Hi Darren, thanks for the info. I tried down-/uploading directly to/from the ALIX w/o any switch or other clients connected. But to be honest, i'm not sure if vr1 connected to the modem was set to sth strange.
VDSL modem - ALIX(vr1) (no clients connected for testing purposes) Unfortunately this has been a customers setup and meanwhile we switched to APU 1D4 which works fine except you can certainly fry an egg on the bottom. If all goes well, i can switch to VDSL 50mbit in the next 12 months so i'll give the ALIX a shot then and report @misc. Thanks, -Mark On Mon, Mar 09, 2015 at 04:26:32PM -0400, Darren Tucker wrote: > On Fri, Oct 10, 2014 at 6:23 AM, Mark Patruck <m...@wrapped.cx> wrote: > > > I'm running 5.6-current on a Alix 2c3. The box is connected > > via pppoe(4) and VDSL 50Mbit down/10Mbit up - max-mss is set > > to 1440. > > > > Running a few speed tests, i get almost always > 50.000kbit/s > > down, but not more than 400-600kbit/s up. > > > > I just found this message looking for something else but it reminded me of > something I found with my ALIX recently: for some reason it had > autonegotiated with the (dlink) switch as half-duplex while the switch > thought it was full. Nailing the speed to 100/full in the hostname.vr? > files resulted in the speed going back up to what I expected (about 85 > mbit/s). If you are still having problems you might want to check that out. > > -- > Darren Tucker (dtucker at zip.com.au) > GPG key 8FF4FA69 / D9A3 86E9 7EEE AF4B B2D4 37C9 C982 80C7 8FF4 FA69 > Good judgement comes with experience. Unfortunately, the experience > usually comes from bad judgement. -- Mark Patruck ( mark at wrapped.cx ) GPG key 0xF2865E51 / 187F F6D3 EE04 1DCE 1C74 F644 0D3C F66F F286 5E51 http://www.wrapped.cx