On Wed, Dec 11, 2013 at 2:33 AM, Stuart Henderson <[email protected]> wrote: > There were problems with af-to in some recent versions, but since you > didn't include the dmesg, I can't say if this applies to you.. > http://www.openbsd.org/report.html
i use openbsd 5.4 ------- OpenBSD 5.4 (GENERIC) #37: Tue Jul 30 15:24:05 MDT 2013 [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 520081408 (495MB) avail mem = 498601984 (475MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x1ffffef0 (10 entries) bios0: vendor Bochs version "Bochs" date 01/01/2007 bios0: Bochs Bochs acpi0 at bios0: rev 0 acpi0: sleep states S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC HPET acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat acpihpet0 at acpi0: 100000000 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 mpbios0 at bios0: Intel MP Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor) cpu0: QEMU Virtual CPU version 0.14.1, 2328.07 MHz cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,LONG,LAHF cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped cpu0: smt 0, core 0, package 0 cpu0: apic clock running at 1000MHz mpbios0: bus 0 is type PCI mpbios0: bus 1 is type ISA ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK> wd0: 16-sector PIO, LBA48, 30720MB, 62914560 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.14> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 11 piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 1 int 9 iic0 at piixpm0 --------------------- > BTW you're probably better off using BIND 9 from ports which has > built-in DNS64 support, rather than totd. BIND config is something > like this (in the options section) :- > dns64 2xxx:xxx:xxxx:6464::/96 { clients { any; }; }; i'll consider dns64 under bind in the future. -- -dikshie-
