Etienne <[email protected]> wrote:
> Hello list,
>
> I seem to have a little hardware related problem. I have been using a
> Lenovo x120e for some time, and OpenBSD ran nicely on it until April. As
> soon as I upgraded to 5.5, and from quite early after kernel loading,
> the console started showing and repeating at regular intervals:
>
> acpitz0: critical temperature reached 93C, shutting down
> acpithinkpad0: Unknown event 0x6022
>
> ("93C" is just a typical value, I've seen any between 92 and 98). I
> usually have just the time to log in before the system logs me out and
> shuts down. This laptop normally runs at around 80??C, and I think the
> temperature reading in OpenBSD is correct, because I get similar
> warnings
> and temperature values when I reboot immediately into another OS.
>
> Booting on 5.6 bsd.rd and upgrading the system went fine, but as soon as
> I restarted the system, the same situation happened. Feeling
> adventurous,
> I tried to disable acpitz* during the boot process, which made the
> messages
> go away. The system ran just below 100??C (as reported by sysctl) for
> some time without any problem, until I didn't want to take the risk for
> any longer and shut it down manually. I also have an x100e from the same
> brand, quite similar even if older and slower, which does _NOT_ show the
> same symptoms. I'm attaching the dmesg and sysctl hw.sensors output of
> both
> machines running 5.6.
>
> Has anyone been running 5.5 and 5.6 on a x120e? Any clues on what I
> should
> do to diagnose the problem any better?
>
> Cheers!
>
I have no trouble running 5.6 and had no trouble running 5.5 on my
x120e. Is your computer actually getting up to 92 degC? I do run with
apmd -L, which helps to reduce temperature, but that's still insane.
-- Martin
OpenBSD 5.6 (GENERIC.MP) #2: Tue Oct 28 11:13:59 CET 2014
[email protected]:/binpatchng/work-binpatch56-amd64/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16736387072 (15961MB)
avail mem = 16282083328 (15527MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf9ba0 (60 entries)
bios0: vendor LENOVO version "8FET27WW (1.11 )" date 03/24/2011
bios0: LENOVO 0596CTO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG UEFI UEFI SSDT SSDT UEFI
acpi0: wakeup devices PB4_(S4) PB5_(S4) PB6_(S4) PB7_(S4) OHC1(S3) EHC1(S3)
OHC2(S3) EHC2(S3) OHC3(S3) EHC3(S3) OHC4(S3) SBAZ(S4) GEC_(S4) P2P_(S5)
SPB0(S4) SPB1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD E-350 Processor, 41193.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD E-350 Processor, 1596.60 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line
16-way L2 cache
cpu1: 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-31
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB4_)
acpiprt2 at acpi0: bus -1 (PB5_)
acpiprt3 at acpi0: bus 1 (PB6_)
acpiprt4 at acpi0: bus -1 (PB7_)
acpiprt5 at acpi0: bus 2 (P2P_)
acpiprt6 at acpi0: bus 3 (SPB0)
acpiprt7 at acpi0: bus -1 (SPB1)
acpiprt8 at acpi0: bus -1 (SPB2)
acpiprt9 at acpi0: bus -1 (SPB3)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, PSS
acpicpu1 at acpi0: C2, PSS
acpitz0 at acpi0: critical temperature is 92 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "42T4785" serial 223 type LION oem "SANYO"
acpibtn2 at acpi0: LID_
cpu0: 41193 MHz: speeds: 1600 1280 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6310" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6310 HD Audio" rev 0x00: msi
azalia0: no supported codecs
ppb0 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800),
msi, address e8:9a:8f:19:50:13
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 19, AHCI
1.2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HTS72503, PC3Z> SCSI3 0/direct
fixed naa.5000cca645dbe4c6
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18,
version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x42: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x40: apic 2 int 16
azalia1: codecs: Conexant/0x5066
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci3 at ppb2 bus 3
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
urtwn0 at uhub0 port 2 "BayNETGEAR WNA1000M" rev 2.00/2.00 addr 2
urtwn0: could not set configuration no
umass0 at uhub1 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" rev
2.00/58.88 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
removable serial.0bda0158114173400000
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 305242MB, 512 bytes/sector, 625136753 sectors
root on sd2a (349206e6293c8a7c.a) swap on sd2b dump on sd2b
drm: initializing kernel modesetting (PALM 0x1002:0x9802 0x17AA:0x21DF).
radeondrm0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
radeondrm0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
drm: Internal thermal controller without fan control
radeondrm0: 1366x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
urtwn0 detached
urtwn0 at uhub0 port 2 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 28:c6:8e:f4:42:2c
hw.sensors.acpitz0.temp0=60.00 degC (zone temperature)
hw.sensors.acpithinkpad0.temp0=60.00 degC
hw.sensors.acpithinkpad0.temp1=0.00 degC
hw.sensors.acpithinkpad0.temp2=60.00 degC
hw.sensors.acpithinkpad0.temp3=0.00 degC
hw.sensors.acpithinkpad0.temp4=0.00 degC
hw.sensors.acpithinkpad0.temp5=0.00 degC
hw.sensors.acpithinkpad0.temp6=25.00 degC
hw.sensors.acpithinkpad0.temp7=0.00 degC
hw.sensors.acpithinkpad0.fan0=501 RPM
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=10.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.24 VDC (current voltage)
hw.sensors.acpibat0.power0=13.72 W (rate)
hw.sensors.acpibat0.watthour0=43.13 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=2.38 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.47 Wh (low capacity)
hw.sensors.acpibat0.watthour3=38.02 Wh (remaining capacity), OK
hw.sensors.acpibat0.watthour4=47.52 Wh (design capacity)
hw.sensors.acpibat0.raw0=2 (battery charging), OK
hw.sensors.acpibtn2.indicator0=On (lid open)
hw.sensors.km0.temp0=60.12 degC
hw.sensors.softraid0.drive0=online (sd2), OK
