This is 5.8-current on an ALIX (dmesg below), used as my home router.
The upstream connection is an ethernet, the other two ethernets are
the internal network and the dmz, plus there is a ral(4) wifi.

I am experiencing Oerrs and device timeouts on the ral.

hans@gw:~$ ifconfig ral0
ral0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:11:09:0d:d3:36
        priority: 4
        groups: wlan
        media: IEEE802.11 autoselect hostap (autoselect mode 11b hostap)
        status: active
        ieee80211: nwid stare.cz chan 11 bssid 00:11:09:0d:d3:36 wpakey <not 
displayed> wpaprotos wpa1,wpa2 wpaakms psk wpaciphers tkip,ccmp wpagroupcipher 
tkip 100dBm
        inet 192.168.112.1 netmask 0xffffff00 broadcast 192.168.112.255

hans@gw:~$ netstat -i
Name    Mtu   Network     Address              Ipkts Ierrs    Opkts Oerrs Colls
lo0     32768 <Link>                            3229     0     3229     0     0
lo0     32768 fe80::%lo0/ fe80::1%lo0           3229     0     3229     0     0
lo0     32768 localhost/1 localhost             3229     0     3229     0     0
lo0     32768 127/8       localhost             3229     0     3229     0     0
vr0     1500  <Link>      00:0d:b9:12:9f:2c 34776087     0 24076275     0     0
vr0     1500  192.168.167 192.168.167.1     34776087     0 24076275     0     0
vr1     1500  <Link>      00:0d:b9:12:9f:2d 16420441     0 27179401     0     0
vr1     1500  192.168.111 gw.stare.cz       16420441     0 27179401     0     0
vr2     1500  <Link>      00:0d:b9:12:9f:2e  7785814     0  7597590     0     0
vr2     1500  192.168.222 192.168.222.1      7785814     0  7597590     0     0
ral0    1500  <Link>      00:11:09:0d:d3:36   488808 62712   657003 14631     0
ral0    1500  192.168.112 192.168.112.1       488808 62712   657003 14631     0
enc0*   0     <Link>                               0     0        0     0     0
pflog0  33192 <Link>                               0     0   163817     0     0


What can I do to debug this? Is there a way to tell which client
(there is two androids and a macbook) this happened to?
Is the client relevant, or is this a problem of the ral itself?

        Thank you for your time

                Jan


OpenBSD 5.8-current (GENERIC) #1092: Mon Aug 24 11:58:09 MDT 2015
    dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 432 
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem  = 133713920 (127MB)
avail mem = 118882304 (113MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 12/10/07, BIOS32 rev. 0 @ 0xfceb2
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 
00:0d:b9:12:9f:2c
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 
00:0d:b9:12:9f:2d
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12, address 
00:0d:b9:12:9f:2e
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, 
model 0x0034
ral0 at pci0 dev 12 function 0 "Ralink RT2560" rev 0x01: irq 9, address 
00:11:09:0d:d3:36
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 
3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ELITE PRO CF CARD 8GB>
wd0: 1-sector PIO, LBA, 7279MB, 14909328 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 15, version 1.0, 
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 15
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (bf940e6c7aaf2c50.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout
ral0: device timeout

Reply via email to