When using this hostname.trunk0:
---
trunkproto failover trunkport alc0 trunkport athn0
-inet6
dhcp
---
If the master trunkport is active on initial state, either at boot or
upon resume from suspend, on occasion the athn0 NIC shows "no carrier".
Upon initiation of failover while in this state, it does not recover.
If the athn0 NIC is used as egress and not part of a trunk, it is always
"active" and never enters the same state.
A scan corrects the state, so this ifstated.conf has been implemented as
an attempted circumvention.
---
wifi_up = "athn0.link.up"
state only {
init {
if ! $wifi_up
run "ifconfig athn0 scan > /dev/null"
}
if ! $wifi_up
run "ifconfig athn0 scan > /dev/null"
}
---
Any recommendatons for better problem identifaction/isolation steps would be
appreciated.
---
trunk0: flags=28843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NOINET6> mtu 1500
lladdr 90:e6:ba:37:cf:5e
priority: 0
trunk: trunkproto failover
trunkport athn0
trunkport alc0 master,active
groups: trunk egress
media: Ethernet autoselect
status: active
inet 10.0.1.130 netmask 0xffffff00 broadcast 10.0.1.255
athn0: flags=28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,NOINET6> mtu
1500
lladdr 90:e6:ba:37:cf:5e
priority: 4
trunk: trunkdev trunk0
groups: wlan
media: IEEE802.11 autoselect (DS1 mode 11g)
status: active
ieee80211: nwid "nondescript black Escalade" chan 8 bssid
d8:5d:4c:bd:fb:08 49dB wpakey <not displayed> wpaprotos wpa1,wpa2 wpaakms psk
wpaciphers tkip,ccmp wpagroupcipher tkip
alc0:
flags=28b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST,NOINET6>
mtu 1500
lladdr 90:e6:ba:37:cf:5e
priority: 0
trunk: trunkdev trunk0
media: Ethernet autoselect (100baseTX full-duplex,rxpause,txpause)
status: active
OpenBSD 5.5-current (GENERIC.MP) #219: Sun Jun 29 19:09:31 MDT 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
real mem = 1064464384 (1015MB)
avail mem = 1034616832 (986MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 04/18/11, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf0720 (30 entries)
bios0: vendor American Megatrends Inc. version "1601" date 04/18/2011
bios0: ASUSTeK Computer INC. 1005HA
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB HPET SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) HDAC(S4) P0P4(S4) P0P8(S4) P0P5(S4)
P0P7(S4) P0P9(S4) P0P6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.0.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 2
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0P5)
acpiprt2 at acpi0: bus 1 (P0P7)
acpiprt3 at acpi0: bus -1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature is 88 degC
acpibat0 at acpi0: BAT0 model "1005HA" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xec00!
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1600, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x600
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 16
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 17
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17
athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:8a:f6:b4
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 2 int 19
pci3 at ppb2 bus 1
alc0 at pci3 dev 0 function 0 "Attansic Technology L2C" rev 0xc0: msi, address
90:e6:ba:37:cf:5e
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST9160314AS, 0002> SCSI3 0/direct fixed
naa.5000c50019076592
sd0: 152627MB, 512 bytes/sector, 312581808 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
uvideo0 at uhub0 port 2 configuration 1 interface 0 "GenesysLogic Technology
Co. III, Ltd. USB2.0 UVC 1.3M WebCam" rev 2.00/16.01 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (48b9941ca32383be.a) swap on sd0b dump on sd0b
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 32766MB, 512 bytes/sector, 67104912 sectors
