On Thursday, October 23, 2014 22:59 CEST, Fred <[email protected]> wrote: > Hi Sebastian, > > I've just installed -current on my Libretto 70CT - as you can see from > the output below it stoped with: > > kernel: integer divide fault trap, code=0 > > Rebooted it and disable it, schsio and softraid and it has now made it > to the end of boot - but it has not yet made it to a login prompt. > > Last time I tried this I left it running for about a week - and still > did not make it to a login prompt.
As I wrote on ports@, my Libretto 60 with 32 MB RAM, and disabled "it" and "schsio" works, slow but, flawlessly. However no X, since ISA cards are not supported by xorg anymore. Sebastian > > hth > > Fred > > PS I've CC misc@ for the archives rather than clog up ports@ > > Script started on Thu Oct 23 21:10:34 2014 > port:fred ~> cu -l /dev/cuaU0 > Connected to /dev/cuaU0 (speed 9600) > >> OpenBSD/i386 BOOT 3.26 > boot> > \|/-\|/booting hd0a:/bsd: > -\|/-9699132\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+1067500 > > [72+403280|/-\|/-\|/-\|/-\|/-\|/-\+397651|/-\|/-\|/-\|/-\|/-\|/-\|]=0xb083b0 > entry point at 0x200120 > > [ using 801416 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2014 OpenBSD. All rights reserved. > http://www.OpenBSD.org > > OpenBSD 5.6-current (GENERIC) #415: Wed Oct 22 11:33:32 MDT 2014 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 121 MHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX > real mem = 16412672 (15MB) > avail mem = 3915776 (3MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: AT/286+ BIOS, date 11/11/97 > apm0 at bios0: Power Management spec V1.2 > pcibios at bios0 function 0x1a not configured > bios0: ROM list: 0xe4000/0xc000 > cpu0 at mainbus0: (uniprocessor) > cpu0: F00F bug workaround installed > isa0 at mainbus0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > wsmouse0 at pms0 mux 0 > vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072 > wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > wdc0 at isa0 port 0x1f0/8 irq 14 > wd0 at wdc0 channel 0 drive 0: <IBM-DDLA-21620> > wd0: 16-sector PIO, LBA, 1551MB, 3177216 sectors > wd0(wdc0:0:0): using BIOS timings > sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01 > midi0 at sb0: <SB MIDI UART> > audio0 at sb0 > opl at sb0 not configured > wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4) > audio1 at wss0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536 > pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B > pcmcia0 at pcic0 controller 0 socket 0 > xe0 at pcmcia0 function 0 "Xircom, CreditCard 10Base-T, PS-CE2-10" port > 0x340/16, irq 9: address 00:80:c7:42:37:d9 > pcmcia1 at pcic0 controller 0 socket 1 > pcic0: irq 11, polling enabled > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > kernel: integer divide fault trap, code=0 > Stopped at cpu_switchto+0x64: popl %ebx > ddb> ps > PID PPID PGRP UID S FLAGS WAIT COMMAND > 13605 0 0 0 2 0x14200 crypto > 21232 0 0 0 2 0x14200 pfpurge > 18646 0 0 0 2 0x14200 pcic0,0,1 > 14390 0 0 0 2 0x14200 pcic0,0,0 > 28330 0 0 0 2 0x14200 apm0 > 1636 0 0 0 2 0x14200 systqmp > 12593 0 0 0 2 0x14200 systq > 9503 0 0 0 2 0x14200 syswq > 25602 0 0 0 1 0x14200 idle0 > 2351 0 0 0 2 0x14200 kmthread > * 1 0 0 0 7 0 swapper > 0 -1 0 0 3 0x10200 wdccmd swapper > ddb> trace > cpu_switchto(d0e91014,d0e91000,d0d0af18,d03bc36c,0) at cpu_switchto+0x64 > (null)(102,0,0,0,0) at 0xcdb22063 > ddb> machine > sysregs