Hi,
I thought [during the last stage of switching to -current] the
Makefile's $PKG_PATH variable in /usr/ports had to be set the same
as it is in ~/.profile. ie. PKG_PATH=ftp://mirror.aarnet.edu.au/pub
/OpenBSD/5.5/packages/$(uname -m). But that gives me "Broken dependency"
error. Without doing that, most of "make update" output gives me these
errors:
Your X11/system is not current (in archivers/ha)
Your X11/system is not current (in archivers/ha)
===> archivers/hs-zlib
Your X11/system is not current (in archivers/hs-zlib)
Your X11/system is not current (in archivers/hs-zlib)
Your X11/system is not current (in archivers/hs-zlib)
Your X11/system is not current (in archivers/hs-zlib)
Your X11/system is not current (in archivers/hs-zlib)
===> Looking for hs-zlib-0.5.4.1.tgz in $PKG_PATH - not found
*** Error 1 in archivers/hs-zlib
(/usr/ports/infrastructure/mk/bsd.port.mk:1949
'/usr/ports/packages/amd64/cache//hs-zlib-0.5.4.1.tgz': @if ...)
Your X11/system is not current (in archivers/hs-zlib)
Your X11/system is not current (in archivers/hs-zlib)
Your X11/system is not current (in archivers/hs-zlib)
===> Checking files for hs-zlib-0.5.4.1
Your X11/system is not current (in archivers/hs-zlib)
`/usr/ports/distfiles/ghc/zlib-0.5.4.1.tar.gz' is up to date.
>> (SHA256) ghc/zlib-0.5.4.1.tar.gz: OK
Your X11/system is not current (in lang/ghc)
===> hs-zlib-0.5.4.1 depends on: ghc-* - not found
===> Verifying install for ghc-* in lang/ghc
Your X11/system is not current (in lang/ghc)
Your X11/system is not current (in lang/ghc)
Your X11/system is not current (in lang/ghc)
Your X11/system is not current (in lang/ghc)
Your X11/system is not current (in lang/ghc)
===> Installing ghc-7.6.3p1 from /usr/ports/packages/amd64/all/
Fatal error: Ustar
[file:/usr/ports/packages/amd64/all/ghc-7.6.3p1.tgz][lib/ghc/base-4.6.0.1/libHSbase-4.6.0.1_p.a]:
Premature end of archive
Adjusting sha for /usr/local/lib/ghc/base-4.6.0.1/pkg.lNlmObbqeY from
cmqTx/budUZwHU4e0oQJQYLCtDezN8C6rVUjLNlxnAc= to
18h5bSUiTB9gtLk6zh2x7FZzBt7ZQpZekoSXmTui8bg=
Fatal error: Installation of ghc-7.6.3p1 failed, partial installation
recorded as partial-ghc-7.6.3p1.6
at /usr/libdata/perl5/OpenBSD/PkgAdd.pm line 821.
*** Error 22 in lang/ghc (/usr/ports/infrastructure/mk/bsd.port.mk:1980
'/var/db/pkg/ghc-7.6.3p1/+CONTENTS': @if /usr/sbin/pkg_info -e ghc-7...)
*** Error 1 in lang/ghc (/usr/ports/infrastructure/mk/bsd.port.mk:2492
'install')
*** Error 1 in archivers/hs-zlib
(/usr/ports/infrastructure/mk/bsd.port.mk:2119
'/usr/ports/pobj/hs-zlib-0.5.4.1/.dep-lang-ghc')
*** Error 1 in archivers/hs-zlib
(/usr/ports/infrastructure/mk/bsd.port.mk:2575
'/usr/ports/pobj/hs-zlib-0.5.4.1/.extract_done')
*** Error 1 in archivers/hs-zlib
(/usr/ports/infrastructure/mk/bsd.port.mk:1959
'/usr/ports/packages/amd64/all/hs-zlib-0.5.4.1.tgz')
*** Error 1 in archivers/hs-zlib
(/usr/ports/infrastructure/mk/bsd.port.mk:1957
'/usr/ports/packages/amd64/all/hs-zlib-0.5.4.1.tgz')
*** Error 1 in archivers/hs-zlib
(/usr/ports/infrastructure/mk/bsd.port.mk:2512 '_internal-package') ***
Error 1 in archivers/hs-zlib
(/usr/ports/infrastructure/mk/bsd.port.mk:1985
'/usr/ports/update/amd64/hs-zlib-0.5.4.1')
*** Error 1 in archivers/hs-zlib
(/usr/ports/infrastructure/mk/bsd.port.mk:2492 'update')
===> Exiting archivers/hs-zlib with an error
*** Error 1 in archivers
(/usr/ports/infrastructure/mk/bsd.port.subdir.mk:147 'update')
===> Exiting archivers with an error
*** Error 1 in /usr/ports (infrastructure/mk/bsd.port.subdir.mk:147 'update')
(Sorry for not revealing all of it, I'm typing this email on lynx webmail
as I can't get packages or ports to work.)
