more info: I'm running OpenBSD 5.4 yet, I checked the changelogs between -current and 5.4 and haven't seen improvements regarding ECMP and IPv6.
Maybe someone can point me in the right direction regarding my problem ? Thanks for your help, Romain -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Aviolat Romain Sent: mercredi 26 août 2015 07:16 To: '[email protected]' ([email protected]) Subject: OpenBSD ospf6d and ECMP Hi, I'm having troubles with ospf6d and equal cost multipath, I have a very simple setup with three routers, 2x Arista L3 switches and 1x OpenBSD box: Both switches are advertising the same subnets (for HA). Apparently OpenBSD does not push two routes into the FIB but only the first received. Here's the ospf6d setup: ####### router-id 1.1.1.2 area 0.0.0.0 { interface vlan5 { } } ####### Here's the RIB content: ospf6ctl show rib ::/0 fe80::21c:73ff:fe68:fda5%vlan5 Type 2 ext Network 10 08:03:03 ::/0 fe80::21c:73ff:fecd:cb09%vlan5 Type 2 ext Network 10 04:20:14 And the FIB content: ospf6ctl show fib *O ::/0 fe80::21c:73ff:fe68:fda5%vlan5 Of course I activated the multipath sysctl option net.inet6.ip6.multipath=1 Romain Aviolat Senior System Administrator R&D and Ops Infrastructure Kudelski Security - Kudelski Group Rte de Genève 22-24, 1033 Cheseaux SWITZERLAND +41 21 732 03 79