acpi > ddb> machine sysregs > idtr: 0xf0621fc8/07ff > gdtr: 0xffffd037f060c000/ffff > ldtr: 0x0018 > tr: 0x0070 > cr0: 0x8001003b > cr2: 0x00000000 > cr3: 0x00faa000 > cr4: 0x00000000 > ddb> machie e ne acpi > disasm showval tree trace > ddb> machine acpi trace > ddb> machie ne acpi showval > Invalid input > ddb> boot reboot > rebooting... > >> OpenBSD/i386 BOOT 3.26 > boot> boot -c > \|/-\|/booting hd0a:/bsd: > -\|/-9699132\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+1067500 > > [72+403280|/-\|/-\|/-\|/-\|/-\|/-\+397651|/-\|/-\|/-\|/-\|/-\|/-\|]=0xb083b0 > entry point at 0x200120 > > [ using 801416 bytes of bsd ELF symbol table ] > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2014 OpenBSD. All rights reserved. > http://www.OpenBSD.org > > OpenBSD 5.6-current (GENERIC) #415: Wed Oct 22 11:33:32 MDT 2014 > [email protected]:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 121 MHz > cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX > real mem = 16412672 (15MB) > avail mem = 3915776 (3MB) > User Kernel Config > UKC> disable it > 327 it* disabled > 328 it* disabled > UKC> disable schsio > 315 schsio* disabled > 316 schsio* disabled > 317 schsio* disabled > 318 schsio* disabled > UKC> disable softraid > 6 softraid0 disabled > UKC> verbose > autoconf verbose enabled > UKC> quit > Continuing... > >>> probing for mpath0 > >>> mpath probe returned 1 > mpath0 at root > >>> probing for scsibus* > >>> scsibus probe returned 1 > >>> scsibus probe won > scsibus0 at mpath0: 256 targets > >>> probing for mainbus0 > >>> mainbus probe returned 1 > mainbus0 at root > >>> probing for pci* > >>> pci probe returned 0 > >>> probing for amdmsr0 > >>> amdmsr probe returned 0 > >>> probing for isa0 > >>> isa probe returned 0 > >>> probing for eisa0 > >>> eisa probe returned 0 > >>> probing for bios0 > >>> bios probe returned 1 > >>> probing for cpu0 > >>> cpu probe returned 0 > >>> probing for ioapic* > >>> ioapic probe returned 0 > >>> probing for vmt0 > >>> vmt probe returned 0 > >>> probing for esm0 > >>> esm probe returned 0 > >>> bios probe won > bios0 at mainbus0: AT/286+ BIOS, date 11/11/97 > >>> probing for apm0 > >>> apm probe returned 1 > >>> probing for mpbios0 > >>> mpbios probe returned 0 > >>> probing for pcibios0 > >>> pcibios probe returned 0 > >>> probing for acpi0 > >>> acpi probe returned 0 > >>> apm probe won > apm0 at bios0: Power Management spec V1.2 > >>> probing for mpbios0 > >>> mpbios probe returned 0 > >>> probing for pcibios0 > >>> pcibios probe returned 0 > >>> probing for acpi0 > >>> acpi probe returned 0 > >>> no winning probe > pcibios at bios0 function 0x1a not configured > bios0: ROM list: 0xe4000/0xc000 > >>> probing for pci* > >>> pci probe returned 0 > >>> probing for amdmsr0 > >>> amdmsr probe returned 0 > >>> probing for isa0 > >>> isa probe returned 0 > >>> probing for eisa0 > >>> eisa probe returned 0 > >>> probing for cpu0 > >>> cpu probe returned 1 > >>> probing for ioapic* > >>> ioapic probe returned 0 > >>> probing for vmt0 > >>> vmt probe returned 0 > >>> probing for esm0 > >>> esm probe returned 0 > >>> cpu probe won > cpu0 at mainbus0: (uniprocessor) > cpu0: F00F bug workaround installed > >>> probing for pci* > >>> pci probe returned 0 > >>> probing for amdmsr0 > >>> amdmsr probe returned 0 > >>> probing for isa0 > >>> isa probe returned 1 > >>> probing for eisa0 > >>> eisa probe returned 0 > >>> probing for ioapic* > >>> ioapic