On Thu, 24 Nov 2005 09:23:32 -0700
Theo de Raadt <[EMAIL PROTECTED]> wrote:
> *classic* bug report. You completely fail to mention the machine
> type, or show a dmesg.
Actually, I sent the dmesg in my immediatelly previous message to the list
and therefore I didnt attach again.
As for the machine type, it's a completely generic laptop called X-Mobile C24i.
I really did forget to attach the md5 -t output so here it is:
$ sysctl hw | tail -2
hw.cpuspeed=1296
hw.setperf=100
$ md5 -t
MD5 time trial. Processing 10000 10000-byte blocks...
Digest = 52e5f9c9e6f656f3e1800dfa5579d089
Time = 0.691865 seconds
Speed = 144536867.741539 bytes/second
$ sudo sysctl -w hw.setperf=0
hw.setperf: 100 -> 0
$ sysctl hw | tail -2
hw.cpuspeed=1296
hw.setperf=0
$ md5 -t
MD5 time trial. Processing 10000 10000-byte blocks...
Digest = 52e5f9c9e6f656f3e1800dfa5579d089
Time = 0.693320 seconds
Speed = 144233542.952749 bytes/second
$ sudo sysctl -w hw.setperf=80
hw.setperf: 0 -> 80
$ sysctl hw | tail -2
hw.cpuspeed=750
hw.setperf=80
MD5 time trial. Processing 10000 10000-byte blocks...
Digest = 52e5f9c9e6f656f3e1800dfa5579d089
Time = 0.695775 seconds
Speed = 143724623.621142 bytes/second
It would appear that changing hw-setperf doesn't actually do anything at all
on this box. The dmesg says it has Speedstep though.
(dmesg attached again)
---
Lars Hansson
OpenBSD 3.8-current (GENERIC) #265: Wed Nov 23 15:06:35 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.30GHz ("GenuineIntel" 686-class) 1.30
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 234397696 (228904K)
avail mem = 206987264 (202136K)
using 2886 buffers containing 11821056 bytes (11544K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(17) BIOS, date 05/21/01, BIOS32 rev. 0 @ 0xe9b90
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xe7000/0x661
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe840/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xc800! 0xe0000/0x1800 0xe6000/0x1000!
cpu0 at mainbus0
esm at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82852GM Hub-PCI" rev 0x02
"Intel 82852GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82852GM Configuration" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82852GM AGP" rev 0x02: aperture at
0xb0000000, size 0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82852GM AGP" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 7
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci1 at ppb0 bus 1
cbb0 at pci1 dev 0 function 0 "Texas Instruments PCI1410 CardBus" rev 0x02: irq
5
rl0 at pci1 dev 2 function 0 "Realtek 8139" rev 0x10: irq 11, address
00:e0:4c:44:00:4e
rlphy0 at rl0 phy 0: RTL internal phy
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x0, lattimer 0x40
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2040AT>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QSI, CDRW/DVD SBW-243, TX08> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801DB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 5, ICH4 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655)
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask efe5 netmask efe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: vendor 0x04fc USB Wheel Mouse, rev 1.10/1.01, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhidev1 at uhub0 port 2 configuration 1 interface 0
uhidev1: CHESEN USB Keyboard, rev 1.10/1.10, addr 3, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1
uhidev2: CHESEN USB Keyboard, rev 1.10/1.10, addr 3, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=3, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: ac97 link rate calibration timed out after 1864715 us
