Ok, thanks all for reply me.
Situation Fresh New Install. 5.6 Release.
OpenBsd Installed fine. Logged in as root -> startx -> blank screen.
I have to press CTRL+ALT+F1 to get console(blank) close the lid -> suspend
the machine -> open the lid -> on console again.
Done my homework
--- DMESG ---
OpenBSD 5.6 (RAMDISK_CD) #303: Fri Aug 8 00:25:26 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4138713088 (3946MB)
avail mem = 4023148544 (3836MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries)
bios0: vendor LENOVO version "5ECN95WW(V9.00)" date 12/19/2012
bios0: LENOVO 20150
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP
FPDT MSDM SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2203.97 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 7 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
"Attansic Technology AR8162" rev 0x10 at pci1 dev 0 function 0 not
configured
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
"Atheros AR9485" rev 0x01 at pci2 dev 0 function 0 not configured
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
ehci1: timed out waiting for BIOS
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel HM76 LPC" rev 0x04 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST1000LM024 HN-M, 2AR1> SCSI3 0/direct
fixed naa.50004cf20a2e7a39
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus0 targ 2 lun 0: <PLDS, DVD-RW DS8A8SH, KL31> ATAPI 5/cdrom
removable
"Intel 7 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
uhub2 at uhub0 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
umass0 at uhub2 port 2 configuration 1 interface 0 "Kingston DataTraveler
2.0" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
0/direct removable serial.09306544CE51C98D948F
sd1: 7396MB, 512 bytes/sector, 15148608 sectors
"Atheros Communications Bluetooth USB Host Controller" rev 1.10/0.01 addr 4
at uhub2 port 3 not configured
"Generic USB2.0-CRW" rev 2.00/39.60 addr 5 at uhub2 port 4 not configured
uhub3 at uhub1 port 1 "vendor 0x8087 product 0x0024" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "vendor 0x0461 USB
Optical Mouse" rev 2.00/2.00 addr 3
uhidev0: iclass 3/1
uhid at uhidev0 not configured
run0 at uhub3 port 4 "Linksys Linksys WUSB600N Wireless-N USB Network
Adapter with Dual-Band ver. 2" rev 2.00/1.01 addr 4
run0: MAC/BBP RT3572 (rev 0x0223), RF RT3052 (MIMO 2T2R), address
98:fc:11:e0:59:0a
"Vimicro Corp. Lenovo EasyCamera" rev 2.00/39.55 addr 5 at uhub3 port 6 not
configured
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting...
OpenBSD 5.6 (GENERIC.MP) #333: Fri Aug 8 00:20:21 MDT 2014
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 4138713088 (3946MB)
avail mem = 4019757056 (3833MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6fd0 (59 entries)
bios0: vendor LENOVO version "5ECN95WW(V9.00)" date 12/19/2012
bios0: LENOVO 20150
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI ASF! HPET APIC MCFG SSDT BOOT ASPT DBGP
FPDT MSDM SSDT SSDT
acpi0: wakeup devices P0P1(S0) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S0) PXSX(S3)
PXSX(S3) PXSX(S3) PXSX(S3) PXSX(S3) RP05(S0) PXSX(S3) RP06(S0) PXSX(S3)
RP07(S0) PXSX(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2394.95 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Pentium(R) CPU B980 @ 2.40GHz, 2394.56 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpitz0 at acpi0: critical temperature is 127 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT1 model "PABAS0241231" serial 41167 type Li-Ion oem
"LENOVO "
acpiac0 at acpi0: AC unit online
acpibtn2 at acpi0: LID0
acpivideo0 at acpi0: VGA_
acpivideo1 at acpi0: VGA_
acpivideo2 at acpi0: GFX0
acpivout0 at acpivideo2: DD02
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2400, 2300, 2200, 2100, 2000,
1900, 1800, 1700, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
