On 03/08/14 08:51, Chris Bennett wrote:
> As of this update, I have had these two portions of the screen move off
> of visible area.
"this update" ... from what?
I'm going to assume from a pre-radeondrm version.
>
> +------------------------+
> | | |
> | | |
> | | text console |
> | | |
> | | |
> | | |
> | | |
> | | |
> +-|----------------------+
> +------------------------+
>
> Everything else is working fine.
>
> Chris Bennett
Radeon DRM...looks like a desktop, so I'm guessing you have a VGA
connected LCD monitor.
note the amount of guessing I'm doing here.
radeondrm runs the video in a graphics mode it didn't used to run in, so
you will probably have to re-adjust your monitor. Fill the screen
("top" might do it sufficiently), and hit the "auto adjust" button,
tweek if needed with the manual adjustments.
Nick.
> OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014
> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 6156910592 (5871MB)
> avail mem = 5984403456 (5707MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0x9f400 (30 entries)
> bios0: vendor American Megatrends Inc. version "P01-B1" date 03/06/2010
> bios0: Gateway DX4300
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG SLIC OEMB HPET AWMI SSDT
> acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4)
> PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) UAR1(S3) UAR2(S3) PS2K(S3)
> PS2M(S3) P0PC(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD Athlon(tm) 7750 Dual-Core Processor, 2700.52 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,ITSC
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache, 2MB 64b/line 32-way L3 cache
> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu0: AMD erratum 721 detected and fixed
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 200MHz
> cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD Athlon(tm) 7750 Dual-Core Processor, 2700.17 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,ITSC
> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache, 2MB 64b/line 32-way L3 cache
> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu1: AMD erratum 721 detected and fixed
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (P0P1)
> acpiprt2 at acpi0: bus -1 (PCE2)
> acpiprt3 at acpi0: bus -1 (PCE3)
> acpiprt4 at acpi0: bus 2 (PCE5)
> acpiprt5 at acpi0: bus -1 (PCE6)
> acpiprt6 at acpi0: bus 3 (P0PC)
> acpicpu0 at acpi0: PSS
> acpicpu1 at acpi0: PSS
> acpitz0 at acpi0: critical temperature is 105 degC
> acpibtn0 at acpi0: PWRB
> cpu0: 2700 MHz: speeds: 2700 1400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD RS780 Host" rev 0x00
> ppb0 at pci0 dev 1 function 0 "AMD RS780 PCIE" rev 0x00
> pci1 at ppb0 bus 1
> radeondrm0 at pci1 dev 5 function 0 "ATI Radeon HD 3200" rev 0x00
> drm0 at radeondrm0
> radeondrm0: apic 2 int 18
> azalia0 at pci1 dev 5 function 1 "ATI RS780 HD Audio" rev 0x00: msi
> azalia0: no supported codecs
> ppb1 at pci0 dev 5 function 0 "AMD RS780 PCIE" rev 0x00: msi
> pci2 at ppb1 bus 2
> mskc0 at pci2 dev 0 function 0 "Marvell Yukon 88E8071" rev 0x16, Yukon-2
> Extreme rev. B0 (0x2): apic 2 int 17
> msk0 at mskc0 port A: address 00:22:68:67:ee:9c
> eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 22,
> AHCI 1.1
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, Maxtor 6Y080M0, YAR5> SCSI3 0/direct
> fixed t10.ATA_Maxtor_6Y080M0_Y2B4ERCE_
> sd0: 76293MB, 512 bytes/sector, 156250000 sectors
> cd0 at scsibus0 targ 1 lun 0: <ATAPI, DVD A DH16A6S, YA17> ATAPI 5/cdrom
> removable
> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16,
> version 1.0, legacy support
> ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16,
> version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
> version 1.0, legacy support
> ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18,
> version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3a: SMI
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5
> spdmem1 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5
> spdmem2 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
> pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0
> configured to compatibility, channel 1 configured to compatibility
> wd0 at pciide0 channel 1 drive 0: <WDC WD2500JB-00REA0>
> wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
> wd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 16
> azalia1: codecs: Realtek ALC888
> audio0 at azalia1
> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
> ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
> pci3 at ppb2 bus 3
> unknown vendor 0x199f product 0x8521 (class multimedia subclass
> miscellaneous, rev 0x01) at pci3 dev 5 function 0 not configured
> ral0 at pci3 dev 6 function 0 "Ralink RT2561S" rev 0x00: apic 2 int 21,
> address 00:0c:0a:49:9c:98
> ral0: MAC/BBP RT2561C, RF RT2527
> ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
> version 1.0, legacy support
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
> usb2 at ohci0: USB revision 1.0
> uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb3 at ohci1: USB revision 1.0
> uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb4 at ohci2: USB revision 1.0
> uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb5 at ohci3: USB revision 1.0
> uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> it0 at isa0 port 0x2e/2: IT8718F rev 5, EC port 0xe80
> usb6 at ohci4: USB revision 1.0
> uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> umass0 at uhub1 port 3 configuration 1 interface 0 "IOI IOI Smart Reader" rev
> 2.00/1.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct
> removable
> sd2 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct
> removable
> sd3 at scsibus1 targ 1 lun 2: <Generic, USB xD/SM Reader, 1.02> SCSI0
> 0/direct removable
> sd4 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct
> removable
> sd5 at scsibus1 targ 1 lun 4: <Generic, Mini SD Reader, 1.06> SCSI0 0/direct
> removable
> uhidev0 at uhub1 port 3 configuration 1 interface 1 "IOI IOI Smart Reader"
> rev 2.00/1.00 addr 2
> uhidev0: iclass 3/0, 5 report ids
> uhid0 at uhidev0 reportid 4: input=7, output=0, feature=0
> uhid1 at uhidev0 reportid 5: input=0, output=1, feature=0
> uhidev1 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2
> Optical Mouse" rev 2.00/18.00 addr 2uhidev1: iclass 3/1
> ums0 at uhidev1: 6 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhidev2 at uhub4 port 1 configuration 1 interface 0 "CHICONY USB Keyboard"
> rev 1.10/1.03 addr 2
> uhidev2: iclass 3/1
> ukbd0 at uhidev2: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev3 at uhub4 port 1 configuration 1 interface 1 "CHICONY USB Keyboard"
> rev 1.10/1.03 addr 2
> uhidev3: iclass 3/1
> ums1 at uhidev3: 3 buttons, Z dir
> wsmouse1 at ums1 mux 0
> uhidev4 at uhub4 port 2 configuration 1 interface 0 "Microsoft Natural" rev
> 2.00/2.07 addr 3
> uhidev4: iclass 3/1
> ukbd1 at uhidev4: 8 variable keys, 6 key codes
> wskbd2 at ukbd1 mux 1
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on wd0a (0594143967cd3f4c.a) swap on wd0b dump on wd0b
> drm: initializing kernel modesetting (RS780 0x1002:0x9610 0x1025:0x0155).
> radeondrm0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
> radeondrm0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
> drm: PCIE GART of 512M enabled (table at 0x00000000C0040000).
> radeondrm0: 1920x1080
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wskbd2: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
