Does Amv7 support sunxi SoC router board Lamobo R1 (BPi-R1)? Lamobo R1 (BPi-R1)
highlight: 1. Allwinner A20 sunxi SoC 2 .FIVE 10/100/1000 Ethernet port 3. native 2.5 SATA disk port 4. about $75 BPI- R1 - a 300Mbps Wireless N Router with both wired and wireless network, Dual Core-CPU, 1G-RAM, GigaByte Ethernet, With two antennas website: http://www.bananapi.com/index.php/component/content/article?layout=edit&id=59 CPU A20 ARM Cortex™-A7 Dual-Core GPU ARM Mali400MP2Complies with OpenGL ES 2.0/1.1 Memory (SDRAM) 1GB DDR3 (shared with GPU) Onboard Storage Micro SD (Max. 64GB) card slot UP to 2T on 2.5 SATA disk Onboard Network 10/100/1000 Ethernet RJ45, WLAN @802.11b/g/n Video Input A CSI input connector allows for the connection of a designed camera module Video Outputs HDMI , LVDS/RGB Audio Output Audio Input 3.5 mm Jack and HDMI Microphone Power Source 5 volt via Micro USB(DC In Only) USB 2.0 Ports USB Host and Micro USB (OTG) USB Host Buttons Reset button: Next to Power button Power button: Next to Battery connector GPIO(2X13) pin GPIO,UART,I2C bus ,SPI bus with two chip selects, CAN bus,ADC,PWM,+3.3v,+5v,ground. LED Power Key & RJ45 Remote IR OS Android 4.2, Linux Interface definition Produxt size 148 mm × 100mm Weight 83g
