Hello,
after upgrading to snapshot from june 29th on my sun blade 100 (sparc64)
X fails to start.
...
[ 39.465] (II) MACH64: Driver for ATI Mach64 chipsets
[ 39.470] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 39.472] (**) MACH64(0): Depth 24, (--) framebuffer bpp 32
[ 39.479] (**) MACH64(0): Option "reference_clock" "29.5MHz"
[ 39.479] (==) MACH64(0): Using EXA acceleration architecture
[ 39.481] (EE) Unable to map mmio aperture. Invalid argument (22)
[ 39.481] (WW) MACH64: Mach64 in slot 0:19:0 could not be detected!
[ 39.487] (II) UnloadModule: "mach64"
[ 39.487] (EE) Screen(s) found, but none have a usable configuration.
snapshot from june 26th/27th worked.
dmesg, Xorg.0.log and xorg.conf attached below
sysctl.conf:
machdep.allowaperture=1
Regards,
Markus
console is keyboard/display
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8-beta (GENERIC) #603: Mon Jun 29 09:07:15 MDT 2015
[email protected]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 511508480 (487MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Blade 100 (UltraSPARC-IIe)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 502 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64
b/l)
psycho0 at mainbus0: pci108e,a001, impl 0, version 0, ign 7c0
psycho0: bus range 0-1, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ebus0 at pci0 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
"dma" at ebus1 addr 0-ffff ivec 0x2a not configured
power0 at ebus1 addr 800-82f ivec 0x20
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
gem0 at pci0 dev 12 function 1 "Sun ERI Ether" rev 0x01: ivec 0x7c6, address
00:03:ba:18:3a:e9
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI
0x0010dd, model 0x0002
"Sun FireWire" rev 0x01 at pci0 dev 12 function 2 not configured
ohci0 at pci0 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0,
legacy support
alipm0 at pci0 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 223KHz clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
"scm001" at alipm0 addr 0x20 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x50: 512MB SDRAM ECC PC133CL2
autri0 at pci0 dev 8 function 0 "Acer Labs M5451 Audio" rev 0x01: ivec 0x7e3
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at autri0
midi0 at autri0: <4DWAVE MIDI UART>
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc3: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3120213A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITEON, CD-ROM LTN486S, Y3S2> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <WDC WD1600AAJB-00J3A0>
wd1: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ppb0 at pci0 dev 5 function 0 "Intel S21152BB" rev 0x00
pci1 at ppb0 bus 1
rl0 at pci1 dev 2 function 0 "D-Link DFE-530TX+" rev 0x10: ivec 0x7d5, address
00:11:95:21:ec:70
rlphy0 at rl0 phy 0: RTL internal PHY
machfb0 at pci0 dev 19 function 0 "ATI Rage XL" rev 0x27
machfb0: ATY,RageXL, 800x600
wsdisplay0 at machfb0 mux 1: console (std, sun emulation)
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Fujitsu Component Type 6
Keyboard" rev 1.00/1.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Logitech USB-PS/2 Optical
Mouse" rev 2.00/20.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@1f,0/ide@d,0/disk@0,0
root on wd0a (a3fcc6617d442473.a) swap on wd0b dump on wd0b
[ 38.327] (--) Using wscons driver
[ 38.472]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 38.472] X Protocol Version 11, Revision 0
[ 38.472] Build Operating System: OpenBSD 5.8 sparc64
[ 38.473] Current Operating System: OpenBSD fuseki.my.domain 5.8 GENERIC#603
sparc64
[ 38.477] Build Date: 29 June 2015 11:42:56AM
[ 38.477]
[ 38.477] Current version of pixman: 0.32.6
[ 38.477] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 38.477] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 38.480] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 30 21:12:02
2015
[ 38.525] (==) Using config file: "/etc/X11/xorg.conf"
[ 38.525] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 38.570] (==) ServerLayout "X.org Configured"
[ 38.570] (**) |-->Screen "Screen0" (0)
[ 38.570] (**) | |-->Monitor "Monitor0"
[ 38.575] (**) | |-->Device "Card0"
[ 38.589] (**) |-->Input Device "Mouse0"
[ 38.589] (**) |-->Input Device "Keyboard0"
[ 38.591] (**) Option "AutoAddDevices" "False"
[ 38.591] (**) Option "UseSIGIO" "false"
