Glad to see it's working for you too ;) Thanks to Stuart for the debugging session and Theo !
Best regards, Alexis VACHETTE. _____ From: Zé Loff [mailto:[email protected]] To: [email protected] Sent: Sun, 06 Apr 2014 00:31:53 +0100 Subject: Re: APU firmware On Sat, Apr 05, 2014 at 08:14:22AM +0000, Stuart Henderson wrote: > On 2014-04-04, Zé Loff <[email protected]> wrote: > > On Thu, Apr 03, 2014 at 07:22:52AM -0600, [email protected] wrote: > >> For those of you with PC-Engines APU systems, a BIOS which works a lot > >> better can be found about halfway down http://pcengines.ch/apu1c.htm > >> > >> Good luck. I hope they have it on newly shipped boards.. > >> > > > > After an unbelievable ordeal to flash the new BIOS, OpenBSD's installer > > (5.4-release and -current, amd64) still fails at the same spot: hangs > > right after the 'entry point' line (unable to detect storage devices?). > > > > > > That sounds like you forgot to 'set tty com0' in the boot loader. > *facepalm* Well, this is embarrassing... I did an install onto a USB stick on my laptop and then used the stick to boot the APU, so I _think_ the installer didn't ask me about changing the default console to com0 and it slipped my mind. It's been a long time since I did a clean install on a headless machine, I've been happily upgrading them for a while now... Sorry for the noise and thanks for the cluebat ***************************************************************************** ********************************************* Ce message et toutes les pieces jointes sont confidentiels et etablis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisee est interdite. Tout message electronique est susceptible d'alteration. SISTEER decline toute responsabilite au titre de ce message s'il a ete altere, deforme ou falsifie. Si vous n'etes pas le destinataire de ce message, merci de le detruire et d'informer l'expediteur. ***************************************************************************** ********************************************* This message and any attachments are confidential and intended solely for the addressee(s). Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. SISTEER shall not be liable for the message if altered, changed or falsified. If you are not the intended addressee of this message, please cancel it immediately and inform the sender. ***************************************************************************** *********************************************
