p.s., and evidently, after the sleep/wake, the laptop does not care to shutdown, neither by reboot(8) nor the power-button press (requires 10s hold of the power-button).
On 7/2/15, patrick keshishian <[email protected]> wrote: > Just noticed this issue with: > > OpenBSD 5.8-beta (GENERIC) #1050: Tue Jun 30 11:10:13 MDT 2015 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC > > After a sleep/wake cycle I noticed that key-repeat stopped working. > > Running top(1) I see that the display isn't being updated, requiring > pressing the space-bar to force an update. > > Last snapshot on this laptop without any major issues was: > > OpenBSD 5.7-current (GENERIC) #973: Tue Jun 2 09:37:26 MDT 2015 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC > > One change was I installed a new 9-Cell battery on this laptop. > > Ideas? > > I'll try a new snap in a few days. > > --patrick > > > dmesg diff: > > --- dmesg.boot-snap-20150602 Wed Jun 3 20:38:38 2015 > +++ dmesg.boot-snap-20150630 Thu Jul 2 11:29:46 2015 > @@ -1,7 +1,7 @@ > -OpenBSD 5.7-current (GENERIC) #973: Tue Jun 2 09:37:26 MDT 2015 > +OpenBSD 5.8-beta (GENERIC) #1050: Tue Jun 30 11:10:13 MDT 2015 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 1861025792 (1774MB) > -avail mem = 1800888320 (1717MB) > +avail mem = 1800855552 (1717MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > @@ -15,7 +15,7 @@ acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI( > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > -cpu0: AMD Athlon(tm) Processor L110, 1197.21 MHz > +cpu0: AMD Athlon(tm) Processor L110, 1197.19 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,SVM,EAPICSP,AMCR8,3DNOWP > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully > associative > @@ -34,10 +34,10 @@ acpiprt5 at acpi0: bus -1 (PB7_) > acpiprt6 at acpi0: bus 9 (P2P_) > acpiprt7 at acpi0: bus 1 (AGP_) > acpiec0 at acpi0 > -acpicpu0 at acpi0: C3, C2 > +acpicpu0 at acpi0: C3(@83 io@0x8015), C2(@18 io@0x8014) > acpitz0 at acpi0: critical temperature is 100 degC > acpiac0 at acpi0: AC unit online > -acpibat0 at acpi0: BAT1 model "UM09A41" serial 22962 type LION oem "SONY" > +acpibat0 at acpi0: BAT1 model "UM09A41" serial 14 type LION oem "SONY" > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibtn2 at acpi0: PWRB > > > Full dmesg: > > OpenBSD 5.8-beta (GENERIC) #1050: Tue Jun 30 11:10:13 MDT 2015 > [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 1861025792 (1774MB) > avail mem = 1800855552 (1717MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf1010 (17 entries) > bios0: vendor Phoenix Technologies LTD version "v1.3307" date 05/31/2010 > bios0: Gateway LT31 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP APIC MCFG HPET BOOT SLIC > acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI(S3) HDAU(S3) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Athlon(tm) Processor L110, 1197.19 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,SVM,EAPICSP,AMCR8,3DNOWP > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully > associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully > associative > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 199MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-8 > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PB3_) > acpiprt2 at acpi0: bus -1 (PB4_) > acpiprt3 at acpi0: bus 3 (PB5_) > acpiprt4 at acpi0: bus 4 (PB6_) > acpiprt5 at acpi0: bus -1 (PB7_) > acpiprt6 at acpi0: bus 9 (P2P_) > acpiprt7 at acpi0: bus 1 (AGP_) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3(@83 io@0x8015), C2(@18 io@0x8014) > acpitz0 at acpi0: critical temperature is 100 degC > acpiac0 at acpi0: AC unit online > acpibat0 at acpi0: BAT1 model "UM09A41" serial 14 type LION oem "SONY" > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibtn2 at acpi0: PWRB > acpivideo0 at acpi0: VGA_ > acpivout0 at acpivideo0: LCD_ > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00 > ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00 > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 5 function 0 "ATI Radeon X1250 IGP" rev 0x00 > drm0 at radeondrm0 > radeondrm0: msi > ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00: msi > pci2 at ppb1 bus 3 > re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL > (0x2480), msi, address 00:23:8b:ef:11:11 > rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1 > ppb2 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00: msi > pci3 at ppb2 bus 4 > ral0 at pci3 dev 0 function 0 "Ralink RT3090" rev 0x00: apic 1 int 18, > address 00:24:1d:f4:11:11 > ral0: MAC/BBP RT3071 (rev 0x0213), RF RT3020 (MIMO 1T1R) > ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int > 22, AHCI 1.1 > ahci0: port 0: 3.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS545050A7, GG2O> SCSI3 > 0/direct fixed naa.5000cca71eed589f > sd0: 476940MB, 512 bytes/sector, 976773168 sectors > ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int > 16, version 1.0, legacy support > ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int > 17, version 1.0, legacy support > ohci2 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int > 17, version 1.0, legacy support > ohci3 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int > 18, version 1.0, legacy support > ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI > iic0 at piixpm0 > spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM > pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 1 int > 16 > azalia0: codecs: Realtek ALC272 > audio0 at azalia0 > pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00 > ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > pci4 at ppb3 bus 9 > pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: > core rev DH-G2 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci3: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > pms0: Synaptics touchpad, firmware 7.2 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony > Electronics Co., Ltd. CNF9011" rev 2.00/13.57 addr 2 > video0 at uvideo0 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (c6730199949bc08f.a) swap on sd0b dump on sd0b > radeondrm0: 1366x768 > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using > wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation)
