Hello,
I've recently got my hands on a sun fire x2200 m2, and run openbsd on
it.
Everything is good except when I try to connect to wifi by the way of
different USB adapters (2 urtwn and 1 run).
Every time I up the interface, after 5 to 10 seconds, the machine
freezes without anything printed on the console, then reboot.
I've tried 5.5 release and -current, same thing happens.
I've tested the wifi adapters on my -current laptop, and they all work
fine.
Wired network functions correctly.
Has that already happened to someone ?
Can it be a glitch with sun firmware/bios/whatever ?
Regards,
Mike
OpenBSD 5.5-current (GENERIC.MP) #215: Tue Jun 17 10:35:36 MDT 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8573091840 (8175MB)
avail mem = 8336101376 (7949MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xfd350 (52 entries)
bios0: vendor Sun Microsystems version "S39_3B10" date 10/26/2006
bios0: Sun Microsystems Sun Fire X2200 M2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC SPCR OEMB SRAT
acpi0: wakeup devices PS2K(S4) PS2M(S4) NSMB(S4) USB0(S1) USB2(S1)
NMAC(S5) NMAD(S5) P0P1(S4) HDAC(S4) BR10(S5) BR11(S5) BR12(S5)
BR1E(S5) BCM1(S5) BR13(S5) BR14(S5) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2210, 1809.52 MHz
cpu0:
E3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 201MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 2210, 1809.28 MHz
cpu1:
E3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Dual-Core AMD Opteron(tm) Processor 2210, 1809.28 MHz
cpu2:
E3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Dual-Core AMD Opteron(tm) Processor 2210, 1809.28 MHz
cpu3:
E3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully
associative
cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully
associative
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 11, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 7 (BR10)
acpiprt3 at acpi0: bus -1 (BR11)
acpiprt4 at acpi0: bus 5 (BR12)
acpiprt5 at acpi0: bus 6 (BR1E)
acpiprt6 at acpi0: bus 4 (BR13)
acpiprt7 at acpi0: bus 3 (BR14)
acpiprt8 at acpi0: bus 2 (BR15)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpicpu2 at acpi0: PSS
acpicpu3 at acpi0: PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: PowerNow! K8 1809 MHz: speeds: 1800 1000 MHz
pci0 at mainbus0 bus 0
"NVIDIA MCP55 Memory" rev 0xa2 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA MCP55 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA MCP55 SMBus" rev 0xa3
iic0 at nviic0
spdmem0 at iic0 addr 0x54: 1GB DDR2 SDRAM registered cmd/addr parity,
data ECC PC2-5300CL5
spdmem1 at iic0 addr 0x55: 1GB DDR2 SDRAM registered cmd/addr parity,
data ECC PC2-5300CL5
spdmem2 at iic0 addr 0x56: 1GB DDR2 SDRAM registered cmd/addr parity,
data ECC PC2-5300CL5
spdmem3 at iic0 addr 0x57: 1GB DDR2 SDRAM registered cmd/addr parity,
data ECC PC2-5300CL5
iic1 at nviic0
spdmem4 at iic1 addr 0x54: 1GB DDR2 SDRAM registered cmd/addr parity,
data ECC PC2-5300CL5
spdmem5 at iic1 addr 0x55: 1GB DDR2 SDRAM registered cmd/addr parity,
data ECC PC2-5300CL5
spdmem6 at iic1 addr 0x56: 1GB DDR2 SDRAM registered cmd/addr parity,
data ECC PC2-5300CL5
spdmem7 at iic1 addr 0x57: 1GB DDR2 SDRAM registered cmd/addr parity,
data ECC PC2-5300CL5
ohci0 at pci0 dev 2 function 0 "NVIDIA MCP55 USB" rev 0xa1: apic 4 int
15, version 1.0, legacy support
ehci0 at pci0 dev 2 function 1 "NVIDIA MCP55 USB" rev 0xa2: apic 4 int
7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NVIDIA EHCI root hub" rev 2.00/1.00 addr 1
pciide0 at pci0 dev 4 function 0 "NVIDIA MCP55 IDE" rev 0xa1: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 5 function 0 "NVIDIA MCP55 SATA" rev 0xa3: DMA
pciide1: using apic 4 int 10 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HITACHI HDS7250SASUN500G 0627K7HSTF>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
wd1 at pciide1 channel 1 drive 0: <HITACHI HDS7250SASUN500G 0627K7YSRF>
wd1: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
ppb0 at pci0 dev 6 function 0 "NVIDIA MCP55" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ASPEED Technology AST2000" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
nfe0 at pci0 dev 8 function 0 "NVIDIA MCP55 LAN" rev 0xa3: apic 4 int
11, address 00:16:36:76:4a:5b
eephy0 at nfe0 phy 2: 88E1149 Gigabit PHY, rev. 1
nfe1 at pci0 dev 9 function 0 "NVIDIA MCP55 LAN" rev 0xa3: apic 4 int
5, address 00:16:36:76:4a:5c
eephy1 at nfe1 phy 3: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 10 function 0 "NVIDIA MCP55 PCIE" rev 0xa3
pci2 at ppb1 bus 2
ppb2 at pci0 dev 11 function 0 "NVIDIA MCP55 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 12 function 0 "NVIDIA MCP55 PCIE" rev 0xa3
pci4 at ppb3 bus 4
ppb4 at pci0 dev 13 function 0 "NVIDIA MCP55 PCIE" rev 0xa3
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci6 at ppb5 bus 6
bge0 at pci6 dev 4 function 0 "Broadcom BCM5715" rev 0xa3, BCM5715 A3
(0x9003): apic 4 int 15, address 00:16:36:76:4a:59
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci6 dev 4 function 1 "Broadcom BCM5715" rev 0xa3, BCM5715 A3
(0x9003): apic 4 int 10, address 00:16:36:76:4a:5a
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb6 at pci0 dev 15 function 0 "NVIDIA MCP55 PCIE" rev 0xa3
pci7 at ppb6 bus 7
pchb0 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00:
core rev JH-F2
pchb3 at pci0 dev 25 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb4 at pci0 dev 25 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb5 at pci0 dev 25 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate1 at pci0 dev 25 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00:
core rev JH-F2
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x68
wbsio0 port 0xa10/2 not configured
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "NVIDIA OHCI root hub" rev 1.00/1.00 addr 1
urtwn0 at uhub0 port 5 "Realtek NETGEAR WNA3100M" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R, address c4:04:15:6e:e4:8e
run0 at uhub0 port 8 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 3
run0: MAC/BBP RT2872 (rev 0x0202), RF RT2820 (MIMO 2T2R), address
00:22:b0:e0:28:6e
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Virtual USB
MULTIMEDIA KEYBOARD" rev 1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Virtual USB
MULTIMEDIA KEYBOARD" rev 1.10/0.01 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 9 configuration 1 interface 0 "Logitech USB
Keyboard" rev 1.10/64.00 addr 3
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub1 port 9 configuration 1 interface 1 "Logitech USB
Keyboard" rev 1.10/64.00 addr 3
uhidev3: iclass 3/0, 3 report ids
uhid0 at uhidev3 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev3 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev3 reportid 3: input=3, output=0, feature=0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
softraid0: sd0 was not shutdown properly
sd0 at scsibus2 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct
fixed
sd0: 474853MB, 512 bytes/sector, 972499472 sectors
root on sd0a (41869be0f32dcfe1.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
