I've been trying to move from 5.4 to 5.6 on an old machine. Neither
5.6-release from the CD nor 5.6-current from the recent snapshots seem to
be able to use the Ethernet device. During power up, the link status
light is on, but then as the kernel loads it goes out and stays out.
What have I missed that I need to set for Ethernet? I don't see anything
that stands out in the man page lii(4) or on the web page plus56.html
Regards,
/Lars
kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev 2.00/1.00
addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct
removable serial.09511606146030377350
uplcom0 at uhub2 port 2 "Prolific Technology Inc. USB-Serial Controller" rev
1.10/3.00 addr 2
ucom0 at uplcom0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (1aedd50302d13ce8.a) swap on wd0b dump on wd0b
OpenBSD 5.6-current (GENERIC) #538: Sun Nov 23 15:37:19 MST 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,PERF
real mem = 2138066944 (2039MB)
avail mem = 2090835968 (1993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/04/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf06e0 (37 entries)
bios0: vendor American Megatrends Inc. version "1001" date 05/04/2008
bios0: ASUSTeK Computer INC. 701
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC OEMB MCFG
acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) MC97(S4)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 70MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P3)
acpiprt2 at acpi0: bus 3 (P0P5)
acpiprt3 at acpi0: bus 1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 model "701" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 800x480
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1 int 17,
address 00:22:15:45:2c:b4
atphy0 at lii0 phy 1: F2 10/100 PHY, rev. 2
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev 2.00/1.00
addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct
removable serial.09511606146030377350
uplcom0 at uhub2 port 2 "Prolific Technology Inc. USB-Serial Controller" rev
1.10/3.00 addr 2
ucom0 at uplcom0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (1aedd50302d13ce8.a) swap on wd0b dump on wd0b
syncing disks...
OpenBSD 5.6-current (GENERIC) #538: Sun Nov 23 15:37:19 MST 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,PERF
real mem = 2138066944 (2039MB)
avail mem = 2090835968 (1993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/04/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf06e0 (37 entries)
bios0: vendor American Megatrends Inc. version "1001" date 05/04/2008
bios0: ASUSTeK Computer INC. 701
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC OEMB MCFG
acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) MC97(S4)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 70MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P3)
acpiprt2 at acpi0: bus 3 (P0P5)
acpiprt3 at acpi0: bus 1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 model "701" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 800x480
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1 int 17,
address 00:22:15:45:2c:b4
atphy0 at lii0 phy 1: F2 10/100 PHY, rev. 2
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev 2.00/1.00
addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct
removable serial.09511606146030377350
sd0: 15079MB, 512 bytes/sector, 30881792 sectors
uplcom0 at uhub2 port 2 "Prolific Technology Inc. USB-Serial Controller" rev
1.10/3.00 addr 2
ucom0 at uplcom0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (1aedd50302d13ce8.a) swap on wd0b dump on wd0b
ole keyboard, usi
OpenBSD 5.6-current (GENERIC) #538: Sun Nov 23 15:37:19 MST 2014
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 900MHz ("GenuineIntel" 686-class) 631 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,PERF
real mem = 2138066944 (2039MB)
avail mem = 2090835968 (1993MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/04/08, BIOS32 rev. 0 @ 0xf0010, SMBIOS
rev. 2.5 @ 0xf06e0 (37 entries)
bios0: vendor American Megatrends Inc. version "1001" date 05/04/2008
bios0: ASUSTeK Computer INC. 701
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC OEMB MCFG
acpi0: wakeup devices P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) MC97(S4)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) EUSB(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 70MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (P0P3)
acpiprt2 at acpi0: bus 3 (P0P5)
acpiprt3 at acpi0: bus 1 (P0P6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature is 90 degC
acpibat0 at acpi0: BAT0 model "701" serial type LION oem "ASUS"
acpiac0 at acpi0: AC unit online
acpiasus0 at acpi0
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x04
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 800x480
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x04 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC662
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x04: apic 1 int 16
pci1 at ppb0 bus 4
ppb1 at pci0 dev 28 function 1 "Intel 82801FB PCIE" rev 0x04: apic 1 int 17
pci2 at ppb1 bus 3
lii0 at pci2 dev 0 function 0 "Attansic Technology L2" rev 0xa0: apic 1 int 17,
address 00:22:15:45:2c:b4
atphy0 at lii0 phy 1: F2 10/100 PHY, rev. 2
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x04: apic 1 int 18
pci3 at ppb2 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x04: apic 1 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x04: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x04: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x04: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x04: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd4
pci4 at ppb3 bus 5
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x04: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x04: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 1 drive 0: <SILICONMOTION SM223AC>
wd0: 1-sector PIO, LBA, 3815MB, 7815024 sectors
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x04: apic 1 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 5 configuration 1 interface 0 "ENE UB6225" rev 2.00/1.00
addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CardReader SD0, 0100> SCSI0 0/direct
removable serial.09511606146030377350
sd0: 15079MB, 512 bytes/sector, 30881792 sectors
uplcom0 at uhub2 port 2 "Prolific Technology Inc. USB-Serial Controller" rev
1.10/3.00 addr 2
ucom0 at uplcom0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (1aedd50302d13ce8.a) swap on wd0b dump on wd0b