intagp at vga1 not configured
inteldrm0 at vga1
drm0 at inteldrm0
drm: Memory usable by graphics device = 2048M
inteldrm0: 1366x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 7 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 16
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant/0x506e, Intel/0x2806, using Conexant/0x506e
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
"Attansic Technology AR8162" rev 0x10 at pci1 dev 0 function 0 not
configured
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
"Atheros AR9485" rev 0x01 at pci2 dev 0 function 0 not configured
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 0 int 23
ehci1: timed out waiting for BIOS
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM76 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST1000LM024 HN-M, 2AR1> SCSI3 0/direct
fixed naa.50004cf20a2e7a39
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 2 lun 0: <PLDS, DVD-RW DS8A8SH, KL31> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 0
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 3 "Atheros Communications Bluetooth USB Host
Controller" rev 1.10/0.01 addr 3
ugen1 at uhub2 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "Primax Electronics USB
Optical Mouse" rev 2.00/2.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
run0 at uhub3 port 4 "Linksys Linksys WUSB600N Wireless-N USB Network
Adapter with Dual-Band ver. 2" rev 2.00/1.01 addr 4
run0: MAC/BBP RT3572 (rev 0x0223), RF RT3052 (MIMO 2T2R), address
98:fc:11:e0:59:0a
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Vimicro Corp. Lenovo
EasyCamera" rev 2.00/39.55 addr 5
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (e6bde91fd35dc49f.a) swap on sd0b dump on sd0b
ugen0 detached
ugen1 detached
uhub2 detached
uhub0 detached
wsmouse1 detached
ums0 detached
uhidev0 detached
run0 detached
video0 detached
uvideo0 detached
uhub3 detached
uhub1 detached
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 3 "Atheros Communications Bluetooth USB Host
Controller" rev 1.10/0.01 addr 3
ugen1 at uhub2 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhidev0 at uhub3 port 3 configuration 1 interface 0 "Primax Electronics USB
Optical Mouse" rev 2.00/2.00 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
run0 at uhub3 port 4 "Linksys Linksys WUSB600N Wireless-N USB Network
Adapter with Dual-Band ver. 2" rev 2.00/1.01 addr 4
run0: MAC/BBP RT3572 (rev 0x0223), RF RT3052 (MIMO 2T2R), address
98:fc:11:e0:59:0a
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Vimicro Corp. Lenovo
EasyCamera" rev 2.00/39.55 addr 5
video0 at uvideo0
umass0 at uhub2 port 2 configuration 1 interface 0 "Kingston DataTraveler
2.0" rev 2.00/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd1 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2
0/direct removable serial.09306544CE51D95769B7
sd1: 7396MB, 512 bytes/sector, 15148608 sectors
--- xorg.0.log ---
[ 52.736] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 52.737] linear framebuffer access unavailable
[ 52.744] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility
mode (version 3.32)
[ 52.782]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 52.782] X Protocol Version 11, Revision 0
[ 52.782] Build Operating System: OpenBSD 5.6 amd64
[ 52.782] Current Operating System: OpenBSD notleo.santagostini.info 5.6
GENERIC.MP#333 amd64
[ 52.782] Build Date: 06 August 2014 01:45:22PM
[ 52.782]
[ 52.789] Current version of pixman: 0.32.6
[ 52.789] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 52.789] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 52.789] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 13
11:31:34 2014
[ 52.833] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 52.843] (==) No Layout section. Using the first Screen section.
[ 52.843] (==) No screen section available. Using defaults.
