Hi All,
Excuse me for disturbing too much if so.
Have to 'disable auvia' in UKC to boot up 3.8 GENERIC on my SONY VAIO
PCG-FX77Z_BP(J). The same keeps on happening from 3.1 so -current
problably will not help.
I would be grateful if anyone of you would be so kind to give me basic
directions
on how to know which devices, functions and flags to use in UKC according to
dmesg from FreeBSD, FreeSBIE or Slack where VT82C686A and AC'97 works fine.
I did google and I will go to the Source if needed. Just thought that
it would be
faster to cut to the chase with few lines' assistance.
Thank you for your time while reading.
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: mobile AMD Athlon(tm) XP 1400+ ("AuthenticAMD" 686-class, 256KB
L2 cache) 1.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
cpu0: AMD Powernow: FID VID TTP
real mem = 133734400 (130600K)
avail mem = 115277824 (112576K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
User Kernel Config
UKC> disable auvia
70 auvia* disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/29/02, BIOS32 rev. 0 @ 0xfd6a0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd6a0/0x960
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf60/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x4000! 0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23DA-30>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA720 DVD/CDRW, 1.00> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40
"VIA VT82C686 AC97" rev 0x50 at pci0 dev 7 function 5 not configured
"VIA VT82C686 Modem" rev 0x30 at pci0 dev 7 function 6 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1420 CardBus" rev
0x00: irq 9
cbb1 at pci0 dev 10 function 1 "Texas Instruments PCI1420 CardBus" rev
0x00: irq 10
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci0 dev 14
function 0 not configured
rl0 at pci0 dev 16 function 0 "Realtek 8139" rev 0x10: irq 10 address
08:00:46:6d:f1:10
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
biomask ef4d netmask ef4d ttymask ffcf
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
