On Sat, Dec 17, 2005 at 02:23:00AM -0600, Bart Kus wrote: > Hello, > > I believe this report is related to the one archived on: > > http://marc.theaimsgroup.com/?l=openbsd-misc&m=113292366519249&w=2 > > Where Robert Stepanek reports an issue with 11ag modes. However, my > report is limited to 11g by itself, since I cannot verify the 11a mode. > > The issue is simple. I configure the Wistron NeWeb CM9 card for 11b mode > in hostap, and NetStumbler picks it up just fine. I can connect, pass > data, all that good stuff. > > The instant that I switch it to 11g mode (be it live or after a fresh > reboot's initial config) the AP goes off the air (or doesn't get on the > air in the case of fresh boot). > > I'm using the OBSD 3.8 WRAP image available at: > > http://www.yawarra.com.au/sw-osimages.php > > Can anyone with CM9 hardware duplicate or refute this claim?
11g modes are not yet supported on ath, 11b or 11a only iirc.
