Is there anything I can do about this? Or is it a lost cause?
athn0 at uhub0 port 4 "ATHEROS UB93" rev 2.00/1.08 addr 2
athn0: could not load firmware
I have updated the firmware IAW fw_update(1), and verified that the
firmware files mentioned in athn(4) are where they should be. The
manual doesn't mention this error specifically, however it is similar to
the "could not read" error that is mentioned. I'm mainly curious if
anyone has a similar device that uses athn and is working. I have
another device that uses run(4) that operated without problems. It
would just be more convenient to use the athn device for this box and
the run for another. Any suggestions welcomed.
Thanks,
Edgar
# dmesg
OpenBSD 5.7-beta (GENERIC.MP) #740: Tue Jan 6 18:19:48 MST 2015
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3721445376 (3549MB)
avail mem = 3618508800 (3450MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe9590 (50 entries)
bios0: vendor American Megatrends Inc. version "V2.0" date 02/04/2013
bios0: MSI MS-7786
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT
acpi0: wakeup devices SBAZ(S4) PS2K(S3) PS2M(S3) P0PC(S4) UHC1(S4)
UHC2(S4) USB3(S4) UHC4(S4) USB5(S4) UHC6(S4) UHC7(S4) PE20(S4) PE21(S4)
PE22(S4) PE23(S4) BR12(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD A4-3400 APU with Radeon(tm) HD Graphics, 2695.42 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.0.0.0.0, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD A4-3400 APU with Radeon(tm) HD Graphics, 2695.11 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully
associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully
associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 3 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P0PC)
acpiprt2 at acpi0: bus -1 (PE20)
acpiprt3 at acpi0: bus -1 (PE21)
acpiprt4 at acpi0: bus -1 (PE22)
acpiprt5 at acpi0: bus -1 (PE23)
acpiprt6 at acpi0: bus -1 (BR12)
acpiprt7 at acpi0: bus 1 (BR14)
acpiprt8 at acpi0: bus -1 (BR15)
acpiprt9 at acpi0: bus -1 (BR17)
acpiprt10 at acpi0: bus -1 (BR16)
acpicpu0 at acpi0: C2
acpicpu1 at acpi0: C2
acpibtn0 at acpi0: PWRB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 12h Host" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Radeon HD 6410D" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD 6500D HD Audio" rev
0x00: msi
azalia0: no supported codecs
ppb0 at pci0 dev 4 function 0 "AMD AMD64 12h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: RTL8168E/8111E-VL
(0x2c80), msi, address d4:3d:7e:ba:37:33
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 5
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 3 int
19, AHCI 1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 1 lun 0: <ATA, ST500DM002-1BD14, KC48> SCSI3
0/direct fixed naa.5000c50066b38e26
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVDRAM GH24NSB0, LN01> ATAPI
5/cdrom removable
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 3 int
18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 3 int 17
ehci0: halt timeout
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 3 int
18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 3 int 17
ehci1: halt timeout
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x14: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x53: 4GB DDR3 SDRAM PC3-10600
pciide0 at pci0 dev 20 function 1 "AMD Hudson-2 IDE" rev 0x00: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: apic
3 int 16
azalia1: codecs: Realtek/0x0887
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
ppb1 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci2 at ppb1 bus 2
ohci2 at pci0 dev 20 function 5 "AMD Hudson-2 USB" rev 0x11: apic 3 int
18, version 1.0, legacy support
sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev
0x00: apic 3 int 16
sdhc0 at 0x10: can't map registers
ohci3 at pci0 dev 22 function 0 "AMD Hudson-2 USB" rev 0x11: apic 3 int
18, version 1.0, legacy support
ehci2 at pci0 dev 22 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 3 int 17
usb2 at ehci2: USB revision 2.0
uhub2 at usb2 "AMD EHCI root hub" rev 2.00/1.00 addr 1
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb6 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb7 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 "AMD OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 "AMD OHCI root hub" rev 1.00/1.00 addr 1
athn0 at uhub0 port 1 "ATHEROS UB93" rev 2.00/1.08 addr 2
run0 at uhub2 port 4 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5390 (rev 0x0502), RF RT5370 (MIMO 1T1R), address
00:0f:60:01:b4:75
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/63.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (f2d24fd8b3fc0ad8.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
drm: initializing kernel modesetting (SUMO2 0x1002:0x9644 0x1462:0x7786).
radeondrm0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeondrm0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
drm: PCIE GART of 512M enabled (table at 0x0000000000040000).
drm: Internal thermal controller without fan control
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
athn0: could not load firmware
athn0 detached
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/63.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/63.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/63.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/63.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/63.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev0 detached
athn0 at uhub0 port 4 "ATHEROS UB93" rev 2.00/1.08 addr 2
athn0: could not load firmware
athn0 detached
athn0 at uhub0 port 4 "ATHEROS UB93" rev 2.00/1.08 addr 2
athn0: could not load firmware
athn0 detached
athn0 at uhub0 port 4 "ATHEROS UB93" rev 2.00/1.08 addr 2
athn0: could not load firmware
uhidev0 at uhub3 port 3 configuration 1 interface 0 "Logitech USB
Optical Mouse" rev 2.00/63.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
athn0 detached
athn0 at uhub0 port 4 "ATHEROS UB93" rev 2.00/1.08 addr 2
athn0: could not load firmware
athn0 detached
athn0 at uhub0 port 4 "ATHEROS UB93" rev 2.00/1.08 addr 2
athn0: could not load firmware
athn0 detached
athn0 at uhub0 port 4 "ATHEROS UB93" rev 2.00/1.08 addr 2
athn0: could not load firmware