probe returned 0 > >>> probing for vmt0 > >>> vmt probe returned 0 > >>> probing for esm0 > >>> esm probe returned 0 > >>> isa probe won > isa0 at mainbus0 > >>> probing for isadma0 > >>> probing for isadma0 succeeded > isadma0 at isa0 > >>> probing for ast0 > >>> probing for ast0 failed > >>> probing for com0 > >>> probing for com0 succeeded > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > >>> probing for com1 > >>> probing for com1 succeeded > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo > >>> probing for com2 > >>> probing for com2 failed > >>> probing for cy0 > >>> probing for cy0 failed > >>> probing for pckbc0 > >>> probing for pckbc0 succeeded > pckbc0 at isa0 port 0x60/5 > >>> probing for pckbd* > >>> pckbd probe returned 2 > >>> probing for pms* > >>> pms probe returned 0 > >>> pckbd probe won > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > >>> probing for wskbd* > >>> wskbd probe returned 1 > >>> wskbd probe won > wskbd0 at pckbd0: console keyboard > >>> probing for pckbd* > >>> pckbd probe returned 0 > >>> probing for pms* > >>> pms probe returned 1 > >>> pms probe won > pms0 at pckbc0 (aux slot) > pckbc0: using irq 12 for aux slot > >>> probing for wsmouse* > >>> wsmouse probe returned 1 > >>> wsmouse probe won > wsmouse0 at pms0 mux 0 > >>> probing for vga0 > >>> probing for vga0 succeeded > vga0 at isa0 port 0x3b0/48 iomem 0xa0000/131072 > >>> probing for intagp* > >>> intagp probe returned 0 > >>> probing for inteldrm* > >>> inteldrm probe returned 0 > >>> probing for wsdisplay0 > >>> wsdisplay probe returned 10 > >>> wsdisplay probe won > wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > >>> probing for pcdisplay0 > >>> probing for pcdisplay0 failed > >>> probing for bha0 > >>> probing for bha0 failed > >>> probing for aic0 > >>> probing for aic0 failed > >>> probing for aha0 > >>> probing for aha0 failed > >>> probing for aha1 > >>> probing for aha1 failed > >>> probing for uha0 > >>> probing for uha0 failed > >>> probing for wdc0 > >>> probing for wdc0 succeeded > wdc0 at isa0 port 0x1f0/8 irq 14 > >>> probing for atapiscsi* > >>> atapiscsi probe returned 0 > >>> probing for wd* > >>> wd probe returned 1 > >>> wd probe won > wd0 at wdc0 channel 0 drive 0: <IBM-DDLA-21620> > wd0: 16-sector PIO, LBA, 1551MB, 3177216 sectors > wd0(wdc0:0:0): using BIOS timings > >>> probing for wdc1 > >>> probing for wdc1 failed > >>> probing for lc0 > >>> probing for lc0 failed > >>> probing for lc1 > >>> probing for lc1 failed > >>> probing for ne0 > >>> probing for ne0 failed > >>> probing for ne1 > >>> probing for ne1 failed > >>> probing for ne2 > >>> probing for ne2 failed > >>> probing for we0 > >>> probing for we0 failed > >>> probing for we1 > >>> probing for we1 failed > >>> probing for ec0 > >>> probing for ec0 failed > >>> probing for ep0 > >>> probing for ep0 failed > >>> probing for ep* > >>> probing for ep* finished > >>> probing for ie0 > >>> probing for ie0 failed > >>> probing for ex0 > >>> probing for ex0 failed > >>> probing for le0 > >>> probing for le0 failed > >>> probing for sm0 > >>> probing for sm0 failed > >>> probing for mpu* > >>> probing for mpu* finished > >>> probing for sb0 > >>> probing for sb0 succeeded > sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.01 > >>> probing for audio* > >>> audio probe returned 0 > >>> probing for midi* > >>> midi probe returned 1 > >>> midi probe won > midi0 at sb0: <SB