[ 52.843] (**) |-->Screen "Default Screen Section" (0)
[ 52.843] (**) | |-->Monitor "<default monitor>"
[ 52.844] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 52.844] (==) Disabling SIGIO handlers for input devices
[ 52.844] (==) Automatically adding devices
[ 52.844] (==) Automatically enabling devices
[ 52.844] (==) Not automatically adding GPU devices
[ 53.023] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 53.023] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 53.023] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 53.023] (II) Loader magic: 0x1e1f01207520
[ 53.023] (II) Module ABI versions:
[ 53.023] X.Org ANSI C Emulation: 0.4
[ 53.023] X.Org Video Driver: 15.0
[ 53.023] X.Org XInput driver : 20.0
[ 53.023] X.Org Server Extension : 8.0
[ 53.033] (--) PCI:*(0:0:2:0) 8086:0106:17aa:3977 rev 9
[ 53.033] Initializing built-in extension Generic Event Extension
[ 53.033] Initializing built-in extension SHAPE
[ 53.033] Initializing built-in extension MIT-SHM
[ 53.033] Initializing built-in extension XInputExtension
[ 53.033] Initializing built-in extension XTEST
[ 53.033] Initializing built-in extension BIG-REQUESTS
[ 53.033] Initializing built-in extension SYNC
[ 53.033] Initializing built-in extension XKEYBOARD
[ 53.033] Initializing built-in extension XC-MISC
[ 53.033] Initializing built-in extension SECURITY
[ 53.033] Initializing built-in extension XINERAMA
[ 53.033] Initializing built-in extension XFIXES
[ 53.033] Initializing built-in extension RENDER
[ 53.033] Initializing built-in extension RANDR
[ 53.033] Initializing built-in extension COMPOSITE
[ 53.034] Initializing built-in extension DAMAGE
[ 53.034] Initializing built-in extension MIT-SCREEN-SAVER
[ 53.034] Initializing built-in extension DOUBLE-BUFFER
[ 53.034] Initializing built-in extension RECORD
[ 53.034] Initializing built-in extension DPMS
[ 53.034] Initializing built-in extension Present
[ 53.034] Initializing built-in extension X-Resource
[ 53.034] Initializing built-in extension XVideo
[ 53.034] Initializing built-in extension XVideo-MotionCompensation
[ 53.034] Initializing built-in extension XFree86-VidModeExtension
[ 53.034] Initializing built-in extension XFree86-DGA
[ 53.034] Initializing built-in extension XFree86-DRI
[ 53.034] Initializing built-in extension DRI2
[ 53.034] (II) LoadModule: "glx"
[ 53.077] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 53.090] (II) Module glx: vendor="X.Org Foundation"
[ 53.090] compiled for 1.15.2, module version = 1.0.0
[ 53.090] ABI class: X.Org Server Extension, version 8.0
[ 53.090] (==) AIGLX enabled
[ 53.090] Loading extension GLX
[ 53.090] (==) Matched intel as autoconfigured driver 0
[ 53.090] (==) Matched vesa as autoconfigured driver 1
[ 53.090] (==) Assigned the driver to the xf86ConfigLayout
[ 53.090] (II) LoadModule: "intel"
[ 53.091] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[ 53.130] (II) Module intel: vendor="X.Org Foundation"
[ 53.130] compiled for 1.15.2, module version = 2.99.910
[ 53.130] Module class: X.Org Video Driver
[ 53.130] ABI class: X.Org Video Driver, version 15.0
[ 53.130] (II) LoadModule: "vesa"
[ 53.130] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 53.131] (II) Module vesa: vendor="X.Org Foundation"
[ 53.131] compiled for 1.15.2, module version = 2.3.3
[ 53.131] Module class: X.Org Video Driver
[ 53.131] ABI class: X.Org Video Driver, version 15.0
[ 53.131] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 53.131] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 53.131] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 53.131] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 53.131] (II) VESA: driver for VESA chipsets: vesa
[ 53.133] (WW) Falling back to old probe method for vesa
[ 53.134] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD
Graphics 2000
[ 53.134] (--) intel(0): CPU: x86-64
[ 53.134] (II) intel(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 53.134] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 53.134] (==) intel(0): RGB weight 888
[ 53.134] (==) intel(0): Default visual is TrueColor
[ 53.135] (**) intel(0): Framebuffer tiled
[ 53.135] (**) intel(0): Pixmaps tiled
[ 53.135] (**) intel(0): "Tear free" disabled
[ 53.135] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 53.144] (II) intel(0): Output LVDS1 has no monitor section
[ 53.144] (II) intel(0): Output VGA1 has no monitor section
[ 53.144] (II) intel(0): Output HDMI1 has no monitor section
[ 53.144] (II) intel(0): Output DP1 has no monitor section
[ 53.144] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 53.144] (--) intel(0): Output LVDS1 using initial mode 1366x768 on
pipe 0
[ 53.144] (==) intel(0): DPI set to (96, 96)
[ 53.144] (II) Loading sub module "dri2"
[ 53.144] (II) LoadModule: "dri2"
[ 53.144] (II) Module "dri2" already built-in
[ 53.144] (II) UnloadModule: "vesa"
[ 53.144] (II) Unloading vesa
[ 53.144] (==) Depth 24 pixmap format is 32 bpp
[ 53.166] (II) intel(0): SNA initialized with Sandybridge (gen6, gt1)
backend
[ 53.166] (==) intel(0): Backing store enabled
[ 53.166] (==) intel(0): Silken mouse disabled
[ 53.166] (II) intel(0): HW Cursor enabled
[ 53.166] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
disabled message.
