Stephan A. Rickauer wrote:
Hello,
Stephan A. Rickauer wrote:
ugen0 at uhub4 port 1
ugen0: ASIX Electronics AX88178, rev 2.00/0.01, addr 2
I guess I _was_ unlucky. It's a Level one usb-0200.
Seems I was to quick. axe(4) should be the right one ... I'll try.
I am stuck now. All I could find out was that I have this device
connected at hub4, which theoretically is supported by the axe driver:
Since the LevelOne thing is not supported (yet) I thought I give it
another try, went to the next electronics store and picked the first
usb2ether device I could find. Plugging it in it says:
axe0 at uhub4 port 1 configuration 1 interface 0
axe0: Linksys USB 2.0 10/100 ethernet controller, rev 2.00/0.01, addr
2, address 00:10:60:85:4a:d4
Strike. For those coming from Switzerland/Germany - it's the Linksys
USB200M-DE from "Media Markt" ...
--
Stephan A. Rickauer
----------------------------
Institut f|r Neuroinformatik
Universitdt / ETH Z|rich
Winterthurerstriasse 190
CH-8057 Z|rich
Tel: +41 44 635 30 50
Sek: +41 44 635 30 52
Fax: +41 44 635 30 53
http://www.ini.ethz.ch
----------------------------
