094528 sec
total
scsibus1 at ami0: 16 targets
safte0 at scsibus1 targ 6 lun 0: <DELL, 1x6 SCSI BP, 5.47> SCSI2 3/
processor fixed
scsibus2 at ami0: 16 targets
If I can ask, which models of RAID card are being worked on for the
3.9 release?
I may be missing something obvious here, but this looks like the card
_is_ supported. What output where you expecting? What does bioctl ami0
print?
-Otto