[ 53.176] (==) intel(0): DPMS enabled
[ 53.177] (II) intel(0): [DRI2] Setup complete
[ 53.177] (II) intel(0): [DRI2] DRI driver: i965
[ 53.177] (II) intel(0): [DRI2] VDPAU driver: i965
[ 53.177] (II) intel(0): direct rendering: DRI2 Enabled
[ 53.177] (--) RandR disabled
[ 53.414] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 53.414] (II) AIGLX: enabled GLX_ARB_create_context
[ 53.414] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 53.414] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 53.414] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 53.414] (II) AIGLX: enabled GLX_SGI_swap_control and
GLX_MESA_swap_control
[ 53.414] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 53.414] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 53.414] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
objects
[ 53.414] (II) AIGLX: Loaded and initialized i965
[ 53.414] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 53.448] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using
pipe 0, position (0, 0), rotation normal, reflection none
[ 53.461] (II) intel(0): Setting screen physical size to 361 x 203
[ 53.901] (II) config/wscons: checking input device /dev/wskbd
[ 53.901] (II) wskbd: using layout latam
[ 53.908] (II) LoadModule: "kbd"
[ 53.921] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 53.934] (II) Module kbd: vendor="X.Org Foundation"
[ 53.934] compiled for 1.15.2, module version = 1.8.0
[ 53.934] Module class: X.Org XInput Driver
[ 53.934] ABI class: X.Org XInput driver, version 20.0
[ 53.934] (II) Using input driver 'kbd' for '/dev/wskbd'
[ 53.934] (**) /dev/wskbd: always reports core events
[ 53.934] (**) /dev/wskbd: always reports core events
[ 53.934] (**) Option "Protocol" "standard"
[ 53.934] (**) Option "XkbRules" "base"
[ 53.934] (**) Option "XkbModel" "pc105"
[ 53.934] (**) Option "XkbLayout" "latam"
[ 53.934] (II) XINPUT: Adding extended input device "/dev/wskbd" (type:
KEYBOARD, id 6)
[ 54.526] (II) config/wscons: checking input device /dev/wsmouse0
[ 54.526] (II) LoadModule: "synaptics"
[ 54.527] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[ 54.527] (II) Module synaptics: vendor="X.Org Foundation"
[ 54.527] compiled for 1.15.2, module version = 1.8.0
[ 54.527] Module class: X.Org XInput Driver
[ 54.527] ABI class: X.Org XInput driver, version 20.0
[ 54.528] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[ 54.528] (**) /dev/wsmouse0: always reports core events
[ 54.528] (**) Option "Device" "/dev/wsmouse0"
[ 55.588] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5788
resolution 58
[ 55.588] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 5066
resolution 113
[ 55.588] (**) /dev/wsmouse0: always reports core events
[ 55.644] (II) XINPUT: Adding extended input device "/dev/wsmouse0"
(type: TOUCHPAD, id 7)
[ 55.644] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now
constant deceleration 2.5
[ 55.644] (**) synaptics: /dev/wsmouse0: (accel) MaxSpeed is now 1.75
[ 55.644] (**) synaptics: /dev/wsmouse0: (accel) AccelFactor is now 0.035
[ 55.644] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[ 55.644] (**) /dev/wsmouse0: (accel) acceleration profile 1
[ 55.644] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[ 55.644] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[ 56.152] (II) config/wscons: checking input device /dev/wsmouse
[ 56.152] (II) LoadModule: "ws"
[ 56.174] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[ 56.175] (II) Module ws: vendor="X.Org Foundation"
[ 56.175] compiled for 1.15.2, module version = 1.3.0
[ 56.175] Module class: X.Org XInput Driver
[ 56.175] ABI class: X.Org XInput driver, version 20.0
[ 56.175] (II) Using input driver 'ws' for '/dev/wsmouse'
[ 56.175] (**) /dev/wsmouse: always reports core events
[ 56.175] (II) ws: /dev/wsmouse: debuglevel 0
[ 56.175] (**) Option "Device" "/dev/wsmouse"
[ 56.175] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[ 56.175] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[ 56.175] (**) ws: /dev/wsmouse: associated screen: 0
