Hi,
This is my first experience with installing on one of these
boards. I got today's i386 snapshot (Jan 11, 2014) and installed
successfully on a CF card.
After placing the CF in the unit, it seems to boot up fine
after setting:
boot> stty com0 38400
boot> set tty com0
However, it stops right before displaying the login prompt:
switching console to com0
>> OpenBSD/i386 BOOT 3.25
boot>
loadrandom: hd0a:/etc/random.seed
booting hd0a:/bsd: 9276028+1082796 [72+404624+398274]=0xaa5260
entry point at 0x200120
[ using 803384 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org
[... full output at eom]
starting network daemons: sshd sendmail sndiod.
starting local daemons: cron.
Sat Jan 11 20:12:23 PST 2014
it just sits there. Sending it BREAK does nothing.
Any ideas what I may be doing incorrectly?
--patrick
PC Engines ALIX.2 v0.99h
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 848A ULTIMATE CF CARD
Phys C/H/S 16383/16/63 Log C/H/S 1892/255/63 LBA
Using drive 0, partition 3.
Loading.....
probing: pc0 com0 com1 pci mem[640K 255M a20=on]
disk: hd0+
>> OpenBSD/i386 BOOT 3.25
boot>
loadrandom: hd0a:/etc/random.seed
booting hd0a:/bsd: 9276028+1082796 [72+404624+398274]=0xaa5260
entry point at 0x200120
PC Engines ALIX.2 v0.99h
640 KB Base Memory
31744PC Engines ALIX.2 v0.99h
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 848A ULTIMATE CF CARD
Phys C/H/S 16383/16/63 Log C/H/S 1892/255/63 LBA
Using drive 0, partition 3.
Loading.....
probing: pc0 com0 com1 pci mem[640K 255M a20=on]
disk: hd0+
>> OpenBSD/i386 BOOT 3.25
boot> stty com0 38400
boot> set tty com0
switching console to com0
>> OpenBSD/i386 BOOT 3.25
boot>
loadrandom: hd0a:/etc/random.seed
booting hd0a:/bsd: 9276028+1082796 [72+404624+398274]=0xaa5260
entry point at 0x200120
[ using 803384 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.4-current (GENERIC) #224: Sat Jan 11 00:32:57 MST 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 499 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem = 267943936 (255MB)
avail mem = 251678720 (240MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/05/08, BIOS32 rev. 0 @ 0xfd088
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10,
address 00:0d:b9:2f:89:e4
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:0d:b9:2f:89:e5
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 15,
address 00:0d:b9:2f:89:e6
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3,
32-bit 3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
maxtmp0 at iic0 addr 0x4c: lm86
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ULTIMATE CF CARD>
wd0: 1-sector PIO, LBA48, 14847MB, 30408336 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12,
version 1.0, legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (530c32759ec43d2d.a) swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
clock: unknown CMOS layout
Automatic boot in progress: starting file system checks.
/dev/rwd0a: 2004 files, 23066 used, 152524 free (44 frags, 19060
blocks, 0.0% fragmentation)
/dev/rwd0a: MARKING FILE SYSTEM CLEAN
/dev/rwd0g: 17 files, 291 used, 514132 free (20 frags, 64264 blocks,
0.0% fragmentation)
/dev/rwd0g: MARKING FILE SYSTEM CLEAN
/dev/rwd0d: 5 files, 4 used, 514531 free (35 frags, 64312 blocks, 0.0%
fragmentation)
/dev/rwd0d: MARKING FILE SYSTEM CLEAN
/dev/rwd0f: 22762 files, 267407 used, 2311336 free (2080 frags, 288657
blocks, 0.1% fragmentation)
/dev/rwd0f: MARKING FILE SYSTEM CLEAN
/dev/rwd0e: 424 files, 2317 used, 512106 free (26 frags, 64010 blocks,
0.0% fragmentation)
/dev/rwd0e: MARKING FILE SYSTEM CLEAN
setting tty flags
wsconsctl: /dev/wskbd0: Device not configured
pf enabled
starting network
starting early daemons: syslogd pflogd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd sendmail sndiod.
starting local daemons: cron.
Sat Jan 11 20:12:23 PST 2014