Here is /var/log/messages:
Sep 16 19:00:01 frog newsyslog[5450]: logfile turned over
Sep 16 19:00:01 frog syslogd: restart
Sep 16 19:03:04 frog pkg_add: Added unzip-6.0p4
Sep 16 19:03:05 frog pkg_add: Added iso8879-1986p0
Sep 16 19:03:10 frog pkg_add: Added docbook-dsssl-1.79
Sep 16 19:12:45 frog pkg_add: Added metaauto-1.0p1
Sep 16 19:13:26 frog pkg_add: Added gmake-4.0p0
Sep 16 19:13:27 frog pkg_add: Added help2man-1.41.1p0
Sep 16 19:13:28 frog pkg_add: Added autoconf-2.69p1
Sep 16 19:14:44 frog pkg_add: Added groff-1.22.2p4
Sep 16 19:15:37 frog pkg_add: Added autoconf-2.68p0
Sep 16 19:15:52 frog pkg_add: Added automake-1.14.1
Sep 16 19:16:36 frog pkg_add: Added autoconf-2.67p0
Sep 16 19:16:37 frog pkg_add: Added libltdl-2.4.2p0
Sep 16 19:16:38 frog pkg_add: Added libtool-2.4.2p0
Sep 16 19:17:03 frog pkg_add: Added libffi-3.0.13
Sep 16 19:17:55 frog pkg_add: Added gdbm-1.11
Sep 16 19:19:15 frog pkg_add: Added tcl-8.5.15p2
Sep 16 19:19:18 frog pkg_add: Added tk-8.5.15p1
Sep 16 19:21:05 frog pkg_add: Added db-4.6.21p0v0
Sep 16 19:26:37 frog pkg_add: Added python-2.7.8
Sep 16 19:30:06 frog pkg_add: Added libxml-2.9.1p1
Sep 16 19:30:08 frog pkg_add: Added docbook-4.5p1
Sep 16 19:33:21 frog pkg_add: Added libgpg-error-1.13p0
Sep 16 19:35:09 frog pkg_add: Added libgcrypt-1.6.2
Sep 16 19:35:11 frog pkg_add: Added py-libxml-2.9.1p1
Sep 16 19:35:13 frog pkg_add: Added libxslt-1.1.28p0
Sep 16 19:35:19 frog pkg_add: Added docbook-xsl-1.68.1p5
Attached is /var/run/dmesg.boot
I did try to get the output of /usr/ports/infrastructure/bin/portslogger
as read in the FAQ but nothing happened.
My system is running OpenBSD 5.6 -current on amd64 using a GENERIC.MP
kernel.
Regards,
Vic
OpenBSD 5.5 (RAMDISK_CD) #237: Wed Mar 5 09:43:42 MST 2014
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error
f7<clock_battery,ROM_cksum,config_unit,memory_size,invalid_time>
real mem = 4173856768 (3980MB)
avail mem = 4057788416 (3869MB)
User Kernel Config
UKC> dia\^H \^Hsable acpi
198 acpi0 disabled
UKC> quit
Continuing...
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xb9ec3000 (22 entries)
bios0: vendor Hewlett-Packard version "68PVI Ver. F.09" date 01/07/2011
bios0: Hewlett-Packard Compaq 620
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Celeron(R) Dual-Core CPU T3300 @ 2.00GHz, 1995.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 1MB 64b/line 4-way L2 cache
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: irq 10
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: irq 11
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: irq 10
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: irq 10
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: irq 11
pci2 at ppb1 bus 2
ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: irq 11, address
e0:2a:82:5e:c3:ab
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: irq 10
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: irq 10
pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: irq 11
pci5 at ppb4 bus 133
re0 at pci5 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), irq
11, address 78:e3:b5:4c:69:02
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: irq 10
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: irq 10
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: irq 10
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: irq 10
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
"Intel 82801IBM LPC" rev 0x03 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: irq 10, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54502, PB2O> SCSI3 0/direct
fixed naa.5000cca5fac4fc35
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT30L, mP06> ATAPI 5/cdrom removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
"Foxlink HP Webcam [2 MP Fixed]" rev 2.00/1.06 addr 2 at uhub0 port 5 not
configured
"vendor 0x148f product 0x1000" rev 2.00/52.76 addr 2 at uhub3 port 1 not
configured
softraid0 at root
scsibus1 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting...
