Hi all,
I've just installed a 3.8 on a VIA DP system. In 2 days I had 2 crash
of the system :-(
The following was the error I had on the display
kernel: page fault trap,code=0
stopped ad npxdna_xmm +0x71: movl 0x12c(%ebx),%eax
ddb{0}>
But don't tell me to send trace and ps... when I get this error I
cannot write anymore... :-(
I'have tried also to compile a Gerneric kernel with the Debug part on,
but every time the error arrives before I end the compilation of the
kernel....
Could you help me please to understand how to make it work?
Leo
Here is the dmesg
ssh 192.168.1.7
Last login: Wed Dec 21 15:09:32 2005 from 192.168.1.5
OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
Welcome to OpenBSD: The proactively secure Unix-like operating system.
Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code. With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.
/home/z-lmutt $ dmesg
OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: VIA Nehemiah ("CentaurHauls" 686-class) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,APIC,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE
real mem = 467116032 (456168K)
avail mem = 419094528 (409272K)
using 4278 buffers containing 23457792 bytes (22908K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(f0) BIOS, date 08/17/05, BIOS32 rev. 0 @ 0xfa2a0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xcaf4
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfca40/176 (9 entries)
pcibios0: PCI Exclusive IRQs: 10 11 12
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xef000/0x1000!
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: RNG AES
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: VIA Nehemiah ("CentaurHauls" 686-class) 1 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
ioapic0: misconfigured as apic 0, remapped to apic 2
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA PM800 AGP" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA PM800 Errors" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA PM800 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PM800 DRAM" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA PM800 PMC" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA PM800 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA PM800 Unichrome S3" rev 0x02:
aperture at 0xf0000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 9 function 0 "Intel 82557" rev 0x10, i82551: apic 2 int
17 (irq 11), address 00:e0:81:55:cf:5f
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vge0 at pci0 dev 10 function 0 "VIA VT612x" rev 0x11: apic 2 int 18 (irq
12), address 00:e0:81:55:cf:5d
ciphy0 at vge0 phy 1: Cicada CS8201 10/100/1000TX PHY, rev. 2
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using apic 2 int 20 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <HDT722525DLA380>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4320B, 1.00> SCSI0
5/cdrom removable
cd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 ignored (disabled)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int
21 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int
21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int
21 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int
21 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21
(irq 12)
ehci0: timed out waiting for BIOS
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: apic 2 int
22 (irq 12)
ac97: codec id 0x49434552 (ICEnsemble VIA VT1616i)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: apic 2 int 23
(irq 10) address 00:e0:81:55:cf:5e
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x004063, model 0x0032, rev. 10
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lm0 at isa0 port 0x290/8: W83697HF
npx0 at isa0 port 0xf0/16: using exception 16
biomask 0 netmask 0 ttymask 0
pctr: user-level cycle counter enabled
apm0: disconnected
uhub5 at uhub4 port 2
uhub5: D-Link product 0xf103, rev 2.00/1.00, addr 2
uhub5: 7 ports with 5 removable, self powered, single transaction translator
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Comfort Curve Keyboard 2000, rev 2.00/1.73, addr 2,
iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Microsoft Comfort Curve Keyboard 2000, rev 2.00/1.73, addr 2,
iclass 3/0
uhidev1: 1 report ids
uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
cpu1: RNG AES
