Does not work with static address either - although it answers it's own ping but does not communicate with other systems on the net, nor answer an arping.
Booted up a live Fedora to test hardware and it works fine. On Tue, May 26, 2015 at 2:30 PM, Sonic <[email protected]> wrote: > Just installed the 5-25-15 snapshot on a Supermicro server with an > X10SLL-F board. The board has two Ethernet ports, one i210-AT and one > i217-LM. The i217-LM does not accept the offers from the DHCP server. > I also was not prompted to set the up the i217-LM (em0) when > installing the OS. > > The DHCP server (an OpenBSD -current box) logs a series of: > ================================================ > DHCPDISCOVER from 00:25:90:47:9e:75 via em0 > DHCPOFFER on 172.27.12.243 to 00:25:90:47:9e:75 via em0 > ================================================ > > Upgraded to a -current kernel, same issue (building userland now). > > dmesg: > ================================================ > OpenBSD 5.7-current (GENERIC.MP) #0: Tue May 26 13:43:19 EDT 2015 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 17121247232 (16328MB) > avail mem = 16598519808 (15829MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec170 (80 entries) > bios0: vendor American Megatrends Inc. version "3.0" date 04/24/2015 > bios0: Supermicro X10SLL-F > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S4 S5 > acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT SSDT SSDT MCFG > HPET SSDT SSDT SPMI > acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) > PEG2(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) > RP03(S4) PXSX(S4) RP05(S4) GLAN(S4) EHC1(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz, 3600.52 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM > ,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 100MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz, 3600.00 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM > ,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES, > XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG0) > acpiprt2 at acpi0: bus -1 (PEG1) > acpiprt3 at acpi0: bus -1 (PEG2) > acpiprt4 at acpi0: bus 1 (RP01) > acpiprt5 at acpi0: bus 3 (RP02) > acpiprt6 at acpi0: bus -1 (RP03) > acpiprt7 at acpi0: bus -1 (RP05) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C1, PSS > acpicpu1 at acpi0: C1, PSS > acpipwrres0 at acpi0: PG00, resource for PEG0 > acpipwrres1 at acpi0: PG01, resource for PEG1 > acpipwrres2 at acpi0: PG02, resource for PEG2 > acpipwrres3 at acpi0: FN00, resource for FAN0 > acpipwrres4 at acpi0: FN01, resource for FAN1 > acpipwrres5 at acpi0: FN02, resource for FAN2 > acpipwrres6 at acpi0: FN03, resource for FAN3 > acpipwrres7 at acpi0: FN04, resource for FAN4 > acpitz0 at acpi0: critical temperature is 105 degC > acpitz1 at acpi0: critical temperature is 105 degC > acpibat0 at acpi0: BAT0 not present > acpibat1 at acpi0: BAT1 not present > acpibat2 at acpi0: BAT2 not present > acpibtn0 at acpi0: LID0 > acpibtn1 at acpi0: SLPB > acpibtn2 at acpi0: PWRB > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > ipmi at mainbus0 not configured > cpu0: Enhanced SpeedStep 3600 MHz: speeds: 3600, 3400, 3200, 3000, > 2900, 2700, 2500, 2300, 2100, 1900, 1700, 1500, 1400, > 1200, 1000, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x06 > xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x05: msi > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 > em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x05: msi, address > 00:25:90:47:9e:75 > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 16 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd5: msi > pci1 at ppb0 bus 1 > ppb1 at pci1 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03 > pci2 at ppb1 bus 2 > vga1 at pci2 dev 0 function 0 "ASPEED Technology AST2000" rev 0x30 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > ppb2 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd5: msi > pci3 at ppb2 bus 3 > em1 at pci3 dev 0 function 0 "Intel I210" rev 0x03: msi, address > 00:25:90:47:9e:74 > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x05: apic 8 int 22 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel C222 LPC" rev 0x05 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x05: msi, AHCI 1.3 > ahci0: port 0: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSA2M080, 2CV1> SCSI3 > 0/direct fixed naa.5001517959326c99 > sd0: 76319MB, 512 bytes/sector, 156301488 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x05: apic 8 int > 18 > iic0 at ichiic0 > sdtemp0 at iic0 addr 0x18: stts2002 > sdtemp1 at iic0 addr 0x1a: stts2002 > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > "Intel 8 Series Thermal" rev 0x05 at pci0 dev 31 function 6 not configured > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > uhub3 at uhub0 port 3 "vendor 0x0000 product 0x0001" rev 2.00/0.00 addr 2 > uhidev0 at uhub3 port 1 configuration 1 interface 0 "ATEN > International product 0x2419" rev 1.10/1.00 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd0 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub3 port 1 configuration 1 interface 1 "ATEN > International product 0x2419" rev 1.10/1.00 addr 3 > uhidev1: iclass 3/1 > ums0 at uhidev1: 3 buttons, Z dir > wsmouse0 at ums0 mux 0 > uhidev2 at uhub0 port 5 configuration 1 interface 0 "Logitech USB > Receiver" rev 2.00/12.01 addr 4 > uhidev2: iclass 3/1 > ukbd1 at uhidev2: 8 variable keys, 6 key codes > wskbd1 at ukbd1 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev3 at uhub0 port 5 configuration 1 interface 1 "Logitech USB > Receiver" rev 2.00/12.01 addr 4 > uhidev3: iclass 3/1, 8 report ids > ums1 at uhidev3 reportid 2: 16 buttons, Z dir > wsmouse1 at ums1 mux 0 > uhid0 at uhidev3 reportid 3: input=4, output=0, feature=0 > uhid1 at uhidev3 reportid 4: input=1, output=0, feature=0 > uhid2 at uhidev3 reportid 8: input=1, output=0, feature=0 > uhidev4 at uhub0 port 5 configuration 1 interface 2 "Logitech USB > Receiver" rev 2.00/12.01 addr 4 > uhidev4: iclass 3/0, 33 report ids > uhid3 at uhidev4 reportid 16: input=6, output=6, feature=0 > uhid4 at uhidev4 reportid 17: input=19, output=19, feature=0 > uhid5 at uhidev4 reportid 32: input=14, output=14, feature=0 > uhid6 at uhidev4 reportid 33: input=31, output=31, feature=0 > uhub4 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 > uhub5 at uhub2 port 1 "Intel Rate Matching Hub" rev 2.00/0.05 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (05419a822a662803.a) swap on sd0b dump on sd0b > ================================================ > > Haven't tried to see if a static address works yet. > > Thanks, > > Chris
