On Thu, Sep 25, 2014 at 2:37 AM, Joel Sing <j...@sing.id.au> wrote: > On Wed, 24 Sep 2014, Dan Becker wrote: > > forgot to add this relevant part > > > > # bioctl -R /dev/wd0a sd1 > > softraid0: wd0a partition too small, at least 536871980544 bytes required > > # > > Again, note the "bytes" vs "blocks". That has most likely been fixed > already, > however without a dmesg I have no idea what kernel you're running with. My > guess is this is a softraid volume with pre-bootable metadata... >
I was hoping to see someone else having the same issue :) I will do some more digging but here is the dmesg I didnt attach OpenBSD 5.5 (GENERIC.MP) #315: Wed Mar 5 09:37:46 MST 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2120769536 (2022MB) avail mem = 2055761920 (1960MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (72 entries) bios0: vendor Dell Inc. version "A01" date 05/24/2005 bios0: Dell Inc. OptiPlex GX520 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET SSDT SSDT SSDT acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5) PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz, 3192.41 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 199MHz cpu0: mwait min=0, max=0 (bogus) cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Pentium(R) 4 CPU 3.20GHz, 3192.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,CNXT-ID,CX16,xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 8 acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 4 (PCI4) acpiprt1 at acpi0: bus 2 (PCI2) acpiprt2 at acpi0: bus 3 (PCI3) acpiprt3 at acpi0: bus 1 (PCI1) acpiprt4 at acpi0: bus -1 (PCI5) acpiprt5 at acpi0: bus -1 (PCI6) acpiprt6 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: FVS, 3200, 3000, 2800 MHz acpicpu1 at acpi0: FVS, 3200, 3000, 2800 MHz acpibtn0 at acpi0: VBTN pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 ppb0 at pci0 dev 1 function 0 "Intel 82945G PCIE" rev 0x02: msi pci1 at ppb0 bus 1 "Intel 82945G Video" rev 0x02 at pci0 dev 2 function 0 not configured "Intel 82945G Video" rev 0x02 at pci0 dev 2 function 1 not configured ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi pci2 at ppb1 bus 2 bge0 at pci2 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001): apic 8 int 16, address 00:12:3f:64:03:96 brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi pci3 at ppb2 bus 3 uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21 uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22 uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18 uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23 ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 pci4 at ppb3 bus 4 radeondrm0 at pci4 dev 0 function 0 "ATI Radeon 9200 PRO" rev 0x01 drm0 at radeondrm0 radeondrm0: apic 8 int 16 "ATI Radeon 9200 PRO Sec" rev 0x01 at pci4 dev 0 function 1 not configured "AT&T/Lucent FW322 1394" rev 0x70 at pci4 dev 2 function 0 not configured auich0 at pci0 dev 30 function 2 "Intel 82801GB AC97" rev 0x01: apic 8 int 23, ICH7 AC97 ac97: codec id 0x41445374 (Analog Devices AD1981B) ac97: codec features headphone, 20 bit DAC, No 3D Stereo audio0 at auich0 pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 1 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CD/DVDW TS-H652M, 0414> ATAPI 5/cdrom removable cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 8 int 20 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: <Hitachi HDS5C3020ALA632> wd0: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors wd1 at pciide1 channel 0 drive 1: <Hitachi HDS5C3020ALA632> wd1: 16-sector PIO, LBA48, 1907729MB, 3907029168 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 6 ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 umass0 at uhub0 port 7 configuration 1 interface 0 "USB Flash Disk" rev 2.00/11.00 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <USB, Flash Disk, 1100> SCSI0 0/direct removable serial.090c1000107221401526 sd0: 956MB, 512 bytes/sector, 1957888 sectors vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets softraid0: trying to bring up sd1 degraded softraid0: sd1 was not shutdown properly sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed sd1: 512001MB, 512 bytes/sector, 1048578087 sectors softraid0: roaming device -> wd0a softraid0: trying to bring up sd2 degraded softraid0: sd2 was not shutdown properly sd2 at scsibus3 targ 2 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed sd2: 512001MB, 512 bytes/sector, 1048578087 sectors softraid0: roaming device -> wd0b softraid0: trying to bring up sd3 degraded softraid0: sd3 was not shutdown properly sd3 at scsibus3 targ 3 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed sd3: 512001MB, 512 bytes/sector, 1048578087 sectors softraid0: roaming device -> wd0d softraid0: trying to bring up sd4 degraded softraid0: sd4 was not shutdown properly sd4 at scsibus3 targ 4 lun 0: <OPENBSD, SR RAID 1, 005> SCSI2 0/direct fixed sd4: 371724MB, 512 bytes/sector, 761292795 sectors softraid0: roaming device -> wd0e root on sd0a (43a6f54c63016c2d.a) swap on sd0b dump on sd0b WARNING: / was not properly unmounted drm: initializing kernel modesetting (RV280 0x1002:0x5960 0x1545:0x7C27). radeondrm0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (128M used) radeondrm0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF drm: PCI GART of 512M enabled (table at 0x0000000005639000). error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r200_cp" error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware! error: [drm:pid0:r100_startup] *ERROR* failed initializing CP (-2). error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration drm: radeon: cp finalized No connectors reported connected with modes Cannot find any crtc or sizes - going 1024x768 radeondrm0: 1024x768 wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation) softraid0: wd0a partition too small, at least 536871980544 bytes required