Hi I would like to ask, did it work with OpenBSD? On 8 Sep 2013 00:51, "Beavis" <[email protected]> wrote:
> Hello All! > > thanks if there are any people who would reply back. but I was able to get > it to talk > > # cu -l cuaU1 > > > Connected > T > OK > AT > OK > > thanks again. > > -B > > > On Sat, Sep 7, 2013 at 3:33 PM, Beavis <[email protected]> wrote: > > > Hello all, > > > > would like to ask if there is anyone on the list that has tried using ZTE > > 3g Modem on OpenBSD. the kernel (5.1) was able to detect the device: > > > > umsm0 at uhub0 port 1 configuration 1 interface 0 "ZTE,Incorporated ZTE > > CDMA Technologies MSM" rev 2.00/0.00 addr 2 > > umsm0 at uhub0 port 1 configuration 1 interface 0 "ZTE,Incorporated ZTE > > CDMA Technologies MSM" rev 2.00/0.00 addr 2 > > umsm1 at uhub0 port 1 configuration 1 interface 1 "ZTE,Incorporated ZTE > > CDMA Technologies MSM" rev 2.00/0.00 addr 2 > > umass0 at uhub0 port 1 configuration 1 interface 2 "ZTE,Incorporated ZTE > > CDMA Technologies MSM" rev 2.00/0.00 addr 2 > > sd0 at scsibus2 targ 1 lun 0: <ZTE, MMC Storage, 2.31> SCSI2 0/direct > > removable serial.19d20031567890ABCDEF > > umsm2 at uhub0 port 1 configuration 1 interface 3 "ZTE,Incorporated ZTE > > CDMA Technologies MSM" rev 2.00/0.00 addr 2 > > > > there are some ZTE's on the umsm(4) man pages but not specifically MF110. > > i can't seem to make it to talk. > > > > ZTE AC2746 USB > > ZTE MF112 USB > > ZTE MF190 USB > > ZTE MF633 USB > > ZTE MF637 USB > > > > any suggestions or advice is awesomely appreciated. > > > > > > regards, > > -B > > -- > > () ascii ribbon campaign - against html e-mail > > /\ www.asciiribbon.org - against proprietary attachments > > > > Disclaimer: > > http://goldmark.org/jeff/stupid-disclaimers/ > > > > > > -- > () ascii ribbon campaign - against html e-mail > /\ www.asciiribbon.org - against proprietary attachments > > Disclaimer: > http://goldmark.org/jeff/stupid-disclaimers/
