Am 30.08.2014 um 13:46 schrieb Axel Rau <axel....@chaos1.de>: > Am 29.08.2014 um 08:11 schrieb Jonathan Gray <j...@jsg.id.au>: > >> Initial support for the i347 phy was added back in March but that wasn't >> part of 5.5. I suspect you want something along the lines of the >> following patch: > Yes, this patch worked (does at least initialization of em2-em5, > more testing to follow). Next problem shows up with sppp over vlan from MAC 00:60:e0:5a:75:45: - - - - 13:49:38.170666 00:60:e0:5a:75:39 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100) , length 60: vlan 7, p 3, ethertype PPPoE D, PPPoE PADI [Service-Name] [Host-Uniq 0x95F818D3] 13:49:38.313082 00:30:88:1f:18:9a > 00:60:e0:5a:75:39, ethertype 802.1Q (0x8100) , length 87: vlan 7, p 6, ethertype PPPoE D, PPPoE PADO [Host-Uniq 0x95F818D3] [AC-Name "FFMR71-se800-B2224180702381"] [AC-Cookie "..lvg}..Bv.>.;8."] [Service-Name] 13:49:38.313093 00:60:e0:5a:75:39 > 00:30:75:39:00:30, ethertype 802.1Q (0x8100) , length 60: vlan 7, p 3, ethertype PPPoE D, PPPoE PADR [Service-Name] [AC-Cookie "..lvg}..Bv.>.;8."] [Host-Uniq 0x95F818D3] 13:49:43.310779 00:60:e0:5a:75:39 > 00:30:75:39:00:30, ethertype 802.1Q (0x8100) , length 60: vlan 7, p 3, ethertype PPPoE D, PPPoE PADR [Service-Name] [AC-Cookie "..lvg}..Bv.>.;8."] [Host-Uniq 0x95F818D3] 13:49:53.311256 00:60:e0:5a:75:39 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100) , length 60: vlan 7, p 3, ethertype PPPoE D, PPPoE PADI [Service-Name] [Host-Uniq 0x95F818D3] 13:49:53.339482 00:30:88:1f:18:9a > 00:60:e0:5a:75:39, ethertype 802.1Q (0x8100) , length 87: vlan 7, p 6, ethertype PPPoE D, PPPoE PADO [Host-Uniq 0x95F818D3] [AC-Name "FFMR71-se800-B2224180702381"] [AC-Cookie "..lvg}..Bv.>.;8."] [Service-Name] 13:49:53.339492 00:60:e0:5a:75:39 > 00:30:75:39:00:30, ethertype 802.1Q (0x8100) , length 60: vlan 7, p 3, ethertype PPPoE D, PPPoE PADR [Service-Name] [AC-Cookie "..lvg}..Bv.>.;8."] [Host-Uniq 0x95F818D3] 13:50:01.214264 00:60:e0:5a:75:39 > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100) , length 60: vlan 7, p 3, ethertype PPPoE D, PPPoE PADI [Service-Name] [Host-Uniq 0x95F818D3] - - - The i347 device (em5) has a hardware-MAC of 00:60:e0:5a:75:45, but shows up above as 00:60:e0:5a:75:39. The answer to the pppoe server with MAC address 00:30:88:1f:18:9a is being sent to MAC 00:30:75:39:00:30 instead.
Do I need more patches (perhaps VLAN related) for the i347 ? Any help welcome, Axel --- PGP-Key:29E99DD6 ☀ +49 151 2300 9283 ☀ computing @ chaos claudius