[ 38.591] (**) Disabling SIGIO handlers for input devices
[ 38.591] (**) Not automatically adding devices
[ 38.591] (==) Automatically enabling devices
[ 38.591] (==) Not automatically adding GPU devices
[ 38.765] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 38.765] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 38.774] (II) Loader magic: 0x9e5aa879f8
[ 38.774] (II) Module ABI versions:
[ 38.775] X.Org ANSI C Emulation: 0.4
[ 38.775] X.Org Video Driver: 18.0
[ 38.775] X.Org XInput driver : 21.0
[ 38.775] X.Org Server Extension : 8.0
[ 38.807] (--) PCI:*(0:0:19:0) 1002:4752:0000:0000 rev 39, Mem @
0x04000000/16777216, 0x00426000/4096, I/O @ 0x00000b00/256, BIOS @
0x????????/131072
[ 38.809] (II) LoadModule: "glx"
[ 38.847] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 39.389] (II) Module glx: vendor="X.Org Foundation"
[ 39.389] compiled for 1.16.4, module version = 1.0.0
[ 39.389] ABI class: X.Org Server Extension, version 8.0
[ 39.390] (==) AIGLX enabled
[ 39.391] (II) LoadModule: "mach64"
[ 39.392] (II) Loading /usr/X11R6/lib/modules/drivers/mach64_drv.so
[ 39.412] (II) Module mach64: vendor="X.Org Foundation"
[ 39.412] compiled for 1.16.4, module version = 6.9.5
[ 39.412] Module class: X.Org Video Driver
[ 39.412] ABI class: X.Org Video Driver, version 18.0
[ 39.420] (II) LoadModule: "mouse"
[ 39.436] (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
[ 39.450] (II) Module mouse: vendor="X.Org Foundation"
[ 39.450] compiled for 1.16.4, module version = 1.9.1
[ 39.450] Module class: X.Org XInput Driver
[ 39.450] ABI class: X.Org XInput driver, version 21.0
[ 39.452] (II) LoadModule: "kbd"
[ 39.457] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[ 39.465] (II) Module kbd: vendor="X.Org Foundation"
[ 39.465] compiled for 1.16.4, module version = 1.8.0
[ 39.465] Module class: X.Org XInput Driver
[ 39.465] ABI class: X.Org XInput driver, version 21.0
[ 39.465] (II) MACH64: Driver for ATI Mach64 chipsets
[ 39.470] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 39.472] (**) MACH64(0): Depth 24, (--) framebuffer bpp 32
[ 39.479] (**) MACH64(0): Option "reference_clock" "29.5MHz"
[ 39.479] (==) MACH64(0): Using EXA acceleration architecture
[ 39.481] (EE) Unable to map mmio aperture. Invalid argument (22)
[ 39.481] (WW) MACH64: Mach64 in slot 0:19:0 could not be detected!
[ 39.487] (II) UnloadModule: "mach64"
[ 39.487] (EE) Screen(s) found, but none have a usable configuration.
[ 39.487] (EE)
Fatal server error:
[ 39.487] (EE) no screens found(EE)
[ 39.488] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 39.488] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
additional information.
[ 39.488] (EE)
[ 39.497] (EE) Server terminated with error (1). Closing log file.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# following test is a test for kettenis@
# Message-Id: <[email protected]>
Section "ServerFlags"
Option "UseSIGIO" "false"
Option "AutoAddDevices" "False"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "Protocol" "wskbd"
Option "Device" "/dev/wskbd0"
Option "XKbdRules" "xorg"
Option "XkbdLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "wsmouse"
Option "Device" "/dev/wsmouse0"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "LG"
ModelName "Flatron L1953T"
#HorizSync 40-60
#VertRefresh 50-70
VertRefresh 56.0 - 75.0
HorizSync 30.0 - 83.0
#DisplaySize 360 270
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "probe_sparse" # [<bool>]
#Option "accel" # [<bool>]
#Option "crt_display" # [<bool>]
#Option "composite_sync" # [<bool>]
#Option "hw_cursor" # [<bool>]
#Option "force_pci_mode" # [<bool>]
#Option "dma_mode" # <str>
#Option "agp_mode" # <i>
#Option "agp_size" # <i>
#Option "local_textures" # [<bool>]
#Option "buffer_size" # <i>
#Option "mmio_cache" # [<bool>]
#Option "test_mmio_cache" # [<bool>]
#Option "panel_display" # [<bool>]
#Option "reference_clock" # <freq>
#Option "shadow_fb" # [<bool>]
#Option "sw_cursor" # [<bool>]
#Option "AccelMethod" # <str>
#Option "RenderAccel" # [<bool>]
Identifier "Card0"
Driver "mach64"
VendorName "ATI"
BoardName "Rage XL"
#ChipSet "ati"
ChipId 0x4752
ChipRev 0x27
BusID "PCI:0:19:0"
Option "reference_clock" "29.5MHz"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
#Virtual 1600 1200
Depth 24
#Modes "1600x1200"
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
