according http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/arch/armv7/armv7/armv7.c?rev=1.4
Only one board supported in current with two Gigabit ports ,Compulab UTILITE box ? Anyone can make sure? http://www.compulab.co.il/utilite-computer/web/utilite-models http://www.compulab.co.il/support/life-cycle/ start $159 Freescale i.MX6 @1.2GHz Up to 4GB DDR3 Up to 512GB SSD HDMI + DVI-D, 1920x1200 12V supply, 3-8W WiFi 802.11b/g/n + BT 3.0 1000Mb Ethernet x2 USB2.0 x4 Audio I/O RS232 x2 ----------- case BOARD_ID_IMX6_CUBOXI: printf(": i.MX6 SolidRun CuBox-i\n"); imx6_init(); sc->sc_board_devs = hummingboard_devs; break; case BOARD_ID_IMX6_HUMMINGBOARD: printf(": i.MX6 SolidRun HummingBoard\n"); imx6_init(); sc->sc_board_devs = hummingboard_devs; break; case BOARD_ID_IMX6_PHYFLEX: printf(": PhyFLEX-i.MX6\n"); imx6_init(); sc->sc_board_devs = phyflex_imx6_devs; break; case BOARD_ID_IMX6_SABRELITE: printf(": i.MX6 SABRE Lite\n"); imx6_init(); sc->sc_board_devs = sabrelite_devs; break; case BOARD_ID_IMX6_UDOO: printf(": i.MX6 UDOO\n"); imx6_init(); sc->sc_board_devs = udoo_devs; break; case BOARD_ID_IMX6_UTILITE: printf(": i.MX6 Utilite\n"); imx6_init(); sc->sc_board_devs = utilite_devs; break; case BOARD_ID_IMX6_WANDBOARD: printf(": i.MX6 Wandboard\n"); imx6_init(); sc->sc_board_devs = wandboard_devs; break; case BOARD_ID_OMAP3_BEAGLE: printf(": BeagleBoard\n"); omap3_init(); sc->sc_board_devs = beagleboard_devs; break; case BOARD_ID_AM335X_BEAGLEBONE: printf(": BeagleBone\n"); am335x_init(); sc->sc_board_devs = beaglebone_devs; break; case BOARD_ID_OMAP3_OVERO: printf(": Gumstix Overo\n"); omap3_init(); sc->sc_board_devs = overo_devs; break; case BOARD_ID_OMAP4_PANDA: printf(": PandaBoard\n"); omap4_init(); sc->sc_board_devs = pandaboard_devs; break; case BOARD_ID_SUN4I_A10: printf(": A1X\n"); sxia1x_init(); sc->sc_board_devs = sun4i_devs; issunxi = 1; break; case BOARD_ID_SUN7I_A20: printf(": A20\n"); sxia20_init(); sc->sc_board_devs = sun7i_devs; issunxi = 1; break;
