Hello. I'm trying to install openbsd 5.7 on a soekris board. I've
booted on pxeboot file from 5.7/amd64, with bsd.rd from 5.7/amd64 ; but
install(8) stops on fdisk step, returning back to the start of process
I've tried i386 and got the same results
The session folows :
Intel(R) Boot Agent GE v1.3.72
Copyright (C) 1997-2010, Intel Corporation
CLIENT MAC ADDR: 00 00 24 D1 42 0C
CLIENT IP: 10.42.42.44 MASK: 255.255.255.0 DHCP IP: 10.42.42.1
GATEWAY IP: 10.42.42.1
probing: pc0 com0 pxe![2.1] mem[620K 510M a20=on]
disk: hd0+*
net: mac 00:00:24:d1:42:0c, ip 10.42.42.44, server 10.42.42.21
>> OpenBSD/amd64 PXEBOOT 3.23
switching console to com0
>> OpenBSD/amd64 PXEBOOT 3.23
cannot open tftp:/etc/random.seed: No such file or directory
booting tftp:/bsd.rd: 3220112+1373792+2401280+0+520192
[97+355440+231981]=0x7bca08
entry point at 0x1000160 [7205c766, 34000004, 24448b12, f680a304]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.7 (RAMDISK_CD) #806: Sun Mar 8 11:08:49 MDT 2015
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_C
D
real mem = 519962624 (495MB)
avail mem = 504487936 (481MB)
mainbus0 at root
bios0 at mainbus0
acpi at bios0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Genuine Intel(R) CPU @ 600MHz, 600.09 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-
CPL,VMX,E
ST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu at mainbus0: not configured
mpbios0: bus 0 is type PCI
mpbios0: bus 64 is type ISA
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x4115
rev 0x05
pchb1 at pci0 dev 1 function 0 "Intel E600 Config" rev 0x00
ppb0 at pci0 dev 23 function 0 "Intel E600 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel EG20T PCIE" rev 0x01
pci2 at ppb1 bus 2
"Intel EG20T Packet Hub" rev 0x01 at pci2 dev 0 function 0 not
configured
"Intel EG20T Ethernet" rev 0x02 at pci2 dev 0 function 1 not configured
"Intel EG20T GPIO" rev 0x01 at pci2 dev 0 function 2 not configured
ohci0 at pci2 dev 2 function 0 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ohci1 at pci2 dev 2 function 1 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ohci2 at pci2 dev 2 function 2 "Intel EG20T USB" rev 0x02: apic 0 int
19, version 1.0
ehci0 at pci2 dev 2 function 3 "Intel EG20T USB" rev 0x02: apic 0 int
19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T USB Client" rev 0x02 at pci2 dev 2 function 4 not
configured
sdhc0 at pci2 dev 4 function 0 "Intel EG20T SDIO" rev 0x01: apic 0 int
18
sdmmc0 at sdhc0
sdhc1 at pci2 dev 4 function 1 "Intel EG20T SDIO" rev 0x01: apic 0 int
18
sdmmc1 at sdhc1
ahci0 at pci2 dev 6 function 0 "Intel EG20T AHCI" rev 0x02: msi, AHCI
1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, KINGSTON SMS200S, 600A> SCSI3
0/direct fixed naa.50026b7253081a83
sd0: 28626MB, 512 bytes/sector, 58626288 sectors, thin
ohci3 at pci2 dev 8 function 0 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ohci4 at pci2 dev 8 function 1 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ohci5 at pci2 dev 8 function 2 "Intel EG20T USB" rev 0x02: apic 0 int
16, version 1.0
ehci1 at pci2 dev 8 function 3 "Intel EG20T USB" rev 0x02: apic 0 int
16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T DMA" rev 0x00 at pci2 dev 10 function 0 not configured
"Intel EG20T Serial" rev 0x01 at pci2 dev 10 function 1 not configured
"Intel EG20T Serial" rev 0x00 at pci2 dev 10 function 2 not configured
"Intel EG20T Serial" rev 0x00 at pci2 dev 10 function 3 not configured
"Intel EG20T Serial" rev 0x00 at pci2 dev 10 function 4 not configured
"Intel EG20T DMA" rev 0x00 at pci2 dev 12 function 0 not configured
"Intel EG20T SPI" rev 0x00 at pci2 dev 12 function 1 not configured
"Intel EG20T I2C" rev 0x00 at pci2 dev 12 function 2 not configured
"Intel EG20T CAN" rev 0x00 at pci2 dev 12 function 3 not configured
"Intel EG20T 1588" rev 0x01 at pci2 dev 12 function 4 not configured
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb7 at ohci5: USB revision 1.0
uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
ppb2 at pci0 dev 24 function 0 "Intel E600 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:42:0c
ppb5 at pci4 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:42:0d
ppb6 at pci4 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci7 at ppb6 bus 7
ppb7 at pci0 dev 25 function 0 "Intel E600 PCIE" rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci10 at ppb9 bus 10
em2 at pci10 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:42:0e
ppb10 at pci9 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci11 at ppb10 bus 11
em3 at pci11 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:42:0f
ppb11 at pci9 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci12 at ppb11 bus 12
ppb12 at pci0 dev 26 function 0 "Intel E600 PCIE" rev 0x00
pci13 at ppb12 bus 13
ppb13 at pci13 dev 0 function 0 "IDT 89HPES5T5ZB" rev 0x0e
pci14 at ppb13 bus 14
ppb14 at pci14 dev 2 function 0 "IDT 89HPES5T5ZB" rev 0x0e
pci15 at ppb14 bus 15
em4 at pci15 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:73:f8
ppb15 at pci14 dev 3 function 0 "IDT 89HPES5T5ZB" rev 0x0e
pci16 at ppb15 bus 16
em5 at pci16 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:73:f9
ppb16 at pci14 dev 4 function 0 "IDT 89HPES5T5ZB" rev 0x0e
pci17 at ppb16 bus 17
em6 at pci17 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:73:fa
ppb17 at pci14 dev 5 function 0 "IDT 89HPES5T5ZB" rev 0x0e
pci18 at ppb17 bus 18
em7 at pci18 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:00:24:d1:73:fb
"Intel E600 LPC" rev 0x00 at pci0 dev 31 function 0 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
com0: console
softraid0 at root
scsibus1 at softraid0: 256 targets
PXE boot MAC address 00:00:24:d1:42:0c, interface em0
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 5.7 installation program.
Starting non-interactive mode in 5 seconds...
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
DHCPDISCOVER on em0 - interval 3
DHCPOFFER from 10.42.42.1 (00:00:24:cf:42:ae)
DHCPREQUEST on em0 to 255.255.255.255
DHCPACK from 10.42.42.1 (00:00:24:cf:42:ae)
bound to 10.42.42.44 -- renewal in 21600 seconds.
Could not determine auto mode.
Response file location? [http://10.42.42.21/install.conf]
Fetching http://10.42.42.21/install.conf
No response file found; non-interactive mode aborted.
# install
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') fremen
Available network interfaces are: em0 em1 em2 em3 em4 em5 em6 em7
vlan0.
Which network interface do you wish to configure? (or 'done') [em0]
IPv4 address for em0? (or 'dhcp' or 'none') [dhcp]
DHCPREQUEST on em0 to 255.255.255.255
DHCPACK from 10.42.42.1 (00:00:24:cf:42:ae)
bound to 10.42.42.44 -- renewal in 21600 seconds.
IPv6 address for em0? (or 'rtsol' or 'none') [none]
Available network interfaces are: em0 em1 em2 em3 em4 em5 em6 em7
vlan0.
Which network interface do you wish to configure? (or 'done') [done]
Using DNS domainname geekwu.org
Using DNS nameservers at 10.42.7.6 10.42.42.126 10.42.0.254
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Start ntpd(8) by default? [no]
Change the default console to com0? [yes]
Available speeds are: 9600 19200 38400 57600 115200.
Which speed should com0 use? (or 'done') [57600]
Setup a user? (enter a lower-case loginname, or 'no') [no]
What timezone are you in? ('?' for list) [Europe/Paris]
Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0]
Use DUIDs rather than device names in fstab? [yes]
Disk: sd0 geometry: 3649/255/63 [58626288 Sectors]
Offset: 0 Signature: 0xAA55
Starting
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 5.7 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
If I try to restart install, I get struck at the same step.
fdisk ran from console exists with code 130:
# fdisk sd0
Disk: sd0 geometry: 3649/255/63 [58626288 Sectors]
Offset: 0 Signature: 0xAA55
Starting #
# echo "$?"
130
Is there a way to find from where the error comes ?
Thanks,
--
Bastien
