updates: 1 - plugging in a usb-kybd/mouse and all works just fine... thus, i guess (since this is basically a level-4 issue, we can call it closed?) http://www.openbsd.org/report.html
in particular, i made a pcidump-listing and another dmesg-listing (with the usb-keybd attached) which i will enclose after the line-breaks.... 2 - to try and add something useful, here are my notes on afterboot... http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man8/afterboot.8 a) PermitRootLogin no longer in samples of /etc/ssh/ssh_config and the keyword does not work iirc. (also sshd_config(5) incorrect ?) [i am not sure HOW it works, but rootLogin got disabled semi-magically during the install-procedure - and i have not tried leaving it enabled to determine what would need-to-be-done to deactivate it post-install] b) the routing-tables have slightly different format now (ipv4 uses /mask) also /etc/mygate file no longer exists and did not seem create-able to me... hth, h. -------- OpenBSD 5.7 (GENERIC) #738: Sun Mar 8 10:59:31 MDT 2015 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Celeron(R) CPU 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF real mem = 2138001408 (2038MB) avail mem = 2090708992 (1993MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: date 01/03/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (59 entries) bios0: vendor Dell Computer Corporation version "A01" date 01/03/2006 bios0: Dell Computer Corporation Dell DE051 acpi0 at bios0: rev 0 acpi0: sleep states S0 S1 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC BOOT acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3) PCI1(S5) KBD_(S3) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 132MHz ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PCI1) acpicpu0 at acpi0 acpibtn0 at acpi0: VBTN bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800! pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02 vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02 intagp0 at vga1 agp0 at intagp0: aperture at 0xe8000000, size 0x8000000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1280x1024 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 19 uhci2 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 int 16 ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 1 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2 pci1 at ppb0 bus 1 uhci3 at pci1 dev 1 function 0 "VIA VT83C572 USB" rev 0x62: apic 1 int 22 uhci4 at pci1 dev 1 function 1 "VIA VT83C572 USB" rev 0x62: apic 1 int 21 ehci1 at pci1 dev 1 function 2 "VIA VT6202 USB" rev 0x65: apic 1 int 20 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "VIA EHCI root hub" rev 2.00/1.00 addr 1 fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 int 20, address 00:16:76:39:fb:e0 inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 usb2 at uhci3: USB revision 1.0 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci4: USB revision 1.0 uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: <WDC WD1600JB-75GVA0> wd0: 16-sector PIO, LBA48, 152587MB, 312500000 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <_NEC, DVD+-RW ND-3530A, 103C> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic 1 int 17 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2100CL2.5 spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC2100CL2.5 usb4 at uhci0: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb5 at uhci1: USB revision 1.0 uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb6 at uhci2: USB revision 1.0 uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at ichpcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 umass0 at uhub1 port 4 configuration 1 interface 0 "Kingston DataTraveler 2.0" rev 2.00/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 0/direct removable serial.09511603F9B0C5760CD0 sd0: 7634MB, 512 bytes/sector, 15636304 sectors uhidev0 at uhub4 port 1 configuration 1 interface 0 "Cypress Sem PS2/USB Browser Combo Mouse" rev 1.00/0.00 addr 2 uhidev0: iclass 3/1 ums0 at uhidev0: 5 buttons, Z dir wsmouse0 at ums0 mux 0 uhidev1 at uhub4 port 2 configuration 1 interface 0 " USB Keyboard" rev 1.10/3.10 addr 3 uhidev1: iclass 3/1 ukbd0 at uhidev1: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev2 at uhub4 port 2 configuration 1 interface 1 " USB Keyboard" rev 1.10/3.10 addr 3 uhidev2: iclass 3/0, 2 report ids uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev2 reportid 2: input=3, output=0, feature=0 