[ 56.175] (II) ws: /dev/wsmouse: minimum x position: 0
[ 56.175] (II) ws: /dev/wsmouse: maximum x position: 1365
[ 56.175] (II) ws: /dev/wsmouse: minimum y position: 0
[ 56.175] (II) ws: /dev/wsmouse: maximum y position: 767
[ 56.175] (==) ws: /dev/wsmouse: Buttons: 7
[ 56.176] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[ 56.176] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 8)
[ 56.176] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[ 56.176] (**) /dev/wsmouse: (accel) acceleration profile 0
[ 56.176] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[ 56.176] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[ 64.949] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 67.240] (II) UnloadModule: "ws"
[ 67.240] (II) UnloadModule: "synaptics"
[ 67.240] (II) UnloadModule: "kbd"
[ 67.270] (EE) Server terminated successfully (0). Closing log file.
--- pcidump -vvv ---
Domain /dev/pci0:
0:0:0: Intel Core 2G Host
0x0000: Vendor ID: 8086 Product ID: 0104
0x0004: Command: 0006 Status: 2090
0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 09
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:2:0: Intel HD Graphics 2000
0x0000: Vendor ID: 8086 Product ID: 0106
0x0004: Command: 0007 Status: 0090
0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 09
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000e0000000/0x00400000
0x0018: BAR mem prefetchable 64bit addr: 0x00000000d0000000/0x10000000
0x0020: BAR io addr: 0x00003000/0x0040
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
0x00d0: Capability 0x01: Power Management
0x00a4: Capability 0x13: PCI Advanced Features
0:20:0: Intel 7 Series xHCI
0x0000: Vendor ID: 8086 Product ID: 1e31
0x0004: Command: 0006 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 30 Revision: 04
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000e0600000/0x00010000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0:22:0: Intel 7 Series MEI
0x0000: Vendor ID: 8086 Product ID: 1e3a
0x0004: Command: 0006 Status: 0018
0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 04
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000e0614000/0x00000010
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x008c: Capability 0x05: Message Signaled Interrupts (MSI)
0:26:0: Intel 7 Series USB
0x0000: Vendor ID: 8086 Product ID: 1e2d
0x0004: Command: 0006 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 04
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xe0619000/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0058: Capability 0x0a: Debug Port
0x0098: Capability 0x13: PCI Advanced Features
0:27:0: Intel 7 Series HD Audio
0x0000: Vendor ID: 8086 Product ID: 1e20
0x0004: Command: 0006 Status: 0010
0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 04
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x00000000e0610000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 07 Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x10: PCI Express
0:28:0: Intel 7 Series PCIE
0x0000: Vendor ID: 8086 Product ID: 1e10
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: c4
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1
Secondary Latency Timer: 00
0x001c: I/O Base: 20 I/O Limit: 20 Secondary Status: 0000
0x0020: Memory Base: e050 Memory Limit: e050
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: fff1
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x1 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:28:1: Intel 7 Series PCIE
0x0000: Vendor ID: 8086 Product ID: 1e12
0x0004: Command: 0007 Status: 0010
0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: c4
0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
0x0010: 00000000
0x0014: 00000000
0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
Secondary Latency Timer: 00
0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 0000
0x0020: Memory Base: e040 Memory Limit: e040
0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: fff1
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 02 Line: 0b Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 5.0 GT/s Link Width: x1 / x1