MIDI UART> > >>> probing for audio* > >>> audio probe returned 1 > >>> probing for midi* > >>> midi probe returned 0 > >>> audio probe won > audio0 at sb0 > >>> probing for audio* > >>> audio probe returned 0 > >>> probing for midi* > >>> midi probe returned 0 > >>> no winning probe > opl at sb0 not configured > >>> probing for pas0 > >>> probing for pas0 failed > >>> probing for wss0 > >>> probing for wss0 succeeded > wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4) > >>> probing for audio* > >>> audio probe returned 1 > >>> audio probe won > audio1 at wss0 > >>> probing for gus0 > >>> probing for gus0 failed > >>> probing for pcppi0 > >>> probing for pcppi0 succeeded > pcppi0 at isa0 port 0x61 > >>> probing for spkr0 > >>> spkr probe returned 1 > >>> spkr probe won > spkr0 at pcppi0 > >>> no winning probe > >>> probing for lpt0 > >>> probing for lpt0 succeeded > lpt0 at isa0 port 0x378/4 irq 7 > >>> probing for lpt1 > >>> probing for lpt1 failed > >>> probing for lpt2 > >>> probing for lpt2 failed > >>> probing for wbsio* > >>> probing for wbsio* finished > >>> probing for wbsio* > >>> probing for wbsio* finished > >>> probing for lm0 > >>> probing for lm0 failed > >>> probing for fins0 > >>> probing for fins0 failed > >>> probing for nsclpcsio* > >>> probing for nsclpcsio* finished > >>> probing for nsclpcsio* > >>> probing for nsclpcsio* finished > >>> probing for gscsio* > >>> probing for gscsio* finished > >>> probing for gscsio* > >>> probing for gscsio* finished > >>> probing for viasio* > >>> probing for viasio* finished > >>> probing for viasio* > >>> probing for viasio* finished > >>> probing for aps0 > >>> probing for aps0 failed > >>> probing for npx0 > >>> probing for npx0 succeeded > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > >>> probing for fdc0 > >>> probing for fdc0 failed > >>> probing for isapnp0 > >>> probing for isapnp0 failed > >>> probing for pcic0 > >>> probing for pcic0 succeeded > pcic0 at isa0 port 0x3e0/2 iomem 0xd0000/65536 > pcic0 controller 0: <Intel 82365SL rev 1> has sockets A and B > >>> probing for pcmcia* > >>> pcmcia probe returned 1 > >>> pcmcia probe won > pcmcia0 at pcic0 controller 0 socket 0 > >>> probing for ep* > >>> ep probe returned 0 > >>> probing for ne* > >>> ne probe returned 0 > >>> probing for wi* > >>> wi probe returned 0 > >>> probing for an* > >>> an probe returned 0 > >>> probing for malo* > >>> malo probe returned 0 > >>> probing for com* > >>> com probe returned 0 > >>> probing for aic* > >>> aic probe returned 0 > >>> probing for wdc* > >>> wdc probe returned 0 > >>> probing for sm* > >>> sm probe returned 0 > >>> probing for xe* > >>> xe probe returned 1 > >>> xe probe won > xe0 at pcmcia0 function 0 "Xircom, CreditCard 10Base-T, PS-CE2-10" port > 0x340/16, irq 9: address 00:80:c7:42:37:d9 > >>> probing for pcmcia* > >>> pcmcia probe returned 1 > >>> pcmcia probe won > pcmcia1 at pcic0 controller 0 socket 1 > pcic0: irq 11, polling enabled > >>> probing for pcic1 > >>> probing for pcic1 failed > >>> probing for pcic2 > >>> probing for pcic2 failed > >>> probing for vscsi0 > >>> vscsi probe returned 1 > vscsi0 at root > >>> probing for scsibus* > >>> scsibus probe returned 1 > >>> scsibus probe won > scsibus1 at vscsi0: 256 targets > root device softraid not configured > root on wd0a (9707248c8ad00ff2.a) swap on wd0b dump on wd0b > [EOT] > port:fred ~> exit > Script done on Thu Oct 23 21:50:16 2014
