On 11/16/13 13:03, SmithS wrote:
Greetings misc@. After coming across a link[1] to make an OpenBSD
router using a "Soekris" device, I think I will make one. Does anyone
else have this hardware and can verify all the components work?
I think Intel NICs are good, but everything else? I have never heard
of this brand before so I want to be safe before buying. The model
number[2] is "6501-30"
[1] http://www.bsdnow.tv/tutorials/openbsd-router
[2] https://soekris.com/products/net6501/net6501-30-board-case.html
greetz,
SmithS
I've got a rack-mounted net6501-50 working well at the moment,
but I've only been using it for a few weeks so far.
Not sure "all" the components work, but it was easy to install
OpenBSD 5.3 to a USB stick, boot off that, then install to an SSD.
You have to connect with a serial cable, I've found a cheap USB->serial
adapter
connected to a null modem cable to work well.
Any issues I've had - Google has given the answers. 8-)
Also got a 5501 in use and that's been working well, too.
dmesg from the 6501:
$ dmesg
OpenBSD 5.3 (GENERIC) #0: Wed Aug 28 19:46:41 NZST 2013
r...@abc.def.co.nz:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Genuine Intel(R) CPU @ 1.00GHz ("GenuineIntel" 686-class) 1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 1073131520 (1023MB)
avail mem = 1044611072 (996MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/21/15, BIOS32 rev. 0 @ 0xfac40
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 100MHz
cpu at mainbus0: not configured
mpbios0: bus 0 is type PCI
mpbios0: bus 64 is type ISA
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3880/96 (4 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x8186
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #13 is the last bus
bios0: ROM list: 0xc8000/0x2400 0xca800/0x4c00 0xcf800/0xee00
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06090a0a06000a0d
cpu0: using only highest, current and lowest power states
cpu0: Enhanced SpeedStep 1001 MHz: speeds: 1000, 1000, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E600 Host" rev 0x05
pchb1 at pci0 dev 1 function 0 "Intel E600 Config" rev 0x00
ppb0 at pci0 dev 23 function 0 "Intel E600 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel EG20T PCIE" rev 0x01
pci2 at ppb1 bus 2
"Intel EG20T Packet Hub" rev 0x01 at pci2 dev 0 function 0 not configured
"Intel EG20T Ethernet" rev 0x02 at pci2 dev 0 function 1 not configured
"Intel EG20T GPIO" rev 0x01 at pci2 dev 0 function 2 not configured
ohci0 at pci2 dev 2 function 0 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ohci1 at pci2 dev 2 function 1 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ohci2 at pci2 dev 2 function 2 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ehci0 at pci2 dev 2 function 3 "Intel EG20T USB" rev 0x02: apic 0 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T USB Client" rev 0x02 at pci2 dev 2 function 4 not configured
sdhc0 at pci2 dev 4 function 0 "Intel EG20T SDIO" rev 0x01: apic 0 int 18
sdmmc0 at sdhc0
sdhc1 at pci2 dev 4 function 1 "Intel EG20T SDIO" rev 0x01: apic 0 int 18
sdmmc1 at sdhc1
ahci0 at pci2 dev 6 function 0 "Intel EG20T AHCI" rev 0x02: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, INTEL SSDMAEXC02, 9CV1> SCSI3
0/direct fixed naa.5001517803d66c24
sd0: 19087MB, 512 bytes/sector, 39091248 sectors, thin
ohci3 at pci2 dev 8 function 0 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ohci4 at pci2 dev 8 function 1 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ohci5 at pci2 dev 8 function 2 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ehci1 at pci2 dev 8 function 3 "Intel EG20T USB" rev 0x02: apic 0 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T DMA" rev 0x00 at pci2 dev 10 function 0 not configured
puc0 at pci2 dev 10 function 1 "Intel EG20T Serial" rev 0x01: ports: 1 com
com3 at puc0 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc1 at pci2 dev 10 function 2 "Intel EG20T Serial" rev 0x00: ports: 1 com
com4 at puc1 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc2 at pci2 dev 10 function 3 "Intel EG20T Serial" rev 0x00: ports: 1 com
com5 at puc2 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc3 at pci2 dev 10 function 4 "Intel EG20T Serial" rev 0x00: ports: 1 com
com6 at puc3 port 0 apic 0 int 19: ti16750, 64 byte fifo
"Intel EG20T DMA" rev 0x00 at pci2 dev 12 function 0 not configured
"Intel EG20T SPI" rev 0x00 at pci2 dev 12 function 1 not configured
"Intel EG20T I2C" rev 0x00 at pci2 dev 12 function 2 not configured
"Intel EG20T CAN" rev 0x00 at pci2 dev 12 function 3 not configured
"Intel EG20T 1588" rev 0x01 at pci2 dev 12 function 4 not configured
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb7 at ohci5: USB revision 1.0
uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
ppb2 at pci0 dev 24 function 0 "Intel E600 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:00:24:d0:24:0c
ppb5 at pci4 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:00:24:d0:24:0d
ppb6 at pci4 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci7 at ppb6 bus 7
ppb7 at pci0 dev 25 function 0 "Intel E600 PCIE" rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci10 at ppb9 bus 10
em2 at pci10 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00:
msi, address 00:00:24:d0:24:0e
ppb10 at pci9 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci11 at ppb10 bus 11
em3 at pci11 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00:
msi, address 00:00:24:d0:24:0f
ppb11 at pci9 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci12 at ppb11 bus 12
ppb12 at pci0 dev 26 function 0 "Intel E600 PCIE" rev 0x00
pci13 at ppb12 bus 13
tcpcib0 at pci0 dev 31 function 0 "Intel E600 LPC" rev 0x00: 14318179 Hz
timer, watchdog
isa0 at tcpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (40a71e1c20bdb67b.a) swap on sd0b dump on sd0b