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
0:29:0: Intel 7 Series USB
0x0000: Vendor ID: 8086 Product ID: 1e26
0x0004: Command: 0006 Status: 0290
0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 04
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xe0618000/0x00000400
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
0x0058: Capability 0x0a: Debug Port
0x0098: Capability 0x13: PCI Advanced Features
0:31:0: Intel HM76 LPC
0x0000: Vendor ID: 8086 Product ID: 1e59
0x0004: Command: 0007 Status: 0210
0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 04
0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0:31:2: Intel 7 Series AHCI
0x0000: Vendor ID: 8086 Product ID: 1e03
0x0004: Command: 0007 Status: 02b0
0x0008: Class: 01 Subclass: 06 Interface: 01 Revision: 04
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR io addr: 0x00003088/0x0008
0x0014: BAR io addr: 0x00003094/0x0004
0x0018: BAR io addr: 0x00003080/0x0008
0x001c: BAR io addr: 0x00003090/0x0004
0x0020: BAR io addr: 0x00003060/0x0020
0x0024: BAR mem 32bit addr: 0xe0617000/0x00000800
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x01: Power Management
0x00a8: Capability 0x12: SATA
0x00b0: Capability 0x13: PCI Advanced Features
0:31:3: Intel 7 Series SMBus
0x0000: Vendor ID: 8086 Product ID: 1e22
0x0004: Command: 0003 Status: 0280
0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 04
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000e0615000/0x00000100
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x00003040/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3977
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 03 Line: 0a Min Gnt: 00 Max Lat: 00
1:0:0: Attansic Technology AR8162
0x0000: Vendor ID: 1969 Product ID: 1090
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 10
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x00000000e0500000/0x00040000
0x0018: BAR io addr: 0x00002000/0x0080
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3979
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
0x0058: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
0x00c0: Capability 0x05: Message Signaled Interrupts (MSI)
0x00d8: Capability 0x11: Extended Message Signaled Interrupts (MSI-X)
2:0:0: Atheros AR9485
0x0000: Vendor ID: 168c Product ID: 0032
0x0004: Command: 0007 Status: 0010
0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 01
0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
0x0010: BAR mem 64bit addr: 0x00000000e0400000/0x00080000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 3218
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x01: Power Management
0x0050: Capability 0x05: Message Signaled Interrupts (MSI)
0x0070: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
After enabling machdep.allowaperture as xorg.0.log says, it still
haappening the same behaviour.
Regards,
Saludos.-
Leonardo Santagostini
<http://ar.linkedin.com/in/santagostini>
2014-12-12 9:29 GMT-03:00 Ville Valkonen <weezeld...@gmail.com>:
>
> On 12 December 2014 at 03:50, Leonardo Santagostini
> <lsantagost...@gmail.com> wrote:
> > Hello @misc,
> >
> > This mail is regarding about issues that im facing after doing a fresh
> > install of 5.6 RELEASE and snapshot on my latptop
> >
> > The point is that after installing sucessfully i am trying to start X but
> > screen goes black. The only way i have to go to console is pressing
> > CTRL+ALT+F1 after lid close, suspend and resume.
> >
> > Just wanting to know what is the best way i can help you regarding this.
> >
> > i know sending:
> >
> > 1) dmesg
> > 2) x.org.log
> >
> > Is ok, but i have no idea what else could help.
> >
> > So, please, just let me know what else is needed, so i can do my
> homework.
> >
> > (Also i tried snapshot from 12/08 but an libc version problem appears
> when
> > x starts)
> >
> > Regards,
> > Leonardo Santagostini
> >
> > <http://ar.linkedin.com/in/santagostini>
>
> Hello Leonardo,
>
> have you done fw_update -v ? Hard to say if it's needed since you
> didn't include the dmesg.
>
> --
> Regards,
> Ville Valkonen
