Hi,
on my HP laptop (dmesg below) I notice that both with acpi and with apm,
it is always reported that the power adapter is connected, even if it is
not. The power level of the battery seems reasonable.
With power cord attached:
hw.sensors.acpitz0.temp0=56.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=14.80 VDC (voltage)
hw.sensors.acpibat0.volt1=12.48 VDC (current voltage)
hw.sensors.acpibat0.current0=unknown (rate), UNKNOWN
hw.sensors.acpibat0.amphour0=4.10 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.21 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.12 Ah (low capacity)
hw.sensors.acpibat0.amphour3=4.10 Ah (remaining capacity), OK
hw.sensors.acpibat0.amphour4=6.00 Ah (design capacity)
hw.sensors.acpibat0.raw0=0 (battery full), OK
hw.sensors.acpibtn2.indicator0=On (lid open)
Without:
hw.sensors.acpitz0.temp0=56.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibat0.volt0=14.80 VDC (voltage)
hw.sensors.acpibat0.volt1=11.84 VDC (current voltage)
hw.sensors.acpibat0.current0=unknown (rate), UNKNOWN
hw.sensors.acpibat0.amphour0=4.10 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.21 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.12 Ah (low capacity)
hw.sensors.acpibat0.amphour3=4.00 Ah (remaining capacity), OK
hw.sensors.acpibat0.amphour4=6.00 Ah (design capacity)
hw.sensors.acpibat0.raw0=1 (battery discharging), OK
hw.sensors.acpibtn2.indicator0=On (lid open)
acpiac0 seems wrong to me.
Riccardo
OpenBSD 5.7 (GENERIC.MP) #881: Sun Mar 8 11:04:17 MDT 2015
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2129461248 (2030MB)
avail mem = 2068914176 (1973MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (19 entries)
bios0: vendor Hewlett-Packard version "F.58" date 06/16/2008
bios0: Hewlett-Packard HP Pavilion dv6500 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG TMOR APIC BOOT SLIC SSDT SSDT SSDT SSDT
acpi0: wakeup devices PWRB(S4) PXSX(S3) PXSX(S4) PS2K(S3) PS2M(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz, 2394.68 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz, 2194.75 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu1: 4MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 4 (RP02)
acpiprt4 at acpi0: bus 8 (RP06)
acpiprt5 at acpi0: bus 9 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0acpitz0: THR1: failed to read _CRT
acpitz0: THR1: failed to read _CRT
: no critical temperature defined
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "Primary" serial type LION oem
"Hewlett-Packard"
acpibtn2 at acpi0: LID_
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: GFX0
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2201, 2200, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
ppb0 at pci0 dev 1 function 0 "Intel GM965 PCIE" rev 0x0c: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8400M GS" rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 2 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: msi
azalia0: codecs: Realtek ALC268, Motorola/0x3055, using Realtek ALC268
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: msi
pci2 at ppb1 bus 2
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
msi, MoW2, address 00:1c:bf:0d:dc:cc
ppb2 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: msi
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x03: msi
pci4 at ppb3 bus 8
re0 at pci4 dev 0 function 0 "Realtek 8101E" rev 0x01: RTL8101E
(0x3400), msi, address 00:1b:24:b9:4d:0f
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 2 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 2 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci5 at ppb4 bus 9
"Ricoh 5C832 Firewire" rev 0x05 at pci5 dev 9 function 0 not configured
sdhc0 at pci5 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x22: apic 2 int 21
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x12 at pci5 dev 9 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x12 at pci5 dev 9 function 3 not configured
"Ricoh 5C852 xD" rev 0x12 at pci5 dev 9 function 4 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PIONEER, DVDRW DVR-K17B, 1.02> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: msi,
AHCI 1.1
ahci0: PHY offline on port 1
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, WDC WD2500BEVS-6, 01.0> SCSI3
0/direct fixed naa.50014ee2ab4625a6
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 2
int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.3
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uvideo0 at uhub1 port 4 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. HP Webcam" rev 2.00/6.06 addr 2
video0 at uvideo0
ugen0 at uhub5 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (255b4caf4f8b1563.a) swap on sd0b dump on sd0b
