Hi,
I have an X31 ThinkPad on which I've installed OpenBSD. Everything
seems to be working fine, with the exception of suspend to RAM.
cat /etc/rc.conf.local
apmd_flags="-C"
Upon issuing the `zzz` command, the screen turns off, the machine
spins down and the little crescent-moon "sleep" indicator lights up.
But when woken, the screen comes up frozen with lots of vertical
stripes. Blind-typing comands into the console has no effect (e.g.
`zzz` from a root console then `halt -p` after the awakening attempt).
I've tried `zzz` from X as well as from the console, tried
`disable acpithinkpad` & `disable acpi` (independently from each
other) after "boot> -c", fiddled various settings in the BIOS...but
in all cases there is the same frozen screen with vertical stripes.
Because I've also had no luck getting suspend to work under Debian
(Stable & Testing), I'm thinking the issue might be an old graphics
card that's no longer supported. I realize this machine is over 10
years old and at some point dev effort must focus on more recent
hardware... but I just wanted to check & see if there's something else
to try that might get suspend working here.
Though a pretty meager machine performance-wise by today's standards,
from a physicality standpoint the X31 is IMO one of the nicest compact
laptops out there. Very nice keyboard (better key action than the
X201s I type this) and I like the "tall-screen" format (the low-res is
fine for me with the right bitmap font). And it has enough power for
my basic needs (running a shell, tmux, mutt, vim, elinks, ncmpcpp etc).
Anyhow, just trying to squeeze some more life out of this ThinkPad.
If I can't get suspend to work, maybe I'll look into swapping out the
mobo with something lightweight like a Pandaboard...
BTW -- this is my first experience with OpenBSD, and I have to say the
installation was incredibly straightforward and easy to understand.
Really liking what I see so far!
Thanks for any suggestions,
John
----
dmesg:
OpenBSD 5.5 (GENERIC) #276: Wed Mar 5 09:57:06 MST 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel" 686-class) 1.60
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,EST,TM2,PERF
real mem = 1341026304 (1278MB)
avail mem = 1306816512 (1246MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750, SMBIOS
rev. 2.33 @ 0xe0010 (57 entries)
bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005
bios0: IBM 2885PWU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) DOCK(S4)
USB0(S3) USB1(S3) AC9M(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCI1)
acpiprt3 at acpi0: bus -1 (DOCK)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB1, USB7
acpitz0 at acpi0: critical temperature is 91 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "IBM-08K8040" serial 16 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpibat2 at acpi0: BAT2 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 0xdc000/0x4000!
0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: Enhanced SpeedStep 1599 MHz: speeds: 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 3
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 3
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 6
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0xb0000000/0x1000
2:0:1: mem address conflict 0xb1000000/0x1000
cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 3
cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 5
"Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured
em0 at pci2 dev 1 function 0 "Intel 82540EP" rev 0x03: irq 3, address
00:0d:60:80:8a:0d
ipw0 at pci2 dev 2 function 0 "Intel PRO/Wireless 2100" rev 0x04: irq 5,
address 00:0c:f1:26:51:a6
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 5
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 1GB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 5, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (b5e7324a89417ecd.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RV100 0x1002:0x4C59 0x1014:0x052F).
radeondrm0: GTT: 256M 0xD0000000 - 0xDFFFFFFF
radeondrm0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (16M used)
drm: Panel ID String: 1024x768
drm: Panel Size 1024x768
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
--
John Magolske
http://B79.net/contact
