On 06/10/2014 12:01 AM, Jonathan Gray wrote:
On Mon, Jun 09, 2014 at 04:53:23AM -0500, Stan Gammons wrote:
On 06/09/2014 01:56 AM, Jonathan Gray wrote:
On Sun, Jun 08, 2014 at 07:01:56AM -0500, Stan Gammons wrote:
Is there a known problem with the Radeon driver on OpenBSD 5.5 AMD64
stable? I noticed the text on the console was scrolling very slow
while src.tar.gz was extracting. I didn't time it, but it seem to take
2 to 3 times as long to return to the command line compared to
extracting the same file on a slower i386 machine. Syslog output is
below.
Well things are going to be slow when all the acceleration is being
disabled. It isn't clear if the problem you're encountering is
due to something like missing firmware as you didn't include a dmesg.
It loads or tries to load firmware at boot.
Here's the dmesg info.
So it seems something isn't working right with the GART.
Could you try the following diff to force it to a smaller size?
Diff against -current but will likely apply to 5.5
Index: sys/dev/pci/drm/radeon/rs400.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/drm/radeon/rs400.c,v
retrieving revision 1.4
diff -u -p -r1.4 rs400.c
--- sys/dev/pci/drm/radeon/rs400.c 9 Feb 2014 12:33:44 -0000 1.4
+++ sys/dev/pci/drm/radeon/rs400.c 10 Jun 2014 04:57:21 -0000
@@ -54,6 +54,8 @@ void rs400_gart_adjust_size(struct radeo
rdev->mc.gtt_size = 32 * 1024 * 1024;
return;
}
+ DRM_ERROR("Forcing to 32M GART size\n");
+ rdev->mc.gtt_size = 32 * 1024 * 1024;
}
void rs400_gart_tlb_flush(struct radeon_device *rdev)
It didn't seem to like that.
OpenBSD 5.5 (GENERIC.MP) #1: Tue Jun 10 16:24:29 CDT 2014
r...@gateway.home.net:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4141809664 (3949MB)
avail mem = 4022943744 (3836MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf0100 (52 entries)
bios0: vendor Award Software International, Inc. version "FK" date
08/31/2010
bios0: Gigabyte Technology Co., Ltd. GA-MA74GM-S2
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT HPET MCFG APIC
acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) SBAZ(S4) P2P_(S5) PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4)
PCE6(S4) PCE7(S4) PCE8(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II X2 250 Processor, 3021.29 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 201MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD Athlon(tm) II X2 250 Processor, 3020.91 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P2P_)
acpiprt2 at acpi0: bus 2 (PCE2)
acpiprt3 at acpi0: bus -1 (PCE3)
acpiprt4 at acpi0: bus -1 (PCE4)
acpiprt5 at acpi0: bus -1 (PCE5)
acpiprt6 at acpi0: bus -1 (PCE6)
acpiprt7 at acpi0: bus -1 (PCE7)
acpiprt8 at acpi0: bus -1 (PCE8)
acpiprt9 at acpi0: bus 1 (AGP_)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: PWRB
cpu0: 3021 MHz: speeds: 3000 2300 1800 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI RS740 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon 2100" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 18
ppb1 at pci0 dev 2 function 0 "ATI RS690M PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel 82571EB" rev 0x06: apic 2 int 18,
address 00:15:17:cd:db:42
em1 at pci2 dev 0 function 1 "Intel 82571EB" rev 0x06: apic 2 int 19,
address 00:15:17:cd:db:43
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int
22, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Maxtor 7Y250M0, YAR5> SCSI3 0/direct
fixed t10.ATA_Maxtor_7Y250M0_Y64Y10TE_
sd0: 239372MB, 512 bytes/sector, 490234752 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, Maxtor 6Y250M0, YAR5> SCSI3 0/direct
fixed t10.ATA_Maxtor_6Y250M0_Y64DMDWE_
sd1: 239371MB, 512 bytes/sector, 490232639 sectors
cd0 at scsibus0 targ 2 lun 0: <HL-DT-ST, DVDRAM GH24NS95, RN01> ATAPI
5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 16,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x52: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x53: 2GB DDR2 SDRAM non-parity PC2-6400CL5
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8718F rev 8, EC port 0x228
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "ATI OHCI root hub" rev 1.00/1.00 addr 1
uhub7 at uhub2 port 3 "Dell Dell USB Keyboard Hub" rev 1.10/48.01 addr 2
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Dell Dell USB
Keyboard Hub" rev 1.10/48.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Dell Dell USB
Keyboard Hub" rev 1.10/48.00 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
ugen0 at uhub3 port 1 "American Power Conversion Smart-UPS 1500
FW:601.3.D USB FW:1.5" rev 1.10/0.06 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (e3bbf385dfc43d70.a) swap on sd0b dump on sd0b
drm: initializing kernel modesetting (RS740 0x1002:0x796E 0x1458:0xD000).
error: [drm:pid0:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size
radeondrm0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
radeondrm0: GTT: 32M 0x00000000CE000000 - 0x00000000CFFFFFFF
drm: PCIE GART of 32M enabled (table at 0x0000000008922000).
error: [drm:pid0:r100_ring_test] *ERROR* radeon: ring test failed
(scratch(0x15E4)=0xCAFEDEAD)
error: [drm:pid0:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
error: [drm:pid0:rs690_startup] *ERROR* failed initializing CP (-22).
error: [drm:pid0:rs690_init] *ERROR* Disabling GPU acceleration
error: [drm:pid0:r100_cp_fini] *ERROR* Wait for CP idle timeout,
shutting down CP.
error: [drm:pid0:r100_gui_wait_for_idle] *ERROR* radeon: wait for empty
RBBM fifo failed ! Bad things might happen.
error: [drm:pid0:r100_cp_disable] *ERROR* Failed to wait GUI idle while
programming pipes. Bad things might happen.
drm: radeon: cp finalized
radeondrm0: 1600x900
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
