rc: no closing quote

pae3 Tue, 22 Jul 2014 03:10:26 -0700

On 07/22/2014 13:29, Stefan Wollny wrote:

Am 07/22/14 11:08, schrieb Stefan Wollny:

Am 07/21/14 22:04, schrieb Antoine Jacoutot:

On Mon, Jul 21, 2014 at 11:50:19PM +0400, pae3 wrote:

Hi.


After upgrade from iso file (21 july) local daemons from
/etc/rc.conf.local not started. During  boot process 1  odd
messages has been seen : "/etc/rc: no closing quote" ( on i386
& amd64).

Did you run sysmerge?

OpenBSD 5.6-beta (GENERIC) #236: Mon Jul 21 02:35:53 MDT 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC

cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60

GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE,LAHF,PERF

real mem  = 1600483328 (1526MB)

avail mem = 1561890816 (1489MB) mpath0 at root scsibus0 at
mpath0: 256 targets mainbus0 at root bios0 at mainbus0: AT/286+
BIOS, date 08/26/08, BIOS32 rev. 0 @ 0xfdc40, SMBIOS rev. 2.5 @
0xdf010 (24 entries) bios0: vendor LENOVO version "14CN34WW"
date 08/26/2008 bios0: LENOVO Lenovo acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC
HPET MCFG TCPA TMOR APIC BOOT ASF! SSDT SSDT SSDT acpi0: wakeup
devices HDEF(S4) PXS1(S4) PXS2(S4) PXS3(S4) USB1(S4) USB2(S4)
USB3(S4) USB4(S4) USB7(S4) acpitimer0 at acpi0: 3579545 Hz, 24
bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at
mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR
support, 8 var ranges, 88 fixed ranges cpu0: apic clock running
at 132MHz cpu at mainbus0: not configured ioapic0 at mainbus0:
apid 1 pa 0xfec00000, version 20, 24 pins ioapic0:
misconfigured as apic 2, remapped to apid 1 acpihpet0 at acpi0:
14318179 Hz acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 2
(RP01) acpiprt2 at acpi0: bus 3 (RP02) acpiprt3 at acpi0: bus 5
(RP03) acpiprt4 at acpi0: bus 6 (PCIB) acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS acpitz0 at acpi0: critical
temperature is 95 degC acpibtn0 at acpi0: PWRB acpibtn1 at
acpi0: SLPB acpiac0 at acpi0: AC unit online acpibat0 at acpi0:
BAT0 model "LE30_S" serial   type LION oem "Sanyo" acpibtn2 at
acpi0: LID_ acpivideo0 at acpi0: GFX0 bios0: ROM list:
0xc0000/0xec00! 0xcf000/0x1e00 0xdf000/0x800! 0xe0000/0x1800!
cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1067,
800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
intagp0 at vga1 agp0 at intagp0: aperture at 0xd0000000, size
0x10000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0:
1024x600 wsdisplay0 at vga1 mux 1: console (std, vt100
emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not
configured azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD
Audio" rev 0x02: msi azalia0: codecs: Realtek ALC269 audio0 at
azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev
0x02: apic 1 int 17 pci1 at ppb0 bus 2 bge0 at pci1 dev 0
function 0 "Broadcom BCM5906M" rev 0x02, BCM5906 A2 (0xc002):
msi, address 00:1e:68:ae:1a:f0 brgphy0 at bge0 phy 1: BCM5906
10/100baseTX PHY, rev. 0 ppb1 at pci0 dev 28 function 1 "Intel
82801GB PCIE" rev 0x02: apic 1 int 16 pci2 at ppb1 bus 3 ppb2
at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1
int 18 pci3 at ppb2 bus 5 "Broadcom BCM4315" rev 0x01 at pci3
dev 0 function 0 not configured uhci0 at pci0 dev 29 function 0
"Intel 82801GB USB" rev 0x02: apic 1 int 23 uhci1 at pci0 dev
29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19 uhci2
at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1
int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev
0x02: apic 1 int 16 ehci0 at pci0 dev 29 function 7 "Intel
82801GB USB" rev 0x02: apic 1 int 23 usb0 at ehci0: USB
revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00
addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BAM
Hub-to-PCI" rev 0xe2 pci4 at ppb3 bus 6 ichpcib0 at pci0 dev 31
function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled pciide0
at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility pciide0: channel 0 disabled (no drives) pciide0:
channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2
"Intel 82801GBM SATA" rev 0x02: DMA, channel 0 configured to
native-PCI, channel 1 configured to native-PCI pciide1: using
apic 1 int 19 for native-PCI interrupt wd0 at pciide1 channel 0
drive 0: <TOSHIBA MK5059GSX> wd0: 16-sector PIO, LBA48,
476940MB, 976773168 sectors wd0(pciide1:0:0): using PIO mode 4,
Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 "Intel
82801GB SMBus" rev 0x02: apic 1 int 19 iic0 at ichiic0 iic0:
addr 0x4a 00=29 01=00 02=4b 03=50 04=50 05=50 06=50 07=50 08=50
09=50 0a=50 0b=50 0c=50 0d=50 0e=50 0f=50 22=4b 40=29 41=00
42=4b 43=50 44=50 45=50 46=50 47=50 48=29 49=50 4a=29 4b=50
4c=50 4d=50 4e=29 4f=50 ee=50 words 00=4e80 01=3000 02=4b00
03=5000 04=5000 05=5000 06=5000 07=5000 spdmem0 at iic0 addr
0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM usb1 at
uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev
1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2
"Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB
revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00
addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel
UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at
isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console
keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0:
using irq 12 for aux slot wsmouse0 at pms0 mux 0 pms0:
Synaptics touchpad, firmware 7.2 pcppi0 at isa0 port 0x61 spkr0
at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using
exception 16 axe0 at uhub0 port 1 configuration 1 interface 0
"D-Link DUB-E100 rev C1" rev 2.00/0.01 addr 2 axe0: AX88772B,
address bc:f6:85:d7:40:dc ukphy0 at axe0 phy 16: Generic IEEE
802.3u media interface, rev. 1: OUI 0x000ec6, model 0x0008 rum0
at uhub0 port 2 "Ralink 802.11 bg WLAN" rev 2.00/0.01 addr 3
rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address
00:18:f3:3a:24:3e uvideo0 at uhub0 port 3 configuration 1
interface 0 "BISON Corporation Lenovo EasyCamera" rev
2.00/14.10 addr 4 video0 at uvideo0 umass0 at uhub0 port 5
configuration 1 interface 0 "Generic USB2.0-CRW" rev 2.00/58.87
addr 5 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2
targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Generic-,
Multi-Card, 1.00> SCSI0 0/direct removable
serial.0bda0158114173400000 umass1 at uhub0 port 7
configuration 1 interface 0 "A-DATA A-DATA USB Flash Drive" rev
2.00/1.00 addr 6 umass1: using SCSI over Bulk-Only scsibus2 at
umass1: 2 targets, initiator 0 sd1 at scsibus2 targ 1 lun 0:
<A-DATA, USB Flash Drive, 0.00> SCSI2 0/direct removable
serial.125fe74ad1e38572d34a sd1: 15487MB, 512 bytes/sector,
31719423 sectors vscsi0 at root scsibus3 at vscsi0: 256
targets softraid0 at root scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2
0/direct fixed sd2: 51199MB, 512 bytes/sector, 104857072
sectors root device (default wd0a): sd2a swap device (default
sd2b): root on sd2a swap on sd2b dump on sd2b ehci_idone:
ex=0xd7e7d3f4 is done! ehci_idone: ex=0xd7e7d3f4 is done!