vscsi0 at root scsibus3 at vscsi0: 256 targets softraid0 at root scsibus4 at softraid0: 256 targets root on wd0a (c5a29b62671ad6b7.a) swap on wd0b dump on wd0b pcidump: Domain /dev/pci0: 0:0:0: Intel 82865G Host 0x0000: Vendor ID: 8086 Product ID: 2570 0x0004: Command: 0106 Status: 2090 0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem prefetchable 32bit addr: 0xf0000000/0x08000000 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0x00e4: Capability 0x09: Vendor Specific 0:2:0: Intel 82865G Video 0x0000: Vendor ID: 8086 Product ID: 2572 0x0004: Command: 0007 Status: 0090 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem prefetchable 32bit addr: 0xe8000000/0x08000000 0x0014: BAR mem 32bit addr: 0xfeb80000/0x00080000 0x0018: BAR io addr: 0x0000efa8/0x0008 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0x00d0: Capability 0x01: Power Management 0:29:0: Intel 82801EB/ER USB 0x0000: Vendor ID: 8086 Product ID: 24d2 0x0004: Command: 0005 Status: 0280 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000ff80/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0:29:1: Intel 82801EB/ER USB 0x0000: Vendor ID: 8086 Product ID: 24d4 0x0004: Command: 0005 Status: 0280 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000ff60/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00 0:29:3: Intel 82801EB/ER USB 0x0000: Vendor ID: 8086 Product ID: 24de 0x0004: Command: 0005 Status: 0280 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000ff20/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 0:29:7: Intel 82801EB/ER USB2 0x0000: Vendor ID: 8086 Product ID: 24dd 0x0004: Command: 0106 Status: 0290 0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR mem 32bit addr: 0xffa80800/0x00000400 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 04 Line: 09 Min Gnt: 00 Max Lat: 00 0x0050: Capability 0x01: Power Management 0x0058: Capability 0x0a: Debug Port 0:30:0: Intel 82801BA Hub-to-PCI 0x0000: Vendor ID: 8086 Product ID: 244e 0x0004: Command: 0107 Status: 0080 0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: c2 0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00 0x0010: 00000000 0x0014: 00000000 0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1 Secondary Latency Timer: 20 0x001c: I/O Base: d0 I/O Limit: d0 Secondary Status: 2280 0x0020: Memory Base: fea0 Memory Limit: fea0 0x0024: Prefetch Memory Base: fff0 Prefetch Memory Limit: 0000 0x0028: Prefetch Memory Base Upper 32 Bits: 00000000 0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000 0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000 0x0038: Expansion ROM Base Address: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Bridge Control: 0002 0:31:0: Intel 82801EB/ER LPC 0x0000: Vendor ID: 8086 Product ID: 24d0 0x0004: Command: 010f Status: 0280 0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 0000 Product ID: 0000 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00 0:31:1: Intel 82801EB/ER IDE 0x0000: Vendor ID: 8086 Product ID: 24db 0x0004: Command: 0007 Status: 0280 0x0008: Class: 01 Subclass: 01 Interface: 8a Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR io addr: 0x000001f0/0x0008 0x0014: BAR io addr: 0x000003f4/0x0004 0x0018: BAR io addr: 0x00000170/0x0008 0x001c: BAR io addr: 0x00000374/0x0004 0x0020: BAR io addr: 0x0000ffa0/0x0010 0x0024: BAR mem 32bit addr: 0xfeb7fc00/0x00000400 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00 0:31:3: Intel 82801EB/ER SMBus 0x0000: Vendor ID: 8086 Product ID: 24d3 0x0004: Command: 0001 Status: 0280 0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000efe0/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 03 Min Gnt: 00 Max Lat: 00 1:1:0: VIA VT83C572 USB 0x0000: Vendor ID: 1106 Product ID: 3038 0x0004: Command: 0117 Status: 0210 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 62 0x000c: BIST: 00 Header Type: 80 Latency Timer: 40 Cache Line Size: 10 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000df00/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1106 Product ID: 3038 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00 0x0080: Capability 0x01: Power Management 1:1:1: VIA VT83C572 USB 0x0000: Vendor ID: 1106 Product ID: 3038 0x0004: Command: 0117 Status: 0210 0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 62 0x000c: BIST: 00 Header Type: 80 Latency Timer: 40 Cache Line Size: 10 0x0010: BAR empty (00000000) 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR io addr: 