OpenBSD 5.5 (GENERIC) #271: Wed Mar 5 09:31:16 MST 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC
RTC BIOS diagnostic error
f7<clock_battery,ROM_cksum,config_unit,memory_size,invalid_time>
real mem = 4173856768 (3980MB)
avail mem = 4054179840 (3866MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xb9ec3000 (22 entries)
bios0: vendor Hewlett-Packard version "68PVI Ver. F.09" date 01/07/2011
bios0: Hewlett-Packard Compaq 620
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SLIC SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3)
U6RM(S3) EHC1(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Celeron(R) Dual-Core CPU T3300 @ 2.00GHz, 1995.34 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 1MB 64b/line 4-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (RP05)
acpiprt5 at acpi0: bus 133 (RP06)
acpiprt6 at acpi0: bus 134 (PCIB)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: COMP, resource for COM1
acpipwrres2 at acpi0: LPP_, resource for LPT0
acpipwrres3 at acpi0: PFN6, resource for FAN6
acpipwrres4 at acpi0: PFN7, resource for FAN7
acpipwrres5 at acpi0: PFN8, resource for FAN8
acpipwrres6 at acpi0: PFN9, resource for FAN9
acpipwrres7 at acpi0: PFNA, resource for FANA
acpipwrres8 at acpi0: PFNB, resource for FANB
acpipwrres9 at acpi0: PGF0, resource for FANG
acpitz0 at acpi0: critical temperature is 108 degC
acpipwrres10 at acpi0: PFN0, resource for FAN0
acpipwrres11 at acpi0: PFN1, resource for FAN1
acpipwrres12 at acpi0: PFN2, resource for FAN2
acpipwrres13 at acpi0: PFN3, resource for FAN3
acpipwrres14 at acpi0: PFN4, resource for FAN4
acpipwrres15 at acpi0: PFN5, resource for FAN5
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 108 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 108 degC
acpitz5 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 29416 2011/02/18 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: IDT/0x7666, Intel/0x2802, using IDT/0x7666
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 2
ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 1 int 17, address
e0:2a:82:5e:c3:ab
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 133
re0 at pci5 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi,
address 78:e3:b5:4c:69:02
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS54502, PB2O> SCSI3 0/direct
fixed naa.5000cca5fac4fc35
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus0 targ 1 lun 0: <hp, DVDRAM GT30L, mP06> ATAPI 5/cdrom removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Foxlink HP Webcam [2 MP
Fixed]" rev 2.00/1.06 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "Ralink Technology product 0x1000" rev 2.00/52.76 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (c78c247aa3580953.a) swap on sd0b dump on sd0b
syncing disks... done
rebooting...
OpenBSD 5.6-current (GENERIC.MP) #0: Tue Sep 16 15:50:23 EST 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error
f7<clock_battery,ROM_cksum,config_unit,memory_size,invalid_time>
real mem = 4173856768 (3980MB)
avail mem = 4054249472 (3866MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xb9ec3000 (22 entries)
bios0: vendor Hewlett-Packard version "68PVI Ver. F.09" date 01/07/2011
bios0: Hewlett-Packard Compaq 620
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SLIC SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3)
U6RM(S3) EHC1(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Celeron(R) Dual-Core CPU T3300 @ 2.00GHz, 1995.36 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 1MB 64b/line 4-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Celeron(R) Dual-Core CPU T3300 @ 2.00GHz, 1995.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG,LAHF,PERF
cpu1: 1MB 64b/line 4-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (RP05)
acpiprt5 at acpi0: bus 133 (RP06)
acpiprt6 at acpi0: bus 134 (PCIB)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1
acpicpu1 at acpi0: C2, C1
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: COMP, resource for COM1
acpipwrres2 at acpi0: LPP_, resource for LPT0
acpipwrres3 at acpi0: PFN6, resource for FAN6
acpipwrres4 at acpi0: PFN7, resource for FAN7
acpipwrres5 at acpi0: PFN8, resource for FAN8
acpipwrres6 at acpi0: PFN9, resource for FAN9
acpipwrres7 at acpi0: PFNA, resource for FANA
acpipwrres8 at acpi0: PFNB, resource for FANB
acpipwrres9 at acpi0: PGF0, resource for FANG
acpitz0 at acpi0: critical temperature is 108 degC
acpipwrres10 at acpi0: PFN0, resource for FAN0
acpipwrres11 at acpi0: PFN1, resource for FAN1
acpipwrres12 at acpi0: PFN2, resource for FAN2
acpipwrres13 at acpi0: PFN3, resource for FAN3
acpipwrres14 at acpi0: PFN4, resource for FAN4
acpipwrres15 at acpi0: PFN5, resource for FAN5
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 108 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 108 degC
acpitz5 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 29416 2011/02/18 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: IDT/0x7666, Intel/0x2802, using IDT/0x7666
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 2
ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 1 int 17, address
e0:2a:82:5e:c3:ab
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 133
re0 at pci5 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi,
address 78:e3:b5:4c:69:02
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54502, PB2O> SCSI3 0/direct
fixed naa.5000cca5fac4fc35
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus1 targ 1 lun 0: <hp, DVDRAM GT30L, mP06> ATAPI 5/cdrom removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Foxlink HP Webcam [2 MP
Fixed]" rev 2.00/1.06 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "Ralink Technology product 0x1000" rev 2.00/52.76 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (c78c247aa3580953.a) swap on sd0b dump on sd0b
arp: attempt to overwrite permanent entry for 10.0.10.50 by c0:3f:0e:41:95:df
on ral0
syncing disks... done
rebooting...
