On 03/04/2015 04:34 AM, Jonathan Gray wrote:
> On Tue, Mar 03, 2015 at 05:39:51PM -0800, Jason Adams wrote:
>> Somewhere along the road of moving from 5.5 to 5.6 (i386) my performance in
>> X has really taken a hit
>> when dragging windows around. The window trails the pointer by several
>> inches. X performance used
>> to be surprisingly good on 5.5.
>>
>> I note the following lines in Xorg.0.log:
>>
>>> [ 56.517] (--) RADEON(0): Chipset: "ATI Radeon Mobility 7000 IGP 4437"
>>> (ChipID = 0x4437)
>>> [ 56.519] (II) RADEON(0): GPU accel disabled or not working, using
>>> shadowfb for KMS
>> fw_update reports no updates, (it does list a couple radeon entries as it
>> checks for firmware).
>>
>> Any clues as to what may be the issue here? Is this fixable?
> A full dmesg and Xorg.0.log would be helpful. If you could try a snapshot
> there are some changes in -current that may be relevant.
>
The dmesg is as follows, and i suspect the Xorg log would be redundant, as
there seems to lines
in the dmesg seem to suggest the problem happens fairly early.
Search for the line: drm: initializing kernel modesetting (RS200 0x1002:0x4437
0x1179:0xFF10)
It all goes gunnysack after that.
Thing is, I don't know what to do about that.
begin paste-----------
OpenBSD 5.6 (GENERIC) #274: Fri Aug 8 00:05:13 MDT 2014
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF
real mem = 1274507264 (1215MB)
avail mem = 1241239552 (1183MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/16/04, BIOS32 rev. 0 @ 0xe9950, SMBIOS
rev. 2.3 @ 0xeb160
(37 entries)
bios0: vendor TOSHIBA version "Version 1.70" date 09/10/2004
bios0: TOSHIBA Satellite A60
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC BOOT SSDT SSDT
acpi0: wakeup devices LID_(S4) USB0(S3) USB1(S3) USB2(S3) MC97(S3) P2P_(S4)
LAN0(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 1 (AGP_)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 2 (P2P_)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1
acpipwrres0 at acpi0: PUT2, resource for PUT2
acpipwrres1 at acpi0: PFA1, resource for FAN1
acpitz0 at acpi0: critical temperature is 105 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "PA3384-BAS/BRS" serial 6B52 type Li-I
bios0: ROM list: 0xc0000/0xf000 0xe0000/0x2000! 0xe6000/0x1000! 0xeb000/0x5000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS250 AGP" rev 0x05
agp at pchb0 not configured
ppb0 at pci0 dev 1 function 0 "ATI RS200 PCI" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 5 function 0 "ATI Radeon Mobility IGP" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 2 int 16
ohci0 at pci0 dev 19 function 0 "ATI SB200 USB" rev 0x01: apic 2 int 19,
version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB200 USB" rev 0x01: apic 2 int 19,
version 1.0, legacy support
ehci0 at pci0 dev 19 function 2 "ATI SB200 USB2" rev 0x01: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SB200 SMBus" rev 0x18: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
pciide0 at pci0 dev 20 function 1 "ATI SB200 IDE" rev 0x00: DMA, channel 0
configured to
compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N030ATMR04-0>
wd0: 16-sector PIO, LBA48, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, UJDA760 DVD/CDRW, 1.50> ATAPI 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pcib0 at pci0 dev 20 function 3 "ATI SB200 ISA" rev 0x00
ppb1 at pci0 dev 20 function 4 "ATI SB200 PCI" rev 0x00
pci2 at ppb1 bus 2
ath0 at pci2 dev 4 function 0 "Atheros AR5212" rev 0x01: apic 2 int 17
ath0: AR5213A 5.9 phy 4.3 rf2112a 4.6 eeprom 4.8, WOR4W, address
00:11:f5:03:c9:a2
cbb0 at pci2 dev 6 function 0 "TI PCI1410 CardBus" rev 0x02: apic 2 int 19,
CardBus support disabled
rl0 at pci2 dev 7 function 0 "Realtek 8139" rev 0x10: apic 2 int 18, address
00:a0:d1:b4:d4:79
rlphy0 at rl0 phy 0: RTL internal PHY
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
auixp0 at pci0 dev 20 function 5 "ATI SB200 AC97" rev 0x00: apic 2 int 17
auixp0: soft resetting aclink
auixp0: not up; resetting aclink hardware
auixp0: not up; resetting aclink hardware
auixp0: aclink hardware reset successful
"ATI SB200 Modem" rev 0x01 at pci0 dev 20 function 6 not configured
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
axe0 at uhub0 port 3 configuration 1 interface 0 "ASIX Electronics AX88772" rev
2.00/0.01 addr 2
axe0: AX88772, address 8c:ae:4c:fe:91:84
ukphy0 at axe0 phy 16: Generic IEEE 802.3u media interface, rev. 1: OUI
0x000ec6, model 0x0006
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Microsoft IntelliMouse"
rev 1.00/1.05 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (52d4df2604d79619.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RS200 0x1002:0x4437 0x1179:0xFF10).
error: [drm:pid0:radeon_agp_init] *ERROR* Unable to acquire AGP: 22
drm: Forcing AGP to PCI mode
radeondrm0: VRAM: 64M 0x000000004C000000 - 0x000000004FFFFFFF (64M used)
radeondrm0: GTT: 512M 0x0000000050000000 - 0x000000006FFFFFFF
drm: PCI GART of 512M enabled (table at 0x0000000002204000).
error: [drm:pid0:r100_ring_test] *ERROR* radeon: ring test failed
(scratch(0x15E4)=0xCAFEDEAD)
error: [drm:pid0:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
error: [drm:pid0:r100_startup] *ERROR* failed initializing CP (-22).
error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration
error: [drm:pid0:r100_cp_fini] *ERROR* Wait for CP idle timeout, shutting down
CP.
drm: radeon: cp finalized
drm: Panel ID String: LGP
drm: Panel Size 1024x768
drm: No TV DAC info found in BIOS
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
ac97: codec id 0x414c4752 (Avance Logic ALC250A?)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auixp0
--
Those who do not understand Unix are condemned to reinvent it, poorly.
