Hello,
I have an HP MicroServer N36L with HP's remote management card installed.
The card provides KVM-over-IP by presenting a video device and an emulated
USB keyboard and mouse to the system. The KVM is accessed via a Java (ugh)
applet in the card's web GUI.
When I open the KVM session, the video display works fine, and the
emulated keyboard works at the boot prompt. However, it doesn't work on
the console once the system has booted. I don't see an error anywhere, but
typing into the KVM session simply has no effect at all.
Opening the KVM session after the system is booted causes this to appear
in the dmesg; apparently it's disconnecting and reconnecting the emulated
keyboard and mouse:
Nov 2 13:39:11 microserver /bsd: wskbd0: disconnecting from wsdisplay0
Nov 2 13:39:11 microserver /bsd: wskbd0 detached
Nov 2 13:39:11 microserver /bsd: ukbd0 detached
Nov 2 13:39:11 microserver /bsd: uhidev0 detached
Nov 2 13:39:11 microserver /bsd: wsmouse0 detached
Nov 2 13:39:11 microserver /bsd: ums0 detached
Nov 2 13:39:11 microserver /bsd: uhidev1 detached
Nov 2 13:39:11 microserver /bsd: wsmouse1 detached
Nov 2 13:39:11 microserver /bsd: ums1 detached
Nov 2 13:39:11 microserver /bsd: uhidev2 detached
Nov 2 13:39:19 microserver /bsd: uhidev0 at uhub1
Nov 2 13:39:19 microserver /bsd: port 2 configuration 1 interface 0
"Avocent USB Composite Device-0" rev 2.00/0.00 addr 2
Nov 2 13:39:19 microserver /bsd: uhidev0: iclass 3/1
Nov 2 13:39:19 microserver /bsd: ukbd0 at uhidev0: 8 variable keys, 6 key
codes
Nov 2 13:39:19 microserver /bsd: wskbd0 at ukbd0 mux 1
Nov 2 13:39:19 microserver /bsd: wskbd0: connecting to wsdisplay0
Nov 2 13:39:19 microserver /bsd: uhidev1 at uhub1
Nov 2 13:39:19 microserver /bsd: port 2 configuration 1 interface 1
"Avocent USB Composite Device-0" rev 2.00/0.00 addr 2
Nov 2 13:39:19 microserver /bsd: uhidev1: iclass 3/1
Nov 2 13:39:19 microserver /bsd: ums0 at uhidev1: 3 buttons, Z dir
Nov 2 13:39:19 microserver /bsd: wsmouse0 at ums0 mux 0
Nov 2 13:39:19 microserver /bsd: uhidev2 at uhub1
Nov 2 13:39:19 microserver /bsd: port 2 configuration 1 interface 2
"Avocent USB Composite Device-0" rev 2.00/0.00 addr 2
Nov 2 13:39:19 microserver /bsd: uhidev2: iclass 3/1
Nov 2 13:39:19 microserver /bsd: ums1 at uhidev2: 3 buttons, Z dir
Nov 2 13:39:19 microserver /bsd: wsmouse1 at ums1 mux 0
The system is currently running 5.3/amd64; I plan to upgrade to 5.4 in the
next week or so. Full dmesg is included below. Any ideas on how I can
start troubleshooting this? Thanks for any suggestions.
full dmesg:
OpenBSD 5.3 (GENERIC.MP) #62: Tue Mar 12 18:21:20 MDT 2013
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4293459968 (4094MB)
avail mem = 4156674048 (3964MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfb330 (35 entries)
bios0: vendor HP version "O41" date 04/02/2011
bios0: HP ProLiant MicroServerr
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC MCFG SPMI OEMB HPET EINJ BERT ERST HEST SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4)
PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) PE20(S4)
PE21(S4) PE22(S4) PE23(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II Neo N36L Dual-Core Processor, 1298.10 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II Neo N36L Dual-Core Processor, 1297.85 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,3DNOWP,OSVW,IBS,SKINIT,NODEID,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpi0: unable to load \\_SB_._INI.EXH1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus -1 (PCE2)
acpiprt3 at acpi0: bus 1 (PCE4)
acpiprt4 at acpi0: bus 3 (PCE6)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: 1298 MHz: speeds: 1300 1100 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD RS880 Host" rev 0x00
ppb0 at pci0 dev 4 function 0 "AMD RS780 PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "ASPEED Technology", unknown product
0x1150 rev 0x02
pci2 at ppb1 bus 2
vga1 at pci2 dev 0 function 0 "ASPEED Technology AST2000" rev 0x10
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 6 function 0 "AMD RS780 PCIE" rev 0x00
pci3 at ppb2 bus 3
bge0 at pci3 dev 0 function 0 "Broadcom BCM5723" rev 0x10, BCM5784 A1
(0x5784100): apic 2 int 18, address d8:d3:85:af:a1:2e
brgphy0 at bge0 phy 1: BCM5784 10/100/1000baseT PHY, rev. 4
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: apic 2 int 19,
AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, VB0160EAVEQ, HPG0> SCSI3 0/direct
fixed naa.5000c5002746edab
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
sd1 at scsibus0 targ 2 lun 0: <ATA, ST2000DL003-9VT1, CC32> SCSI3 0/direct
fixed naa.5000c5002fea393b
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd2 at scsibus0 targ 3 lun 0: <ATA, ST2000DL003-9VT1, CC32> SCSI3 0/direct
fixed naa.5000c5002fe54906
sd2: 1907729MB, 512 bytes/sector, 3907029168 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x41: polling
iic0 at piixpm0
sdtemp0 at iic0 addr 0x18: se97
sdtemp1 at iic0 addr 0x19: se97
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM ECC PC3-10600 with thermal sensor
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GH24NS95, RN01> ATAPI
5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci4 at ppb3 bus 4
ohci2 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "ATI EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
kbc: cmd word write error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Avocent USB Composite
Device-0" rev 2.00/0.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Avocent USB Composite
Device-0" rev 2.00/0.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 2 configuration 1 interface 2 "Avocent USB Composite
Device-0" rev 2.00/0.00 addr 2
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
ugen0 at uhub3 port 5 "APC Back-UPS ES 450 FW:844.K2 .D USB FW:K2" rev
1.10/1.06 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd3 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed
sd3: 1907726MB, 512 bytes/sector, 3907023473 sectors
root on sd0a (179f09586523f116.a) swap on sd0b dump on sd0b
--
Joe Gidi
j...@entropicblur.com
"You cannot buy skill." -- Ross Seyfried
