On Mon, Dec 9, 2013 at 1:38 AM, Marios Makassikis <[email protected]> wrote:
> Is PF enabled ? If so, perhaps your current rules are IPv4 only.
> Can you ping6 from this host ?
pf is disable.
# ndp -a
Neighbor Linklayer Address Netif Expire S Flags
2001:d30:101:624::64 0:16:3e:65:2b:b vio1 permanent R
fe80::216:3eff:fe1b:ac9c%vio0 0:16:3e:1b:ac:9c vio0 permanent R
fe80::216:3eff:fe65:2b0b%vio1 0:16:3e:65:2b:b vio1 permanent R
fe80::21b:2aff:fee2:a4c0%vio1 (incomplete) vio1 expired N
fe80::1%lo0 (incomplete) lo0 permanent R
#
# route -n show -inet6 |grep vio1
default fe80::21b:2aff:fee2:a4c0%vio1 UGS
0 0 - 8 vio1
2001:d30:101:624::/64 link#2 UC
1 0 - 4 vio1
2001:d30:101:624::1 00:1b:2a:e2:a4:c0 UHLc
0 4 - 4 vio1
fe80::%vio1/64 link#2 UC
1 0 - 4 vio1
fe80::216:3eff:fe65:2b0b%vio1 00:16:3e:65:2b:0b UHL
0 0 - 4 lo0
fe80::21b:2aff:fee2:a4c0%vio1 00:1b:2a:e2:a4:c0 UHLc
1 9 - 4 vio1
ff01::%vio1/32 link#2 UC
0 0 - 4 vio1
ff02::%vio1/32 link#2 UC
1 0 - 4 vio1
ff02::1:ffe2:a4c0%vio1 link#2 UHLc
0 0 - 4 vio1
ping6 to gateway's link local is fine.
# ping6 fe80::21b:2aff:fee2:a4c0%vio1
PING6(56=40+8+8 bytes) fe80::216:3eff:fe65:2b0b%vio1 -->
fe80::21b:2aff:fee2:a4c0%vio1
16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=0 hlim=64 time=1.811 ms
16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=1 hlim=64 time=0.912 ms
16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=2 hlim=64 time=0.948 ms
16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=3 hlim=64 time=0.883 ms
16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=4 hlim=64 time=0.938 ms
^C
--- fe80::21b:2aff:fee2:a4c0%vio1 ping6 statistics ---
5 packets transmitted, 5 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 0.883/1.098/1.811/0.357 ms
# ping6 2001:D30:101:624::1
PING6(56=40+8+8 bytes) 2001:d30:101:624::64 --> 2001:d30:101:624::1
^C
--- 2001:D30:101:624::1 ping6 statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