Hi!

I run the very latest i386-current: $ dmesg | grep OpenBSD OpenBSD
5.6-beta (GENERIC.MP) #262: Mon Jul 21 20:03:20 MDT 2014

I can confirm that the message reported by Alex is still there:
The message "/etc/rc: no closing quote" comes after "starting
network". And YES: I did run sysmerge, actually twice. After
downloading the tgz-files I did a "sysmerge -s etc56.tgz -x
xetc56.tgz". After rebooing I did an update of /etc/src and run
sysmerge again.

@Antoine: I attach a screenshot of the boot message which
hopefully will not be filtered by 'bsdfrog.org'.

If I can do any tests let me know.

Cheers, STEFAN

[demime 1.01d removed an attachment of type image/jpeg which had a
name of IMG_20140722_102104.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a
name of IMG_20140722_102238.jpg]

Looking at /etc/netstart (v 1.141 2014/07/12 14:39:31) I find one line
around line 282 where I see an opening single back tick but no
matching closing back tick:

        maddr=`if [ "$multicast_host" = "YES" ]; then
                ed -s '!route -qn show -inet' <<EOF

(I am no programmer - so if this looks OK to you please be patient
with me )

All the best,
STEFAN

Hi!
Sorry for thread but i run sysmerge and now it's OK (on i386 @amd64)
Thanx for LibreSSL!

Best regards,
Alex

Re: /etc/rc: no closing quote

Reply via email to