My legacy ThinkPad died so I've resurrected a legacy HP notebook to
replace it for the time being and the built-in ath can't see my 2.4GHz
SSIDs (behavior doesn't change when the SSID's channel changes).
While it does see my 5GHz SSID most of the time, connectivity is very
problematic and, when it eventually connects, there's a lot of packet
loss.  FWIW, the AP is from Ruckus and all my varied wireless devices
connect to it without issue (this AP works better than my previous
Cisco AP, but this is the first time I've installed OpenBSD on this
notebook).

Any thoughts appreciated.  The relevant details are below and the
dmesg contains information from a fresh reboot and nothing else was
done with ath.  In the case below, connectivity to the AP failed to be
established.  I can also provide the debug output when it occasionally
connects (I can see the association and 4-way handshake, but there's
nothing after that and packet loss varies greatly).  c0:8a:de:1e:44:*
is the MAC of the AP.

$ cat hostname.ath0
debug
-powersave
nwid <redacted>
wpakey <redacted>
dhcp

$ cat dmesg.boot
OpenBSD 5.7-beta (GENERIC) #689: Wed Jan 28 15:28:23 MST 2015
    [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1600MHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,EST,TM2,PERF
real mem  = 2146779136 (2047MB)
avail mem = 2099380224 (2002MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 08/30/06, BIOS32 rev. 0 @ 0xf0000, SMBIOS rev.
2.3 @ 0xfa1ee (31 entries)
bios0: vendor Hewlett-Packard version "68BDD Ver. F.15" date 08/30/2006
bios0: Hewlett-Packard HP Compaq nc6000 (DQ880A#ABA)
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT
acpi0: wakeup devices C056(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 1 (C045)
acpiprt1 at acpi0: bus 2 (C056)
acpiprt2 at acpi0: bus 0 (C044)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: C16D, resource for C169
acpipwrres1 at acpi0: C13D, resource for C16E
acpipwrres2 at acpi0: C184, resource for C183
acpipwrres3 at acpi0: C18B, resource for C185
acpipwrres4 at acpi0: C195, resource for C193
acpipwrres5 at acpi0: C0E6, resource for C0AA
acpipwrres6 at acpi0: C20B, resource for C20F
acpipwrres7 at acpi0: C20C, resource for C210
acpipwrres8 at acpi0: C20D, resource for C211
acpipwrres9 at acpi0: C20E, resource for C212
acpitz0 at acpi0: critical temperature is 103 degC
acpitz1 at acpi0: critical temperature is 115 degC
acpitz2 at acpi0: critical temperature is 103 degC
acpibat0 at acpi0: C137 model "Primary" serial 31163 2004/02/06 type
LIon oem "Hewlett-Packard"
acpibat1 at acpi0: C136 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: C139
acpibtn1 at acpi0: C138
acpivideo0 at acpi0: C0CF
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: Enhanced SpeedStep 1595 MHz: speeds: 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xb0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M10" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 10
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci2 at ppb1 bus 2
ath0 at pci2 dev 4 function 0 "Atheros AR5212" rev 0x01: irq 11
ath0: AR5213 5.6 phy 4.1 rf5111 1.7 rf2111 2.3 eeprom 3.4, WOR0W,
address 00:0b:cd:5a:28:bb
cbb0 at pci2 dev 6 function 0 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
cbb1 at pci2 dev 6 function 1 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
"O2 Micro OZ711Mx Misc" rev 0x00 at pci2 dev 6 function 2 not configured
cbb2 at pci2 dev 6 function 3 "O2 Micro OZ711E0 CardBus" rev 0x00: irq 10
bge0 at pci2 dev 14 function 0 "Broadcom BCM5705M Alt" rev 0x03,
BCM5705 A3 (0x3003): irq 11, address 00:08:02:de:d3:2d
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
cardslot2 at cbb2 slot 2 flags 0
cardbus2 at cardslot2: bus 5 device 0 cacheline 0x0, lattimer 0x20
pcmcia2 at cardslot2
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6026GAX>
wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4241N, 0C29> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq
11, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
ugen0 at uhub3 port 1 "ACTIONTEC Bluetooth by hp" rev 1.10/8.02 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (63303724404c933c.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RV350 0x1002:0x4E50 0x103C:0x0890).
radeondrm0: GTT: 256M 0xB0000000 - 0xBFFFFFFF
radeondrm0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (32M used)
drm: Panel ID String: SEC
drm: Panel Size 1024x768
drm: No TV DAC info found in BIOS
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ath0: begin active scan
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 2 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 3 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 4 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 5 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 6 mode 11b
ath0: received beacon from ee:43:f6:78:b6:30 rssi 2 mode 11b
ath0: received beacon from ee:43:f6:78:b6:30 rssi 3 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 7 mode 11b
ath0: received beacon from 5e:f4:ab:24:90:5c rssi 7 mode 11b
ath0: received beacon from 5e:f4:ab:24:90:5c rssi 8 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 8 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 9 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 10 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 17 mode 11b
ath0: received beacon from 00:24:7b:23:a8:aa rssi 15 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 17 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 15 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 18 mode 11b
ath0: received beacon from 00:24:7b:23:a8:aa rssi 17 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 17 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 11 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 17 mode 11b
ath0: received beacon from 00:24:7b:23:a8:aa rssi 16 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 16 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 18 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 16 mode 11b
ath0: received beacon from 00:24:7b:23:a8:aa rssi 17 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 17 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 17 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 12 mode 11b
ath0: received beacon from 00:24:7b:23:a8:aa rssi 18 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 16 mode 11b
ath0: received beacon from 00:24:7b:23:a8:aa rssi 16 mode 11b
ath0: received beacon from 00:00:00:00:00:00 rssi 17 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 13 mode 11b
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 36 mode 11a
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 40 mode 11a
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 44 mode 11a
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 48 mode 11a
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 1 mode 11b
ath0: received beacon from 90:72:40:1a:46:c6 rssi 2 mode 11b
ath0: received beacon from 90:72:40:1a:46:c6 rssi 3 mode 11b
ath0: end active scan
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 36 mode 11a
ath0: received beacon from 90:72:40:1a:46:c6 rssi 5 mode 11a
ath0: received beacon from 90:72:40:1a:46:c6 rssi 2 mode 11a
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 40 mode 11a
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 44 mode 11a
ath0: received probe_resp from c0:8a:de:1e:44:7c rssi 30 mode 11a
ath0: received beacon from c0:8a:de:1e:44:7c rssi 31 mode 11a
ath0: received beacon from c0:8a:de:1e:44:7c rssi 31 mode 11a
ath0: sending probe_req to ff:ff:ff:ff:ff:ff on channel 48 mode 11a
ath0: end active scan
ath0: sending auth to c0:8a:de:1e:44:7c on channel 44 mode 11a
ath0: device timeout

Reply via email to