OpenBSD 5.6-current (GENERIC.MP) #0: Tue Sep 16 15:50:23 EST 2014
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error
f7<clock_battery,ROM_cksum,config_unit,memory_size,invalid_time>
real mem = 4173856768 (3980MB)
avail mem = 4054249472 (3866MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xb9ec3000 (22 entries)
bios0: vendor Hewlett-Packard version "68PVI Ver. F.09" date 01/07/2011
bios0: Hewlett-Packard Compaq 620
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SSDT SLIC SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5)
RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3)
U6RM(S3) EHC1(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Celeron(R) Dual-Core CPU T3300 @ 2.00GHz, 1995.28 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG,LAHF,PERF
cpu0: 1MB 64b/line 4-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Celeron(R) Dual-Core CPU T3300 @ 2.00GHz, 1995.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE,NXE,LONG,LAHF,PERF
cpu1: 1MB 64b/line 4-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus -1 (PEGP)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (RP03)
acpiprt4 at acpi0: bus 68 (RP05)
acpiprt5 at acpi0: bus 133 (RP06)
acpiprt6 at acpi0: bus 134 (PCIB)
acpiprt7 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1
acpicpu1 at acpi0: C2, C1
acpipwrres0 at acpi0: APPR, resource for HDEF
acpipwrres1 at acpi0: COMP, resource for COM1
acpipwrres2 at acpi0: LPP_, resource for LPT0
acpipwrres3 at acpi0: PFN6, resource for FAN6
acpipwrres4 at acpi0: PFN7, resource for FAN7
acpipwrres5 at acpi0: PFN8, resource for FAN8
acpipwrres6 at acpi0: PFN9, resource for FAN9
acpipwrres7 at acpi0: PFNA, resource for FANA
acpipwrres8 at acpi0: PFNB, resource for FANB
acpipwrres9 at acpi0: PGF0, resource for FANG
acpitz0 at acpi0: critical temperature is 108 degC
acpipwrres10 at acpi0: PFN0, resource for FAN0
acpipwrres11 at acpi0: PFN1, resource for FAN1
acpipwrres12 at acpi0: PFN2, resource for FAN2
acpipwrres13 at acpi0: PFN3, resource for FAN3
acpipwrres14 at acpi0: PFN4, resource for FAN4
acpipwrres15 at acpi0: PFN5, resource for FAN5
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 108 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 108 degC
acpitz5 at acpi0: critical temperature is 110 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 29416 2011/02/18 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivideo1 at acpi0: GFX0
acpivout0 at acpivideo1: DD02
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: IDT/0x7666, Intel/0x2802, using IDT/0x7666
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 2
ral0 at pci2 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 1 int 17, address
e0:2a:82:5e:c3:ab
ral0: MAC/BBP RT3090 (rev 0x3213), RF RT3020 (MIMO 1T1R)
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 68
ppb4 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 133
re0 at pci5 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL (0x2480), msi,
address 78:e3:b5:4c:69:02
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
pcib0 at pci0 dev 31 function 0 "Intel 82801IBM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Hitachi HTS54502, PB2O> SCSI3 0/direct
fixed naa.5000cca5fac4fc35
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
cd0 at scsibus1 targ 1 lun 0: <hp, DVDRAM GT30L, mP06> ATAPI 5/cdrom removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.4
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Foxlink HP Webcam [2 MP
Fixed]" rev 2.00/1.06 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "Ralink Technology product 0x1000" rev 2.00/52.76 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (c78c247aa3580953.a) swap on sd0b dump on sd0b
