On 11/12/13, Stijn <[email protected]> wrote: > On 11/11/2013 22:22, patrick keshishian wrote: >> Greetings, >> >> Saw this semi-related post[1], posting separately not to hijack it. >> >> Searching marc.info for "cellular modem" on misc@ archives >> finds mostly old, and posts about using mobile phones as >> cellular modems. >> >> Are there standalone cellular modem devices known to work >> with OpenBSD? >> >> Multi-Tech's QuickCarrier USB-D[2] caught my attention. >> >> --patrick >> >> [1] http://marc.info/?l=openbsd-misc&m=138419004519701&w=2 >> [2] http://www.multitech.com/en_US/PRODUCTS/Families/QuickCarrierUSBD/ >> > Not OpenBSD per se, but I've been using the following Huawei device (via > wifi) with great success: > http://consumer.huawei.com/en/portable-internet/mobile-wifi/tech-specs/e5220-en.htm
Thanks. That device is essentially what I'm looking for. A local WiFi to "cellular" network router. MultiTech also has similar, more industrial grade, cellular routers for local LAN (ethernet). This was a great reference, helping me get to: http://consumer.huawei.com/en/solutions/m2m-solutions/overview/index.htm Cheers, --patrick > Basically it sets up a wireless hotspot so as long as your device has a > wireless NIC you can have 3G connectivity. > > FYI, I just tried to see if USB tethering is working on this device but > with no luck. Looks like the device ID is unknown(?) Anyway, dmesg and > the "usbdevs -dv" output are available below. I also disconnected and > reconnected the device so you can see what it spits out on the console. > > HTH, > Stijn > > --- dmesg > OpenBSD 5.4 (GENERIC) #37: Tue Jul 30 12:05:01 MDT 2013 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) > 901 MHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,PERF > real mem = 1064366080 (1015MB) > avail mem = 1035530240 (987MB) > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 09/11/08, BIOS32 rev. 0 @ 0xf0010, > SMBIOS rev. 2.5 @ 0xf06f0 (37 entries) > bios0: vendor American Megatrends Inc. version "0906" date 09/11/2008 > bios0: ASUSTeK Computer INC. 900 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC OEMB MCFG > acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) > MC97(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: apic clock running at 100MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 5 (P0P3) > acpiprt2 at acpi0: bus 3 (P0P5) > acpiprt3 at acpi0: bus 1 (P0P6) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3, C2 > acpitz0 at acpi0: critical temperature is 90 degC > acpibat0 at acpi0: BAT0 model "900" serial type LION oem "ASUS" > acpiac0 at acpi0: AC unit online > acpiasus0 at acpi0 > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibtn2 at acpi0: PWRB > bios0: ROM list: 0xc0000/0xf800! > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04 > vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > inteldrm0: 1024x600 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured > azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC662 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16 > pci1 at ppb0 bus 4 > ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17 > pci2 at ppb1 bus 3 > lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1 > int 17, address 00:22:15:22:f5:9e > atphy0 at lii0 phy 1: F2 10/100 PHY, rev. 2 > ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18 > pci3 at ppb2 bus 1 > uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4 > pci4 at ppb3 bus 5 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM > disabled > pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, > channel 0 wired to compatibility, channel 1 wired to compatibility > wd0 at pciide0 channel 1 drive 0: <ASUS-PHISON OB SSD> > wd0: 1-sector PIO, LBA, 3847MB, 7880544 sectors > wd1 at pciide0 channel 1 drive 1: <ASUS-PHISON SSD> > wd1: 1-sector PIO, LBA, 7695MB, 15761088 sectors > wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4 > wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 4 > ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 > int 19 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-3200CL5 SO-DIMM > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > pms0: Elantech Touchpad, version 2 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > mtrr: Pentium Pro MTRR support > urndis0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > urndis0: using Vendorurndis0: STALLED > urndis0: init failed > urndis0: STALLED > urndis0: query failed > : unable to get hardware address > urndis1 at uhub0 port 2 configuration 1 interface 2 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > urndis1: using Vendorurndis1: STALLED > urndis1: init failed > urndis1: STALLED > urndis1: query failed > : unable to get hardware address > umass0 at uhub0 port 2 configuration 1 interface 4 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > umass0: using SCSI over Bulk-Only > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 0/direct > removable > umass1 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev > 2.00/1.00 addr 3 > umass1: using SCSI over Bulk-Only > scsibus1 at umass1: 2 targets, initiator 0 > sd1 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 > 0/direct removable serial.09511606146030377350 > uvideo0 at uhub0 port 8 configuration 1 interface 0 "Chicony Electronics > Co., Ltd. CNF7129" rev 2.00/15.12 addr 4 > video0 at uvideo0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on wd0a (b94a69d3a66e6350.a) swap on wd0b dump on wd0b > > --- disconnect of the device > urndis0 detached > urndis1 detached > sd0 detached > scsibus0 detached > umass0 detached > > --- reconnect of the device > umsm0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI HUAWEI Mobile" > rev 2.00/1.02 addr 2 > umsm0 detached > urndis0 at uhub0 port 2 configuration 1 interface 0 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > urndis0: using Vendorurndis0: STALLED > urndis0: init failed > urndis0: STALLED > urndis0: query failed > : unable to get hardware address > urndis1 at uhub0 port 2 configuration 1 interface 2 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > urndis1: using Vendorurndis1: STALLED > urndis1: init failed > urndis1: STALLED > urndis1: query failed > : unable to get hardware address > umass0 at uhub0 port 2 configuration 1 interface 4 "HUAWEI HUAWEI > Mobile" rev 2.00/1.02 addr 2 > umass0: using SCSI over Bulk-Only > scsibus0 at umass0: 2 targets, initiator 0 > sd0 at scsibus0 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2 0/direct > removable > > --- "usbdevs -dv" > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub0 > port 1 powered > port 2 addr 2: high speed, power 500 mA, config 1, HUAWEI > Mobile(0x1c1e), HUAWEI(0x12d1), rev 1.02 > urndis0 > urndis1 > umass0 > port 3 powered > port 4 powered > port 5 addr 3: high speed, power 498 mA, config 1, UB6225(0x1606), > ENE(0x0951), rev 1.00, iSerialNumber 146030377350 > umass1 > port 6 powered > port 7 powered > port 8 addr 4: high speed, power 500 mA, config 1, CNF7129(0xb071), > Chicony Electronics Co., Ltd.(0x04f2), rev 15.12, iSerialNumber SN0001 > uvideo0 > Controller /dev/usb1: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub1 > port 1 powered > port 2 powered > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub2 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub3 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > uhub4 > port 1 powered > port 2 powered