0x0000df20/0x0020 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1106 Product ID: 3038 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 02 Line: 09 Min Gnt: 00 Max Lat: 00 0x0080: Capability 0x01: Power Management 1:1:2: VIA VT6202 USB 0x0000: Vendor ID: 1106 Product ID: 3104 0x0004: Command: 0117 Status: 0210 0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 65 0x000c: BIST: 00 Header Type: 80 Latency Timer: 40 Cache Line Size: 10 0x0010: BAR mem 32bit addr: 0xfeafef00/0x00000100 0x0014: BAR empty (00000000) 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1106 Product ID: 3104 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 03 Line: 05 Min Gnt: 00 Max Lat: 00 0x0080: Capability 0x01: Power Management 1:8:0: Intel PRO/100 VE 0x0000: Vendor ID: 8086 Product ID: 1050 0x0004: Command: 0117 Status: 0290 0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 02 0x000c: BIST: 00 Header Type: 00 Latency Timer: 40 Cache Line Size: 10 0x0010: BAR mem 32bit addr: 0xfeaff000/0x00001000 0x0014: BAR io addr: 0x0000df40/0x0040 0x0018: BAR empty (00000000) 0x001c: BAR empty (00000000) 0x0020: BAR empty (00000000) 0x0024: BAR empty (00000000) 0x0028: Cardbus CIS: 00000000 0x002c: Subsystem Vendor ID: 1028 Product ID: 01d5 0x0030: Expansion ROM Base Address: 00000000 0x0038: 00000000 0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 08 Max Lat: 38 0x00dc: Capability 0x01: Power Management On Tue, Jul 7, 2015 at 12:31 PM, harold felton <hfeltonad...@hfelton.com> wrote: > howdee, > > first time sending a msg to these lists, so i thought id post here first... > > below the line will be the email-details that i would send to bugs@ which > actually describes my problem... > > on-a-second-unrelated-topic, the afterboot man-page is a bit out-of-date... > > if either of these issues is addressed somewhere i did not find, then > please point me at the correct info... tyvm, h. > > ---------------------- > > To: b...@openbsd.org > Subject: ps2 kybd not working on reboot > From: hfeltonadmin > Cc: hfeltonadmin > Reply-To: hfeltonadmin > > >Synopsis: ps2 kybd not working on reboot > >Category: i386 > >Environment: > System : OpenBSD 5.7 > Details : OpenBSD 5.7 (GENERIC) #738: Sun Mar 8 10:59:31 MDT > 2015 > dera...@i386.openbsd.org: > /usr/src/sys/arch/i386/compile/GENERIC > > Architecture: OpenBSD.i386 > Machine : i386 > >Description: > i am unable to use an attached ps2-keyboard after reboot or > from first-boot after successful install... > >How-To-Repeat: > 1 - i was able to use an attached ps2-keyboard and vga-monitor > (no mouse needed) to install (from cd burned of 57-iso)... > 2 - upon first-reboot after installation, the ps2-keybd became > non-responsive... (ie - unable to type username at login) > 3 - following ancient debug-trails i tried (and succeeded?) by > using the following procedures: > a- boot> boot -c > UKC> find pckbc > UKC> change pckbc0 > .....flags[0] to 1 > UKC> exit > b- sudo config -e -o /bsd.1 /bsd > (identical UKC items, as above) > c- boot> boot /bsd.1 > 4 - 3.a) allowed kybd to work, 3.b) SEEMS ok, 3.c) no good ??? > when i moved the bsd.1 into /bsd for permanent-fix, i can > boot> boot -c > and see that the pckbc0 flag is already 0x1, but not working? > (ie - hit return on flags[1] allows kybd to work again) > >Fix: > unknown - i suspect there might be an issue about "quit" vs. > "exit" at the conclusion of the UKC> and/or config-steps, > but i am now too-confused to sort things out... > NB - ssh from another box is how i am/was-able to get things > working at-all and will probably be my final-solution, but > not having the ability to plug in a kybd/monitor and reboot > into a working system (without -c) is annoying. > > tia, h. > > dmesg: > OpenBSD 5.7 (GENERIC) #738: Sun Mar 8 10:59:31 MDT 2015 > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > cpu0: Intel(R) Celeron(R) CPU 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz > cpu0: > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,CNXT-ID,xTPR,PERF > real mem = 2138001408 (2038MB) > avail mem = 2090708992 (1993MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: date 01/03/06, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 > @ 0xf0450 (59 entries) > bios0: vendor Dell Computer Corporation version "A01" date 01/03/2006 > bios0: Dell Computer Corporation Dell DE051 > acpi0 at bios0: rev 0 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP SSDT APIC BOOT > acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) > USB3(S3) PCI1(S5) KBD_(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 132MHz > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins > ioapic0: misconfigured as apic 0, remapped to apid 1 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (PCI1) > acpicpu0 at acpi0 > acpibtn0 at acpi0: VBTN > bios0: ROM list: 0xc0000/0xa800 0xca800/0x1800! > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > pchb0 at pci0 dev 0 function 0 "Intel 82865G Host" rev 0x02 > vga1 at pci0 dev 2 function 0 "Intel 82865G Video" rev 0x02 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xe8000000, size 0x8000000 > inteldrm0 at vga1 > drm0 at inteldrm0 > inteldrm0: 1280x1024 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: apic 1 > int 16 > uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: apic 1 > int 19 > uhci2 at pci0 dev 29 function 3 "Intel 82801EB/ER USB" rev 0x02: apic 1 > int 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB2" rev 0x02: apic 1 > int 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xc2 > pci1 at ppb0 bus 1 > uhci3 at pci1 dev 1 function 0 "VIA VT83C572 USB" rev 0x62: apic 1 int 22 > uhci4 at pci1 dev 1 function 1 "VIA VT83C572 USB" rev 0x62: apic 1 int 21 > ehci1 at pci1 dev 1 function 2 "VIA VT6202 USB" rev 0x65: apic 1 int 20 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 "VIA EHCI root hub" rev 2.00/1.00 addr 1 > fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VE" rev 0x02, i82562: apic 1 > int 20, address 00:16:76:39:fb:e0 > inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0 > usb2 at uhci3: USB revision 1.0 > uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci4: USB revision 1.0 > uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 > ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02 > pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02: DMA, > channel 0 configured to compatibility, channel 1 configured to compatibility > wd0 at pciide0 channel 0 drive 0: <WDC WD1600JB-75GVA0> > wd0: 16-sector PIO, LBA48, 152587MB, 312500000 sectors > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 > atapiscsi0 at pciide0 channel 1 drive 0 > scsibus1 at atapiscsi0: 2 targets > cd0 at scsibus1 targ 0 lun 0: <_NEC, DVD+-RW ND-3530A, 103C> ATAPI 5/cdrom > removable > cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 > ichiic0 at pci0 dev 31 function 3 "Intel 82801EB/ER SMBus" rev 0x02: apic > 1 int 17 > iic0 at ichiic0 > spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2100CL2.5 > spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM non-parity PC2100CL2.5 > usb4 at uhci0: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb5 at uhci1: USB revision 1.0 > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb6 at uhci2: USB revision 1.0 > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at ichpcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 > pckbd0 at pckbc0 (kbd slot) > pckbc0: using irq 1 for kbd slot > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > umass0 at uhub1 port 4 configuration 1 interface 0 "Kingston DataTraveler > 2.0" rev 2.00/1.00 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd0 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00> SCSI2 > 0/direct removable serial.09511603F9B0C5760CD0 > sd0: 7634MB, 512 bytes/sector, 15636304 sectors > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on wd0a (c5a29b62671ad6b7.a) swap on wd0b dump on wd0b > > usbdevs: > Controller /dev/usb0: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 powered > port 5 powered > port 6 powered > port 7 powered > port 8 powered > Controller /dev/usb1: > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), > VIA(0x1106), rev 1.00 > port 1 powered > port 2 powered > port 3 powered > port 4 addr 2: high speed, power 100 mA, config 1, DataTraveler > 2.0(0x1603), Kingston(0x0951), rev 1.00, iSerialNumber > 0019E00149FCF9B0C5760CD0 > Controller /dev/usb2: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > VIA(0x1106), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb3: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > VIA(0x1106), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb4: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb5: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > Controller /dev/usb6: > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), > Intel(0x8086), rev 1.00 > port 1 powered > port 2 powered > -- harold at hfelton.com
