Diana Eichert <deichert <at> wrench.com> writes: > > Posting capture of all boot message would be useful. > > There may only be one DSR-500N running OpenBSD, Paul's. I cc'd > him, 'cause I'm not sure if he reads misc <at> . > > diana > > On Sat, 5 Sep 2015, Roberto Katalinic wrote: > > > I have a Dlink DSR-1000N and want to install OpenBSD on it. > > > > I saw the DSR-500 as a supported device on the octeon list and was hoping > > the
hoping the > > 1000n would be as well. > > I didn't get very far - "Error allocating memory for elf image!" when > > booting booting > > the kernel. > > > > Anyone knows if the 1000n is being worked on/supported? > > > > Regards, > > Roberto > > Hi Diana, Below is the complete output from device start up through to the error mess message. Hope it helps Paul. >>>>>>>>>>>>>>>>>>>>> U-Boot 1.1.1 (Development build, svnversion: exported) (Build time: Sep 1 2010 - 16:18:38) Warning: Board descriptor tuple not found in eeprom, using defaults CUST_DSR1000N board revision major:2, minor:0, serial #: unknown OCTEON CN5010-SCP pass 1.1, Core clock: 500 MHz, DDR clock: 200 MHz (400 Mhz Mhz data rate) DRAM: 256 MB Flash: 32 MB *** Warning - bad CRC, using default environment Clearing DRAM...... done BIST check passed. Starting PCI PCI Status: PCI 32-bit PCI BAR 0: 0x00000000, PCI BAR 1: Memory 0x00000000 PCI 0xf8000000 Net: octeth0, octeth1, octeth2 Hit any key to stop autoboot: 0 D-Link DSR-1000N bootloader# dhcp Interface 0 has 3 ports (RGMII) BOOTP broadcast 1 octeth0: Up 1000 Mbps Full duplex (port 0) DHCP client bound to address 192.168.10.201 D-Link DSR-1000N bootloader# tftpboot 0 bsd.rd Using octeth0 device TFTP from server 192.168.10.60; our IP address is 192.168.10.201 Filename 'bsd.rd'. Load address: 0xaa00000 Loading: ##################################################### done Bytes transferred = 7548970 (73302a hex), 7514 Kbytes/sec D-Link DSR-1000N bootloader# bootoctlinux ELF file is 64 bit Attempting to allocate memory for ELF segment: addr: 0xffffffff81000000 ( (adjusted to: 0x0000000001000000), size 0x764600 Allocated memory for ELF segment: addr: 0xffffffff81000000, size 0x764600 Attempting to allocate memory for ELF segment: addr: 0xffffffff816ec790 (ad (adjusted to: 0x00000000016ec790), size 0x2400 Error allocating memory for elf image! ## ERROR loading File! D-Link DSR-1000N bootloader#
