I acquired a Dell Latitude D610 (including docking station, expansion-bay
HDD and a bunch of other accessories) from a friend. I've been running
OpenBSD on it since around the time 5.6 came out. I'm running 5.7-RELEASE
with all patches applied.

The screen (perhaps only the backlight) won't come back from a lid closure
screen blank. Waking from suspend or hibernate will bring it back. Using
xset s activate (which should blank the screen) followed by a key press to
wake the display will also bring it back. I have disabled
machdep.lidsuspend because I frequently run this system in the docking
station with the lid closed and generally don't want my laptops suspending
when closed.

It's a minor annoyance, but I'm wondering if there's something I could do
to fix the screen blanking issue. I'm not having much luck finding anything
useful in the wscons/wsdisplay man pages. Ideas?

Also, bwi(4) doesn't work on this system. There was a patch posted back in
December against 5.6, but I'm just running a tiny urtwn(4) that seems to be
working great.

dmesg; sysctl hw.sensors follows.


OpenBSD 5.7 (GENERIC) #0: Sun Jul 19 23:33:46 CDT 2015
    r...@capture.labs.h-i-r.net:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.73GHz ("GenuineIntel" 686-class)
1.73 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE,NXE,EST,TM2,PERF
real mem  = 1064652800 (1015MB)
avail mem = 1034891264 (986MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/02/05, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3
@ 0xf7860 (60 entries)
bios0: vendor Dell Inc. version "A06" date 10/02/2005
bios0: Dell Inc. Latitude D610
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC ASF! MCFG SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S5) USB0(S0) USB1(S0) USB2(S0)
USB4(S0) USB3(S0) MODM(S3) PCIE(S4) NIC_(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 3 (PCIE)
acpicpu0 at acpi0: C3, C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 101 degC
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL MT2648" serial 2 type LION oem "Samsung
SDI"
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivideo1 at acpi0: VID_
acpivideo2 at acpi0: VID2
bios0: ROM list: 0xc0000/0xf800! 0xcf800/0x800
cpu0: Enhanced SpeedStep 1730 MHz: speeds: 1733, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1024x768
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82915GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: apic 1 int 16
pci1 at ppb0 bus 2
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): apic 1 int 16, address 00:14:22:ca:e3:f1
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: apic 1 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: apic 1 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: apic 1 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 3
cbb0 at pci2 dev 1 function 0 "TI PCI6515 CardBus" rev 0x00: apic 1 int 19
"TI PCI6515 CardBus" rev 0x00 at pci2 dev 1 function 5 not configured
bwi0 at pci2 dev 3 function 0 "Broadcom BCM4318" rev 0x02: apic 1 int 17,
address 00:14:a4:63:ce:94
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: apic 1 int
16, ICH6 AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2040AH>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide0 channel 1 drive 0: <TOSHIBA MK8032GAX>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
urtwn0 at uhub0 port 5 "Realtek 802.11n WLAN Adapter" rev 2.00/2.00 addr 2
urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address 00:13:ef:60:25:61
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd1a (214d35eb0b7d5ed7.a) swap on wd1b dump on wd1b

hw.sensors.acpitz0.temp0=47.50 degC (zone temperature)
hw.sensors.acpiac0.indicator0=Off (power supply)
hw.sensors.acpibat0.volt0=11.10 VDC (voltage)
hw.sensors.acpibat0.volt1=11.77 VDC (current voltage)
hw.sensors.acpibat0.current0=1.83 A (rate)
hw.sensors.acpibat0.amphour0=3.89 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.44 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.13 Ah (low capacity)
hw.sensors.acpibat0.amphour3=3.58 Ah (remaining capacity), OK
hw.sensors.acpibat0.amphour4=4.40 Ah (design capacity)
hw.sensors.acpibat0.raw0=1 (battery discharging), OK
hw.sensors.acpibtn0.indicator0=On (lid open)
hw.sensors.acpidock0.indicator0=Off (not docked), UNKNOWN

Reply via email to